Terminal Blocks, IEC

Catalogs > Industrial Controls Catalog > Terminal Blocks and Wiring Systems > Terminal Blocks, IEC > Screw Connection Terminal Blocks

Screw Connection Terminal Blocks

Introduction Mini-Blocks Standard Feed-Through Blocks Space-Saver Feed-Through Blocks Multi-Circuit Feed-Through Blocks Specialty Feed-Through Blocks Stab-Connect Feed-Through Blocks
Sensor Blocks Grounding Blocks Space-Saver Grounding Blocks Isolation Blocks Plug-in Style Terminal Blocks Double Level Plug-in Style Blocks with Ground Internal Component Blocks
Thermocouple Blocks Neutral Disconnect and Installation Blocks Single-Circuit Neutral Disconnect Blocks Fuse Blocks Plug-in Connection Blocks Short-Circuit Current Ratings
Stab-Connect Feed-Through Blocks

  1492-J3F 1492-JD3F
Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block. 		Click to enlarge - 102180000040-dm Click to enlarge - 102160000040-dm
Specifications Feed-through terminal block with stab connections on one side Two-level, two-circuit feed-through terminal block with stab connections on one side
Certifications Click to enlarge - UR Logo CSA IEC Click to enlarge - UR Logo CSA IEC
Voltage Rating 300V AC/DC 500V AC/DC 300V AC/DC 400V AC/DC
Maximum Current 16 A 10 A 16 A (2 x 8) 10 A 16 A (2 x 8)
Wire Range (Rated Cross Section) #22…12 AWG #26…12 AWG 2.5 mm2 #22…12 AWG #26…12 AWG 2.5 mm2
Wire Strip Length 0.39 in. (10 mm) 0.39 in. (10 mm)
Recommended Tightening Torque 4.5…7.1 lb•in. (0.5…0.8 N•m) 4.5…7.1 lbvin. (0.5…0.8 N•m)
Density   59 pcs/ft (196 pcs/m) 59 pcs/ft (196 pcs/m)
Housing Temperature Range –58…+248 °F (–50…+120 °C) –58…+248 °F (–50…+120 °C)
Short-Circuit Current Rating See Fuse Ratings

Terminal Blocks
Cat. No.
Pkg Qty.
Cat. No.
Pkg Qty.
Color: Grey 1492-J3F 50 1492-JD3F 50

Accessories
Cat. No.
Pkg Qty.
Cat. No.
Pkg Qty.
Mounting Rails:
    1 m Symmetrical DIN (Steel) 		199-DR1 10 199-DR1 10
    1 m Symmetrical DIN (Aluminum) 1492-DR5 10 1492-DR5 10
    1 m Hi-Rise Sym. DIN (Aluminum) 1492-DR6 2 1492-DR6 2
    1 m Angled Hi-Rise Sym. DIN (Steel) 1492-DR7 2 1492-DR7 2
End Barrier 1492-EBJ3 50 1492-EBJD3 20
End Anchors and Retainers:
    Screwless End Retainer 		1492-ERL35 20 1492-ERL35 20
    DIN Rail — Normal Duty 1492-EAJ35 100 1492-EAJ35 100
    DIN Rail — Heavy Duty 1492-EAHJ35 50 1492-EAHJ35 50
Fast-on Connector (Size 0.110 in.) 800M-NT2 100 800M-NT2 100
Connector Insulation Sleeve 1492-FCS 100 1492-FCS 100
Jumpers:
    Screw Center Jumper — 10-pole 		1492-CJJ5-10 20 1492-CJJ5-10 20
    Screw Center Jumper — 4-pole 1492-CJJ5-4 50 1492-CJJ5-4 50
    Screw Center Jumper — 3-pole 1492-CJJ5-3 50 1492-CJJ5-3 50
    Screw Center Jumper — 2-pole 1492-CJJ5-2 50 1492-CJJ5-2 50
    Insulated Side Jumper — 24-Pole 1492-SJ5B-24 50 1492-SJ5A-24 50
    Insulated Side Jumper — 10-Pole 1492-SJ5B-10 50 1492-SJ5A-10 50
    Screw Type Jumper Notching Tool 1492-T1 1 1492-T1 1
Other Accessories:
    Partition Plate 		1492-EBJ16 20 1492-PPJD3 20
Marking Systems:
    Snap-in marker cards 		1492-M5X12 (144/card) 5 1492-M5X8 (144/card) 5
    Snap-in marker cards 1492-M5X5 (200/card) 5 1492-M5X5 (200/card) 5