Terminal Blocks, IEC

Catalogs > Industrial Controls Catalog > Terminal Blocks and Wiring Systems > Terminal Blocks, IEC > Spring-Clamp Connection Terminal Blocks

Spring-Clamp Connection Terminal Blocks

Introduction Mini-Blocks with Center Jumper Option Mini-Blocks, Interlocking, 600V UL Rated Mini-Blocks, Panel Mount Standard Feed-Through Blocks Power Distribution Blocks
Multi-Circuit Feed-Through Blocks Specialty Feed-Through Blocks Sensor Blocks Grounding Blocks Isolation Blocks Plug-in Style Blocks and Analog Loop Control Block
Flexible Plug-in Connection Blocks Internal Component Blocks Neutral Disconnect and Installation Blocks Fuse Blocks Comb Connection Blocks Short-Circuit Current Ratings
Mini-Blocks, Panel Mount

  1492-LMP3 T  1492-LMP3Q T 
Dimensions are not intended to be used for manufacturing purposes.
Note: One end block and one end barrier or two end barriers must be used on each end of a terminal bank to provide mounting slots. 		Click to enlarge - 170435000040_LMP3 Click to enlarge - 170435000040_LMP3Q
Specifications Mini surface mount feed-through
terminal block 		Mini surface mount, feed-through terminal block with 2 connection points on each side
Certifications Click to enlarge - UR Logo CSA IEC Click to enlarge - UR Logo CSA IEC
Voltage Rating 600V AC/DC 800V AC/DC 600V AC/DC 800V AC/DC
Maximum Current 20 A 25 A 24 A 20 A 25 A 24 A
Wire Range (Rated Cross Section) #26…12 AWG 2.5 mm2 #26…12 AWG 2.5 mm2
Wire Strip Length 0.39 in. (10 mm) 0.39 in. (10 mm)
Density   59 pcs/ft (196 pcs/m) 30 pcs/ft (99 pcs/m)
Housing Temperature Range –58…+248 °F (–50…+120 °C) –58…+248 °F (–50…+120 °C)

Terminal Blocks
Cat. No.
Pkg Qty.
Cat. No.
Pkg Qty.
Color Grey 1492-LMP3 100 1492-LMP3Q 100
  Blue 1492-LMP3-B 100 1492-LMP3Q-B 100
End Terminal Blocks (with Mounting Brackets)
Color 		  
Grey 		1492-LMP3E 50 1492-LMP3QE 50
  Blue 1492-LMP3E-B 50 1492-LMP3QE-B 50

Accessories
Cat. No.
Pkg Qty.
Cat. No.
Pkg Qty.
Mounting Foot¬  1492-MFLM 50 1492-MFLM 50
Jumpers
    Side Center Jumper — 2-Pole 		1492-SJLM5-2 50 1492-SJLM5-2 50
    Side Jumper Installation Tool 1492-TAL5-2 1 1492-TAL5-2 1
End Barriers (with Mounting Slots) Grey 1492-EBLMP3 50 1492-EBLMP3 50
  Blue 1492-EBLMP3-B 50 1492-EBLMP3-B 50
Marking Systems
    Snap-In Marker Cards 		1492-M5X10 (144/card) 5 1492-M5X10 (144/card) 5
    Snap-In Marker Cards 1492-M5X5 (200/card) 5 1492-M5X5 (200/card) 5
    Hinged Marker Cards 1492-MH5X10 (96/card) 5 1492-MH5X10 (96/card) 5
  
T For a grouping of terminal blocks, use 1 end terminal block, select the number of terminal blocks, and use 1 end barrier. You can also use a group of terminal blocks with an end barrier on each end.
¬ Allows mounting to 15 mm and 35 mm DIN Rail. Recommended spacing is every fifth block on Cat. No. 1492-LMP3 and every third block on Cat. No. 1492-LMP3Q.