Terminal Blocks, IEC

Catalogs > Industrial Controls Catalog > Terminal Blocks and Wiring Systems > Terminal Blocks, IEC > Spring-Clamp Connection Terminal Blocks

Spring-Clamp Connection Terminal Blocks

Introduction Mini-Blocks with Center Jumper Option Mini-Blocks, Interlocking, 600V UL Rated Mini-Blocks, Panel Mount Standard Feed-Through Blocks Power Distribution Blocks
Multi-Circuit Feed-Through Blocks Specialty Feed-Through Blocks Sensor Blocks Grounding Blocks Isolation Blocks Plug-in Style Blocks and Analog Loop Control Block
Flexible Plug-in Connection Blocks Internal Component Blocks Neutral Disconnect and Installation Blocks Fuse Blocks Comb Connection Blocks Short-Circuit Current Ratings
Specialty Feed-Through Blocks

  1492-LD2C 1492-LD3C 1492-LD4C
Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block. 		Click to enlarge - 179113000040-dm Click to enlarge - 179103000040-dm Click to enlarge - 867070000040-dm
Specifications Two-level feed-through terminal block with commoning bar Two-level feed-through terminal block with commoning bar Two-level feed-through terminal block with commoning bar
Certifications Click to enlarge - UR Logo CSA IEC Click to enlarge - UR Logo CSA IEC ATEX Click to enlarge - UR Logo CSA IEC
Voltage Rating 300V AC/DC 600V AC/DC 500V
AC/DC 		600V AC/DC 800V AC/DC 550V AC/DC 600V AC/DC 800V AC/DC
Maximum Current 10 A 17.5 A 20 A 25 A 24 A 22 A 25 A 30 A 32 A
Wire Range (Rated Cross Section) #28…16 AWG 1.5 mm2 #30…12 AWG 2.5 mm2 0.5…2.5 mm2
(#20…14 AWG) 		#26…10 AWG 4 mm2
Wire Strip Length 0.39 in. (10 mm) 0.39 in. (10 mm) 0.39 in. (10 mm)
Density   87 pcs/ft (285 pcs/m) 59 pcs/ft (196 pcs/m) 49 pcs/ft (163 pcs/m)
Housing Temperature Range –58…+248 °F (–50…+120 °C) –58…+248 °F (–50…+120 °C) –58…+248 °F (–50…+120 °C)

Terminal Blocks
Cat. No.
Pkg Qty.
Cat. No.
Pkg Qty.
Cat. No.
Pkg Qty.
Color: Grey 1492-LD2C 50 1492-LD3C 25 1492-LD4C 25

Accessories
Cat. No.
Pkg Qty.
Cat. No.
Pkg Qty.
Cat. No.
Pkg Qty.
Mounting Rails:
    1 m Symmetrical DIN (Steel) 		199-DR1 10 199-DR1 10 199-DR1 10
    1 m Symmetrical DIN (Aluminum) 1492-DR5 10 1492-DR5 10 1492-DR5 10
    1 m Hi-Rise Sym. DIN (Aluminum) 1492-DR6 2 1492-DR6 2 1492-DR6 2
    1 m Angled Hi-Rise Sym. DIN (Steel) 1492-DR7 2 1492-DR7 2 1492-DR7 2
End Barriers Grey 1492-EBLD2 50 1492-EBLD3 20 1492-EBLD4 20
End Anchors and Retainers
    Screwless End Retainer 		1492-ERL35 20 1492-ERL35 20 1492-ERL35 20
    DIN Rail — Normal Duty 1492-EAJ35 100 1492-EAJ35 100 1492-EAJ35 100
    DIN Rail — Heavy Duty 1492-EAHJ35 50 1492-EAHJ35 50 1492-EAHJ35 50
Jumpers:
    Plug-in Center Jumper — 50-Pole 		— — 1492-CJK5-50 10 — —
    Plug-in Center Jumper — 10-Pole 1492-CJL4-10 20 1492-CJK5-10 20 1492-CJK6-10 20
    Plug-in Center Jumper — 9-Pole — — 1492-CJK5-9 20 1492-CJK6-9 20
    Plug-in Center Jumper — 8-Pole — — 1492-CJK5-8 20 1492-CJK6-8 20
    Plug-in Center Jumper — 7-Pole — — 1492-CJK5-7 20 1492-CJK6-7 20
    Plug-in Center Jumper — 6-Pole — — 1492-CJK5-6 20 1492-CJK6-6 20
    Plug-in Center Jumper — 5-Pole 1492-CJL4-5 60 1492-CJK5-5 20 1492-CJK6-5 20
    Plug-in Center Jumper — 4-Pole 1492-CJL4-4 60 1492-CJK5-4 60 1492-CJK6-4 60
    Plug-in Center Jumper — 3-Pole 1492-CJL4-3 60 1492-CJK5-3 60 1492-CJK6-3 60
    Plug-in Center Jumper — 2-Pole 1492-CJL4-2 60 1492-CJK5-2 60 1492-CJK6-2 60
Other Accessories:
    Reducing Sleeves 28…24 AWG
    (0.13…0.2 mm2) White 		1492-PSL2-2 100 1492-PSLS2-2 100 — —
    Reducing Sleeves 22…20 AWG
    (0.13…0.2 mm2) Grey 		1492-PSL2-5 100 1492-PSLS2-5 100 — —
    Test Plug 1492-TPL4 25 — — 1492-TP23 20
    Electrical Warning Plate 1492-EWPL4 20 — — 1492-EWPL6 20
Marking Systems:
    Snap-In Marker Cards 		1492-M3X12 (120/card)¬  5 1492-M5X10 (144/card) 5 1492-M6X10 (120/card) 5
    Snap-In Marker Cards 1492-M3X5 (100/card) 5 1492-M5X5 (200/card) 5 1492-M6X5 (200/card) 5
  
¬ May only be mounted in terminal block corner marking positions.