Terminal Blocks, IEC

Catalogs > Industrial Controls Catalog > Terminal Blocks and Wiring Systems > Terminal Blocks, IEC > Screw Connection Terminal Blocks

Screw Connection Terminal Blocks

Introduction Mini-Blocks Standard Feed-Through Blocks High Current Blocks Space-Saver Feed-Through Blocks Multi-Circuit Feed-Through Blocks Specialty Feed-Through Blocks
Stab-Connect Feed-Through Blocks Sensor Blocks Grounding Blocks Space-Saver Grounding Blocks Isolation Blocks Plug-in Style Terminal Blocks Double Level Plug-in Style Blocks with Ground
Internal Component Blocks Thermocouple Blocks 2-Level Neutral Disconnect and Installation Blocks Single-Circuit Neutral Disconnect Blocks Fuse Blocks Plug-in Connection Blocks Short-Circuit Current Ratings
High Current Blocks

  1492-J120 1492-JG120
Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block.
Click to enlarge - 1492-J120-c_cmyk_dims Click to enlarge - 1492-JG120-c_cmyk_dims
Specifications Feed-through terminal block Feed-through ground block
Certifications Click to enlarge - UR Logo CSA IEC Click to enlarge - UR Logo CSA IEC
Voltage Rating 1000V
AC/DC
Maximum Current 228 A 220 A 269 A
Wire Range (Rated Cross Section) #4…250 MCM AWG #4…4/0 AWG 16…120 mm2 #4…3/0 AWG #4…4/0 AWG 16...95 mm2
Wire Strip Length 1.06 in. (27 mm) 1.06 in. (27 mm)
Recommended Tightening Torque 141.6 lb•in. (16.0 N•m) 88.5 lb•in. (10 N•m)
Density 11 pcs/ft (37 pcs/m) 11 pcs/ft (37 pcs/m)
Housing Temperature Range -58...+248 °F (-50...+120 °C) -58...+248 °F (-50...+120 °C)
Short-Circuit Current Rating See Fuse Ratings

Terminal Blocks

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.
Color: Grey 1492-J120 5
  Green/Yellow 1492-JG120 5
  Beige

Accessories

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.
Mounting Rails:
    1 m Symmetrical heavy Duty DIN (Steel/Unslotted)
199-DR4 5
    1 m Symmetrical Heavy Duty DIN (Copper Unslotted) 1492-DR8 5 1492-DR8 5
    1 m Symmetrical heavy Duty DIN (Steel/Slotted) 1492-DR9 5
End Barrier Not Required Not Required
End Anchors and Retainers:
    End Anchor — Heavy Duty
1492-EAHJ35 50 1492-EAHJ35 50
Jumpers:
    Screw Center Jumper — 2-pole
1492-CJJ27-2 5
    Screw Center Jumper — 3-pole 1492-CJJ27-3 5
    Screw Center Jumper — 4-pole 1492-CJJ27-4 5
    Side Jumper — 2-pole
    SideJumper — 3-pole
Other Accessories:
    Group Marking Carrier
1492-GM35 25 1492-GM35 25
Marking Systems:
    Snap-in Marker Cards
1492-MR8X12 (84/card) 5 1492-MR8X12 (84/card) 5
1492-M7X12 (108/card) 5 1492-M7X12 (108/card) 5