IEC Terminal Block Accessories

Mounting Rails

Mounting rails allow many blocks to be fastened in a panel with only a few screws to anchor the rail to the panel. Mounting rails allow easy installation and removal of a block in a row.

DIN Mounting Rails

Cat. No.		Description	Pkg Qty.	Dimensions¬
199-DR1		Symmetrical Rail 35 mm x 7.5 mm 3.28 ft (1 m) long Zinc-Plated Clear Chromated Steel EN60715     DIN #3	10
199-DR2		Same as Cat. No. 199-DR1, but length = 2 m	20
199-DR4		Heavy Duty Symmetrical Rail 35 mm x 15 mm 3.28 ft (1 m) long Zinc-Plated Clear Chromated Steel EN60715     DIN #3	5
1492-DR3		Mini 15 mm x 5.5 mm Rail 3.28 ft (1 m) long Zinc-Plated Clear Chromated Steel EN60715     DIN #2	5
1492-DR5		Symmetrical Rail 35 mm x 7.5 mm 3.28 ft (1 m) long Copper-Free Aluminum EN60715 For Bul. 1492 Terminal Blocks Only     DIN #3	10
T	1492-DR6	Symmetrical Rail 35 mm x 7.5 mm 2.26 in. (57.4 mm) high 3.28 ft (1 m) long Copper-Free Aluminum For Bul. 1492 Terminal Blocks Only     DIN #3	2
T	1492-DR7	Symmetrical Rail 35 mm x 7.5 mm 2.80 in. (71.0 mm) high 3.28 ft (1 m) long Angled 30° Zinc-Plated, Chromated Steel     DIN #3	2
1492-DR8		Symmetrical Rail 35 mm x 15 mm 3.28 ft (1 m) long Copper EN60715     DIN #3	5
‡	1492-DR9	Symmetrical Rail 35 mm x 15 mm 3.28 ft (1 m) long Zinc-Plated Clear Chromated Steel EN60715     DIN #3	5
¬ Dimensions shown in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.
T 0.218 x 0.50 in. (5.5 x 12.7 mm) slotted mounting holes every 3 in. (76.2 mm) starting 1.69 in. (42.9 mm) from end.
‡ Dimensions in millimeters.

End Barriers

End barriers are required to provide the necessary insulation for the last terminal block in a group.

Dimensions Width x Length x Height	For Use With	Color	Pkg Qty.	Cat. No.
0.08 x 1.14 x 2.03 in. (2 x 28.9 x 51.5 mm)	1492-L2, LG2	Grey	50	1492-EBL2
		Blue	50	1492-EBL2-B
		Yellow	50	1492-EBL2-Y
0.08 x 1.14 x 2.48 in. (2 x 28.9 x 63 mm)	1492-L2T, LG2T	Grey	50	1492-EBL2T
		Blue	50	1492-EBL2T-B
		Yellow	50	1492-EBL2T-Y
0.08 x 1.14 x 2.95 in. (2 x 28.9 x 75 mm)	1492-L2Q, LG2Q	Grey	50	1492-EBL2Q
		Blue	50	1492-EBL2Q-B
		Yellow	50	1492-EBL2Q-Y
0.08 x 1.15 x 2.34 in. (2 x 29.1 x 59.5 mm)	1492-L3, LG3, LKD3, L3P	Grey	50	1492-EBL3
		Blue	50	1492-EBL3-B
		Yellow	50	1492-EBL3-Y
0.08 x 1.20 x 2.54 in. (2 x 30.6 x 64.5 mm)	1492-L3T, LG3T	Grey	50	1492-EBL3T
		Blue	50	1492-EBL3T-B
		Yellow	50	1492-EBL3T-Y
0.08 x 1.20 x 3.11 in. (2 x 30.6 x 79 mm)	1492-L3Q, L3QS, LG3Q	Grey	50	1492-EBL3Q
		Blue	50	1492-EBL3Q-B
		Yellow	50	1492-EBL3Q-Y
0.10 x 1.06 x 2.8 in. (2.5 x 27 x 71 mm)	1492-L31P, 1492-LG31P	Grey	50	1492-EBL31P
		Yellow	50	1492-EBL31P-Y
	1492-L3T1P, 1492-LG3T1P	Grey	50	1492-EBL3T1P
		Yellow	50	1492-EBL3T1P-Y
0.08 x 1.20 x 3.11 in. (2 x 30.6 x 79 mm)	1492-L3Q2P	Grey	50	1492-EBL3Q2P
0.10 x 1.76 x 3.17 in. (2.5 X 44.7 x 80.5)	1492-LD32P	Grey	50	1492-EBLD32P
0.08 x 1.37 x 2.44 in. (2 x 34.85 x 62 mm)	1492-L4, LG4	Grey	50	1492-EBL4
		Blue	50	1492-EBL4-B
		Yellow	50	1492-EBL4-Y
0.08 x 1.37 x 3.31 in. (2 x 34.85 x 84 mm)	1492-L4T, LG4T	Grey	50	1492-EBL4T
		Blue	50	1492-EBL4T-B
		Yellow	50	1492-EBL4T-Y
0.08 x 1.37 x 4.13 in. (2 x 34.85 x 105 mm)	1492-L4Q, LG4Q	Grey	50	1492-EBL4Q
		Blue	50	1492-EBL4Q-B
		Yellow	50	1492-EBL4Q-Y
0.08 x 1.45 x 2.56 in. (2 x 36.95 x 65 mm)	1492-L6, LG6	Grey	50	1492-EBL6
		Blue	50	1492-EBL6-B
		Yellow	50	1492-EBL6-Y
0.08 x 1.45 x 3.54 in. (2 x 36.95 x 90 mm)	1492-L6T, LG6T	Grey	50	1492-EBL6T
		Blue	50	1492-EBL6T-B
		Yellow	50	1492-EBL6T-Y
0.12 x 1.67 x 2.89 in. (3 x 42.5 x 73.5 mm)	1492-L10, LG10	Grey	20	1492-EBL10
		Blue	20	1492-EBL10-B
		Yellow	20	1492-EBL10-Y
0.12 x 1.71 x 3.25 in. (3 x 43.5 x 82.5 mm)	1492-L16, LG16	Grey	20	1492-EBL16
		Blue	20	1492-EBL16-B
		Yellow	20	1492-EBL16-Y
—	1492-LAFB6	Black	50	1492-EBLAFB6
0.08 x 1.65 x 2.95 in. (2 x 41.9 x 75 mm)	1492-LD2, LDG2, LD2C, LDG2C	Grey	50	1492-EBLD2
		Blue	20	1492-EBLD2-B
		Yellow	20	1492-EBLD2-Y
0.08 x 1.87 x 2.85 in. (2 x 47.5 x 72.5 mm)	1492-LD3, LD3C, LDG3, LDG3C	Grey	20	1492-EBLD3
		Blue	20	1492-EBLD3-B
		Yellow	20	1492-EBLD3-Y
0.08 x 2.05 x 2.99 in. (2 x 52 x 76 mm)	1492-LD4, LD4C, LDG4, LDG4C, LD4DF, LD4DR, LD4RB…, LD4SS	Grey	20	1492-EBLD4
		Blue	20	1492-EBLD4-B
		Yellow	20	1492-EBLD4-Y

Dimensions Width x Length x Height	For Use With	Color	Pkg Qty.	Cat. No.
0.20 x 0.94 x 1.31 in. (5.1 x 23.8 x 33.3 mm)	1492-LMP3, LMP3Q	Grey	50	1492-EBLMP3
		Blue	50	1492-EBLMP3-B
0.20 x 0.94 x 1.31 in. (5.1 x 23.8 x 33.3 mm)	1492-LM3, LM3Q, LMG3, LMP3E, LMP3QE	Grey	50	1492-EBLM3
		Blue	50	1492-EBLM3-B
		Yellow	50	1492-EBLM3-Y
0.06 x 0.97 x 1.38 in. (1.5 x 24.65 x 35 mm)	1492-LMJ3, LMJG3	Grey	50	1492-EBLMJ3
		Blue	50	1492-EBLMJ3-B
		Yellow	50	1492-EBLMJ3-Y
0.06 x 2.32 x 4.35 in. (1.5 x 59 x 110.5 mm)	1492-LTF3	Grey	20	1492-EBLTF3
0.06 x 2.69 x 1.77 in. (5 x 68.5 x 45 mm)	1492-LS2-3, LS2-3L, LSG2-3		50	1492-EBLS2-3
0.20 x 3.2 x 1.77 in. (5 x 81.5 x 45 mm)	1492-LS2-4, LS2-4L, LSG2-4		50	1492-EBLS2-4
0.06 x 1.81 x 3.74 in. (1.5 x 46 x 95 mm)	1492-LDAG3, LDG3P		20	1492-EBLDAG3
0.10 x 1.04 x 1.81 in. (2.5 x 26.4 x 46 mm)	1492-LC3		20	1492-EBLC3
0.10 x 1.65 x 2.72 in. (2.5 x 41.85 x 69 mm)	1492-LDC3		20	1492-EBLDC3
	1492-LDG3ND, LD3N, LDG3N	Grey	20	1492-BSPJLD3N
	1492-LDG3ND, LD3N, LDG3N	Blue	20	1492-BSPJLD3N-B

End Anchor/End Retainers

End anchors and end retainers mount at both ends of a group of terminal blocks to add rigidity to the terminal assembly and prevent sliding along the rails.

End Anchors and End Retainers

Photo	Dimensions Width x Length x Height	Tightening Torque	Markers	For Use With	Color	Pkg Qty.	Cat. No.
	0.31 x 2.20 x 1.85 in. (8 x 56 x 47 mm)	4.4 lb•in. (0.5 N•m)	1492-M7X12 1492-M8X5	199-DR1, 199-DR2, 1492-DR4, 1492-DR5, 1492-DR6, 1492-DR7, 1492-DR8, 1492-DR9	Grey	100	1492-EAJ35
	0.48 x 2.20 x 2.48 in. (12.2 x 56 x 63 mm)	4.4 lb•in. (0.5 N•m)	1492-M7X12 1492-M5X5	199-DR1, 199-DR2, 1492-DR4, 1492-DR5, 1492-DR6, 1492-DR7, 1492-DR8, 1492-DR9	Grey	50	1492-EAHJ35
	0.31 x 1.06 x 1.06 in. (8 x 27 x 27 mm)	3.5 lb•in. (0.9 N•m)	1492-M5X5	1492-DR3	Grey	50	1492-EAJ15
	0.24 x 2.19 x 1.63 in. (6 x 55.6 x 41.5 mm)	—	1492-M5X10 1492-M5X5	199-DR1, 199-DR2, 1492-DR4, 1492-DR5, 1492-DR6, 1492-DR7, 1492-DR8, 1492-DR9	Grey	20	1492-ERL35
	0.20 x 0.96 x 0.75 in. (5 x 24.5 x 19 mm)	—	1492-M5X10 1492-M5X5	1492-DR3	Grey	20	1492-ERL15

Partition Plates and Separation Plates

Partition plates allow visual and electrical separation of terminal groups and provide the necessary electrical spacing between adjacent insulated jumpers or between exposed ends of cut jumpers. Separation plates consist of flexible thermoplastic material and are used between terminal blocks to isolate adjacent center jumpers both visually and electrically.

Dimensions Width x Length x Height	For Use With	Color	Pkg Qty.	Cat. No.
Partition Plates:
0.118 x 3.15 x 2.48 in. (3 x 80 x 63 mm)	1492-JD3, JD3C, JD3F, JD3DF, JD3DR, JD3RC…, JD3SS	Grey	20	1492-PPJD3
0.005 x 3.54 x 2.51 in. (0.13 x 90.1 x 63.8 mm)	1492-JD3P…, JDG3P…	Beige	20	1492-PPJD3P
0.08 x 1.57 x 1.20 in. (2 x 40 x 30.5 mm)	1492-WM3, WM4, WMG3, WMG4	Grey	50	1492-PPM3
0.014 x 2.28 x 1.51 in. (0.35 x 58 x 38.3 mm)	1492-WMD1	Grey	50	1492-PPMD1
0.06 x 1.85 x 1.57 in. (1.5 x 47 x 40 mm)	1492-W3, W4, WG4	Grey	50	1492-PP3
0.06 x 2.17 x 1.81 in. (1.5 x 55 x 46 mm)	1492-W6, W10, W16S, W4TW, WG6, WG10S, WG16S	Grey	50	1492-PP10
0.014 x 2.88 x 1.85 in. (0.35 x 73.2 x 47.1 mm)	1492-WTF3…, WTS3…	Beige	50	1492-PPTS3
0.06 x 1.93 x 2.36 in. (1.5 x 49 x 60 mm)	1492-J3, J4, J6, J10, J2Q, J3TW, J3F, JG2Q, JG3, JG3TW, JKD3, JKD3TP, J3P, J3PTP, JTC3	Grey	20	1492-EBJ16
		Blue	20	1492-EBJ16-B
		Yellow	20	1492-EBJ16-Y
Separation Plates:
.014 x 1.76 x 1.57 in. (0.35 x 44.8 x 40.0 mm)	1492-W3, W4	Beige	50	1492-SP3
	All 1492-FPK2 Fuse Plugs	Beige	50	1492-SPJ3

Jumpers

Jumpers use the terminal block wire openings. Multi-pole jumpers can be cut into a smaller number of poles. Many jumpers carry 100% of rated terminal block current. The back of IEC style jumpers are insulated with plastic. An adjacent partition plate provides the necessary electrical spacings between adjacent jumpers or between exposed ends of cut jumpers.

Center Jumpers — Screw Type

These center jumpers are insulated and are available in 2-…50-pole configurations. They mount with screws into the screw type terminal blocks.

Note:The following rules apply when going across different potentials with jumpers cut out.
1. Always de-rate to 400V
2. Always use a partition plate where a cut jumper strip may leave a live end exposed

Center Jumpers — Screwless Type

These center jumpers are insulated and are available in 2-…50-pole configurations. They mount without screws into the both Spring-Clamp terminal blocks and some screw terminal blocks.

Note:When using multiple screwless jumpers in 1492-J3, 1492-J2Q, or 1492-J4 terminal blocks, the following rules apply when going across different potentials with jumpers cut out.
1. When using all 3 channels, or 2 side-by-side channels, de-rate to 125V
2. When using 2 outside channels (leaving the center channel open), de-rate to 400V
3. Always use a partition plate where a cut jumper strip may leave a live end exposed

Center Jumper Covers

Center jumper covers can be used as an extruded marking surface for circuit identification.

Center Jumper Configuration Plates

	For Use With	Color	Pkg Qty.	Cat. No.
Center Jumper Spacer Plate
	1492-L4 to 1492-L3Q, L3 1492-L6 to 1492-L3Q, L3	Grey	25	1492-LJS
Center Jumper Connector Plate
	1492-L4 to 1492-L3T	Grey	25	1492-LJC

Step-Down Distribution Jumpers

	For Use With	Pkg Qty.	Cat. No.
	1492-J35 to 1492-J4 or J6	10	1492-CJJ16SD68
	1492-J16 to 1492-J4 or J6	10	1492-CJJ12SD68
	1492-J35 to 1492-J3	10	1492-CJJ16SD5
	1492-J16 to 1492-J3	10	1492-CJJ12SD5

For Use With	Pkg Qty.	Cat. No.
1492-J3, JD3…, JDG3…, J2Q, J3TW, J3F, JD3F	50	1492-CJJ5-2
	50	1492-CJJ5-3
	50	1492-CJJ5-4
	20	1492-CJJ5-10
1492-J4, J4M	50	1492-CJJ6-2
	50	1492-CJJ6-3
	50	1492-CJJ6-4
	20	1492-CJJ6-10
1492-J6	50	1492-CJJ8-2
	50	1492-CJJ8-3
	50	1492-CJJ8-4
	20	1492-CJJ8-10
1492-J10	50	1492-CJJ10-2
	50	1492-CJJ10-3
	50	1492-CJJ10-4
	20	1492-CJJ10-10
1492-J16	20	1492-CJJ12-2
	20	1492-CJJ12-3
	20	1492-CJJ12-4
	10	1492-CJJ12-10
1492-J35	20	1492-CJJ16-2
	20	1492-CJJ16-3
	20	1492-CJJ16-4
	10	1492-CJJ16-10
1492-J50	10	1492-CJJ18-2
	10	1492-CJJ18-3
	10	1492-CJJ18-4
1492-J70	5	1492-CJJ20-2
	5	1492-CJJ20-3
	5	1492-CJJ20-4
1492-WM3	10	1492-CJM5-2
	10	1492-CJM5-3
	10	1492-CJM5-4
	10	1492-CJM5-5
	10	1492-CJM5-10
1492-W3, WM3, WR3, WTF3…, WTS3…	10	1492-CJL5 (Link)
1492-WR3	5	1492-CJD5-50
	10	1492-CJD5-2
	10	1492-CJD5-3
	10	1492-CJD5-4
	10	1492-CJD5-5
	10	1492-CJD5-10
Note: Notching out one or more jumper poles, with the notched jumpers going across different potentials, will require de-rating to 400V.

For Use With	Pkg Qty.	Cat. No.
1492-WM4	5	1492-CJD6-50
	10	1492-CJD6-2
	10	1492-CJD6-3
	10	1492-CJD6-4
	10	1492-CJD6-5
	10	1492-CJD6-10
1492-WM4, W4TW	10	1492-CJLD6 (Link)
1492-W3	10	1492-CJ5-2
	10	1492-CJ5-3
	10	1492-CJ5-10
	20	1492-CJCW5     (CJ Cover)¬
1492-WTF3…, WTS3…	5	1492-CJT5-50
	10	1492-CJT5-2
	10	1492-CJT5-3
	10	1492-CJT5-4
	10	1492-CJT5-5
	10	1492-CJT5-10
1492-W4, W4TW	5	1492-CJ6-50
	10	1492-CJ6-2
	10	1492-CJ6-3
	10	1492-CJ6-4
	10	1492-CJ6-5
	10	1492-CJ6-10
1492-W4	10	1492-CJL6 (Link)
1492-W4, W6, W10	20	1492-CJCW6   (CJ Cover)
1492-W6	5	1492-CJ7-40
	10	1492-CJ7-2
	10	1492-CJ7-3
	10	1492-CJ7-4
	10	1492-CJ7-5
	10	1492-CJ7-10
1492-W6	10	1492-CJL7 (Link)
1492-W10	5	1492-CJ8-40
	10	1492-CJ8-2
	10	1492-CJ8-3
	10	1492-CJ8-4
	10	1492-CJ8-5
	10	1492-CJ8-10
1492-W10	10	1492-CJL8 (Link)
1492-W16S	10	1492-CJS11-2
	10	1492-CJS11-3
	10	1492-CJS11-4
	10	1492-CJS11-5
	10	1492-CJS11-10
¬ May only be used as a marking surface. May not be installed over center jumper.

Screwless Center Jumpers

For Use With	Color	Pkg Qty.	Cat. No.
1492-L2…, L2T, L2Q, LD2, LD2C	Yellow	60	1492-CJL4-2
		60	1492-CJL4-3
		60	1492-CJL4-4
		60	1492-CJL4-5
		20	1492-CJL4-10
1492-LM3, LC3, LDC3, LDAG3, LDG3P, JKD3…, J3P…, J3, J3TW (see Note)	Yellow	60	1492-CJLJ5-2
	Red	60	1492-CJLJ5-2-R
	Blue	60	1492-CJLJ5-2-B
	Black	60	1492-CJLJ5-2-BL
	Yellow	60	1492-CJLJ5-3
	Red	60	1492-CJLJ5-3-R
	Blue	60	1492-CJLJ5-3-B
	Black	60	1492-CJLJ5-3-BL
	Yellow	60	1492-CJLJ5-4
		20	1492-CJLJ5-5
		20	1492-CJLJ5-6
		20	1492-CJLJ5-7
		20	1492-CJLJ5-8
		20	1492-CJLJ5-9
		20	1492-CJLJ5-10
	Red	20	1492-CJLJ5-10-R
	Blue	20	1492-CJLJ5-10-B
	Black	20	1492-CJLJ5-10-BL
	White	20	1492-CJLJ5-10-W
	Yellow	10	1492-CJLJ5-50
	Red	10	1492-CJLJ5-50-R
	Blue	10	1492-CJLJ5-50-B
	Black	10	1492-CJLJ5-50-BL
	White	10	1492-CJLJ5-50-W

Screwless Center Jumpers, Continued

For Use With	Color	Pkg Qty.	Cat. No.
1492-J4, J4M (see Note)	Yellow	60	1492-CJLJ6-2
	Red	60	1492-CJLJ6-2-R
	Blue	60	1492-CJLJ6-2-B
	Black	60	1492-CJLJ6-2-BL
	Yellow	60	1492-CJLJ6-3
	Red	60	1492-CJLJ6-3-R
	Blue	60	1492-CJLJ6-3-B
	Black	60	1492-CJLJ6-3-BL
	Yellow	60	1492-CJLJ6-4
	Yellow	20	1492-CJLJ6-10
	Red	20	1492-CJLJ6-10-R
	Blue	20	1492-CJLJ6-10-B
	Black	20	1492-CJLJ6-10-BL
	Yellow	10	1492-CJLJ6-41
	Red	10	1492-CJLJ6-41-R
	Blue	10	1492-CJLJ6-41-B
	Black	10	1492-CJLJ6-41-BL
1492-L6, L6T, L16D	Yellow	60	1492-CJL8-2
		60	1492-CJL8-3
		60	1492-CJL8-4
		10	1492-CJL8-32
1492-L10	Yellow	25	1492-CJL10-2
1492-L16	Yellow	25	1492-CJL12-2
1492-L35	Yellow	10	1492-CJL16-2
1492-L3, L3T, L3Q, L3P, LD3, LD3C, LKD3, LTF3, LS2…, L16D	Yellow	60	1492-CJK5-2
		60	1492-CJK5-3
		60	1492-CJK5-4
		20	1492-CJK5-5
		20	1492-CJK5-6
		20	1492-CJK5-7
		20	1492-CJK5-8
		20	1492-CJK5-9
		20	1492-CJK5-10
		10	1492-CJK5-50
1492-L4, L4T, L4Q, LD4DF, LD4DR, LD4SS, LD4, LD4C, L16D	Yellow	60	1492-CJK6-2
		60	1492-CJK6-3
		60	1492-CJK6-4
		20	1492-CJK6-5
		20	1492-CJK6-6
		20	1492-CJK6-7
		20	1492-CJK6-8
		20	1492-CJK6-9
		20	1492-CJK6-10
		20	1492-CJK6-20

Side Jumpers

For Use With	Pkg Qty.	Cat. No.
All 1492-FPK2 Fuse Plugs	50	1492-N42
All 1492-FPK2 Fuse Plugs	10	1492-N49
All 1492-FPK2 Fuse Plugs	10	1492-SJ5-10
—	50	1492-SJ5A-10
—	50	1492-SJ5A-24
—	50	1492-SJ5B-24
—	50	1492-SJ5B-10
All 1492-FPK2 Fuse Plugs	50	1492-N42 (2-Pole)
All 1492-FPK2 Fuse Plugs	10	1492-SJ6-10
—	5	1492-SJ6A-50
All 1492-FPK2 Fuse Plugs	10	1492-SJ8-10
All 1492-FPK2 Fuse Plugs	50	1492-SJ8A-4
All 1492-FPK2 Fuse Plugs	50	1492-SJ8A-3
All 1492-FPK2 Fuse Plugs	50	1492-SJ8A-2
All 1492-FPK2 Fuse Plugs	10	1492-SJMD5-12 (Uninsulated)
All 1492-FPK2 Fuse Plugs	10	1492-N49 (10-Pole Uninsulated)
All 1492-FPK2 Fuse Plugs	10	1492-SJFB8-10
All 1492-FPK2 Fuse Plugs	10	1492-SJS (Side Jumper Insulating Sleeve)

Two-Level Jumper
(Connects Two Levels within a 1492-LTF3 Terminal Block)

Pkg Qty.	Cat. No.
20	1492-CJL5D

Plugs and Other Accessories

The sockets fit into the center bridge screw hole and allow easy connection of test plugs for circuit testing and troubleshooting.

Test Plugs — Spring-Clamp Terminal Blocks

2-…12-pole Quick Connection Euro style plugs.

Operating Instructions — Spring-Clamp Terminal Blocks

Cat. No. 1492-QCLABEL is an adhesive set of visual operating instructions that is intended for installation on the inside of a panel. It illustrates to maintenance personnel the correct operation of Spring-Clamp terminal blocks.

Insulation Stops — Spring-Clamp Terminal Blocks

Protective insulation stops prevent the insulation on conductors from being introduced into clamp and current bar area.

Test Plug Sockets, Test Plugs, Test Plug Adapters, and Test Adapters

Sockets¬
Photo	Pkg Qty.	Cat. No.
	20	1492-TPS23
	50	1492-TPS23L
	50	1492-TPS4L
¬ Required for testing Cat. No. 1492-J products with Cat. 1492-TP23 or 1492-TP40 test plugs.

Test Plugs
Photo	Pkg Qty.	Cat. No.
	20	T	1492-TP23
	20	‡	1492-TP40
	10	1492-TP28
	25	1492-TPCBM
	25	1492-TPCMB
T Used in conjunction with Cat. No. 1492-TPS23 or 1492-TPS23L test sockets.
‡ Used in conjunction with Cat. No. 1492-TPS4L socket.

Test Plug Adapters
Photo	Pkg Qty.	Cat. No.
	10	1492-TA285
	10	1492-TA40
	10	1492-TA40L
	25	1492-TPL5P

Test Plugs (Stackable)
Photo	Markers§	Pkg Qty.	Cat. No.
	1492-M5X10, M5X5	25	1492-TPJ5
	1492-M5X10, M5X5	25	1492-TPJ6
	1492-M3X12, M3X5	25	1492-TPL4
	1492-M5X10, M5X5	25	1492-TPL5
	1492-M5X10, M5X5	25	1492-TPL6
	1492-M5X10, M5X5	25	1492-TPL8
§ Marker cover screws.

Photo	Description	For Use With	Pkg Qty.	Cat. No.
	Jumper Notching ToolT	1492-CJ…	1	1492-T1
	Unused Pin Cover on Connection Blocks	1492-JC3, JDC3	20	1492-PCJC3
	Disconnect Plug	1492-L3P, J3P…, JD3P…, JDG3P…, LD3R…, K2P, K3P	50	1492-DPL
	Plug-In Component Plug	1492-L3P, J3P…, JD3P…, JDG3P…, LD3R…, K2P, K3P	50	1492-CPL
	Fuse Plug — without Blown Fuse Indication	1492-L3P, J3P…, JD3P…, JDG3P…, LD3R…, K2P, K3P	20	§	1492-FPK2
	Fuse Plug — 10…36V Blown Fuse Indication		20	§	1492-FPK224
	Fuse Plug — 35…70V Blown Fuse Indication		20	§	1492-FPK248
	Fuse Plug — 60…150V Blown Fuse Indication		20	§	1492-FPK2120
	Fuse Plug — 140…250V Blown Fuse Indication		20	§	1492-FPK2250
	Mini-Block Jumper Insertion Tool‡	1492-LM	1	1492-TAL5-2
	DIN Rail Adapter Plate for LMP3 Mini-Blocks	1492-LMP3	50	1492-MFLM
	Auxiliary Circuit Tap	1492-J50	5	1492-J50A
		1492-J70	5	1492-J70A
		1492-J120	5	1492-J120A
	Terminal Block screwdriver with hardened 3mm diameter blade (Handle made from recycled material)	All 5…6 mm wide terminal blocks	5	1492-N90
	Wire cutting tool designed to attach directly to the shaft of the Cat. No. 1492-N90 screwdriver	1492-N90	1	1492-KWC
T Used to trim poles from center jumpers and side jumpers. ‡ Used to install Cat. No. 1492-SJLM5-2 in mini blocks. § Use 5 x 20 mm fuses and are rated for AC and DC.

Photo	Description		Used On	Cat. No.	Pcs/Pkg
	Jumper Notching ToolT		1492-CJ…	1492-T1	1
	Unused Pin Cover on Connection Blocks		1492-JC3, JDC3	1492-PCJC3	20
	Busbar For External Connection Blocks		1492-JPO	1492-BBPO-1M	1¬
	Disconnect Plug		1492-L3P, J3P…, JD3P…, JDG3P…, LD3R…, K2P, K3P	1492-DPL	50
	Plug-In Component Plug		1492-L3P, J3P…, JD3P…, JDG3P…, LD3R…, K2P, K3P	1492-CPL	50
	Fuse Plug — without Blown Fuse Indication		1492-L3P, J3P…, JD3P…, JDG3P…, LD3R…, K2P, K3P	1492-FPK2§	20
	Fuse Plug — 10…36V Blown Fuse Indication			1492-FPK224§	20
	Fuse Plug — 35…70V Blown Fuse Indication			1492-FPK248§	20
	Fuse Plug — 60…150V Blown Fuse Indication			1492-FPK2120§	20
	Fuse Plug — 140…250V Blown Fuse Indication			1492-FPK2250§	20
	Mini-Block Jumper Insertion Tool‡		1492-LM	1492-TAL5-2	1
	Din Rail Adapter Plate for LMP3 Mini-Blocks§		1492-LMP3	1492-MFLM	50
	Auxiliary Circuit Tap for J70 Terminal Blocks		1492-J70	1492-J70A	5
	Terminal Block screwdriver with hardened 3mm diameter blade (Handle made from recycled material)		All 5…6 mm wide terminal blocks	1492-N90	5
	Wire cutting tool designed to attach directly to the shaft of the Cat. No. 1492-N90 screwdriver		1492-N90	1492-KWC	1
	Tilting marker adapter for Two-Level IDC blocks		1492-KD2…	1492-MAK2	50
Photo	Description	Color	Used On	Cat. No.	Pcs/Pkg
	Protective Stops #28…#24 AWG (0.13…0.2 mm2)	White	1492-L Products	1492-PSL2-2	100
	Protective Stops #22…#20 AWG (0.25…0.5 mm2)	Gray		1492-PSL2-5	100
	Protective Stops #28…#24 AWG (0.13…0.2 mm2)	White		1492-PSLTF3-2	100
	Protective Stops #22…#20 AWG (0.25…0.5 mm2)	Gray		1492-PSLTF3-5	100
	Protective Stops #30…#24 AWG (0.13…0.2 mm2)	White		1492-PSL3-2	100
	Protective Stops #22…#20 AWG (0.25…0.5 mm2)	Gray		1492-PSL3-5	100
	Protective Stops #18 AWG (0.75…1.0 mm2)	Dark Gray		1492-PSL3-10	100
	Protective Stops #26…#24 AWG (0.13…0.2 mm2)	White		1492-PSL4-2	100
	Protective Stops #22…#30 AWG (0.25…0.5 mm2)	Gray		1492-PSL4-5	100
	Protective Stops #18 AWG (0.75…1.0 mm2)	Dark Gray		1492-PSL4-10	100
	Protective Stops #28…#24 AWG (0.13…0.2 mm2)	White		1492-PSLS2-2	100
	Protective Stops #22…#20 AWG (0.25…0.5 mm2)	Gray		1492-PSLS2-5	100
	Protective Stops #24…#22 AWG (0.25…0.34 mm2)	Gray	1492-K…	1492-PSK2	100
¬ 1 m length T Used to trim poles from center jumpers and side jumpers. ‡ Used to install Cat. No. 1492-SJLM5-2 in mini blocks. § Allows surface mount blocks to be mounted to 15 mm or 35 mm DIN Rail. § Use 5 x 20 mm fuses and are rated for AC and DC.

Plug-In and Sensor Connection Blocks

Plug-In Connection Blocks
Photo	Wire Range	Tightening Torque	For Use With	Pkg Qty.	Cat. No.
	#22…12 AWG (2.5 mm2)	3.5… 4.4 lb•in. (0.4… 0.5 N•m)	1492-JC3, JDC3, LC3, LDC3	100	1492-QP5-2
				100	1492-QP5-3
				100	1492-QP5-4
				50	1492-QP5-5
				50	1492-QP5-6
				50	1492-QP5-7
				50	1492-QP5-8
				50	1492-QP5-9
				50	1492-QP5-10
				50	1492-QP5-11
				50	1492-QP5-12

Sensor Connection Blocks
Photo	Color	Wire Range	For Use With	Pkg Qty.	Cat. No.
	Brown	#26…14 AWG (1.5 mm2)	1492-LS2-3, LS2-3L, LSG2-3, LS2-4, LS2-4L, LSG2-4	100	1492-LS2-BR
	Blue			100	1492-LS2-B
	Green			100	1492-LSG2

Plug-In Connectors for Flexible Configuration Blocks

	Cat. No.	For Use With	Pcs/Pkg
	1492-STP	Individual Plug-in connector - Gray	50
	1492-STP-G	Individual Plug-in connector - Green	50
	1492-SBSTP	Ganged connector - start plug - Gray	50
	1492-GSTP	Ganged connector - middle plug - Gray	50
	1492-EBSTP	Ganged connector - end plug - Gray	50

Accessories for Flexible Configuration Blocks

	Cat. No.	For Use With	Pcs/Pkg
	1492-STPLE	Plug-in block locking element - Yellow	25
	1492-STPCE	Coding Element for keyed configuration - Yellow	50
	1492-STPSR	Strain Relief covering w plug-in blocks - Yellow	25

DIN Rail Receptacle

Convenient 15 A or 20 A power source designed to be installed in panels that will be used in North America and other locations that use the NEMA 5-15 socket (125V, 50/60 Hz).

DIN Rail Receptacle		Standard Duplex		Ground Fault Circuit Interrupter (GFCI)
Photo
Certifications
		UL 508A, NEMA WD-6, NEMA 5-15R
		UL498		UL 498, UL 943
Device Rating	15 A	15 Amp 125V
	20 A	20 Amp 125V
Operating Frequency		50/60 Hz
Dielectric Voltage		Withstands 2000V per UL498		Withstands 1500V per UL498
Operating Temperature Range		–31…+140 °F (–35…+60 °C)
Storage Temperature Range		–13…+176 °F (–25…+80 °C)
Terminal Wire Sizes		#20…#10 AWG solid or stranded
Terminal Torque		7 lb. - in. (.79 Nm)
DIN Rail Receptacle	15 A	Cat. No.	Pkg. Qty.	Cat. No.	Pkg. Qty.
		1492-REC15	1	1492-REC15G	1
	20 A	1492-REC20	1	1492-REC20G	1
Accessories Marking Systems Marker Card:		1492-MS10X17	5 (40/card)	1492-MS10X17	5 (40/card)

X-Y Plotter and Accessories

The flexible marking tool of the Allen-Bradley terminal block product line is the X-Y Plotter.



Advantages

• Plot partial marker cards
  
• Load up to five cards at a time (mix and match)
  
• Easy to use AB-Plot software
  
• Supported by Rockwell Automation and its extensive network of distributors
  
• Can print markers for terminal blocks, contactors, relays, and more
  

System Requirements

• Personal computer with at least an 80486 processor
  
• Microsoft Windows™ 98 or later
  
• Hard drive with at least 50 MB of space available
  
• One open parallel or USB communication port
  

IEC Marking System

Description	Pkg Qty.	Cat. No.
Plotter Kit Includes Series E Plotter, 1492-PLOTPEN25 ink pen, 1492-PLOTPLT plate, communication cables, user manuals, ABPLOT software, and power adaptor.	1	1492-PLTKIT
Plotter Pen Disposable pen, 0.25 mm tip	1	1492-PLOTPEN25
Plotter Pen Disposable pen, 0.35 mm tip	1	1492-PLOTPEN35
ABPLOT Plotter software CD ROM (recommmend downloading latest version from AB.COM)	1	1492-PLOTSOFT
Plotter Ink Cartridge Requires 1492-PLPEN	1	1492-PLINKCART
Refillable pen Requires 1492-PLINKCART	1	1492-PLPEN
Pen Adaptor Adaptor for ultra fine Sharpie pens, includes 1 pen	1	1492-PLOTADPT
Cleaning Solution Used to unclog 1492-PLPEN, requires 1492-PLCLEAN	1	1492-PLSOLN
Cleaning Kit Container and cloth to unclog 1492-PLPEN, requires 1492-PLSOLN	1	1492-PLCLEAN
Service Kit Inserts and cleaning pads to replace in pen station	1	1492-PLOTSERV
Series E Adapter Plate (additional) 1 plate is already included with the Plotter kit	1	1492-PLOTPLT
Adaptor Plate For oversized markers (1492-MW5-21, -MW6-21, and MW7-21)	1	1492-PLOTPLTA
Adhesive Strips For 1492-PLOTPLT Series E	1	1492-PLOTSTRP
Plotter Adapter Plate For older series plotters needing 1492- style markers	1	1492-PLATE2

Blank Markers

Photo	For Use With	Markers per Card	Marker Size	Pkg Qty.	Cat. No.
Snap-In Individual Markers 1492-M	1492-L	100	3 x 5 mm	5	1492-M3X5
	1492-L	120	3 x 12 mm	5	1492-M3X12
	1492-J, L	200	5 x 5 mm	5	1492-M5X5
		144	5 x 8 mm	5	1492-M5X8
		144	5 x 10 mm	5	1492-M5X10
		144	5 x 12 mm	5	1492-M5X12
		96	5 x 15 mm	5	1492-M5X15
		20	5 x 30 mm	5	T	1492-M5X30
	1492-J, L	200	6 x 5 mm	5	1492-M6X5
		120	6 x 10 mm	5	1492-M6X10
	1492-J, L, 1738 ArmorPoint™	120	6 x 12 mm	5	1492-M6X12
	1492-J, L	108	7 x 12 mm	5	1492-M7X12
		160	8 x 5 mm	5	1492-M8X5
	NEMA (1492-HM1, -HM2, -HM3) Terminal Blocks, 1492-CB Circuit Breakers	120	6 x 10 mm	5	1492-MN81
	NEMA (1492-HM3) Terminal Blocks, 1492-CB Circuit Breakers	40	10 x 10 mm	5	1492-MN83
	1492-W,R, 700-HA Relays	56	8 x 9 mm	5	1492-MS8X9
		56	8 x 12 mm	5	1492-MS8X12
	700-HN204, -HN205, Relay Sockets	40	8 x 17 mm	5	1492-MS8X17
	1667 PanelConnect™	40	9 x 20 mm	5	1492-MS9X20
	100-C, -D Contactors, 700-CF Relays, 140 Circuit Breakers, 193-E1, -E3	40	10 x 17 mm	5	1492-MS10X17
Snap-In Linked Markers 1492-MR	1492-J, -L	120	5 x 8 mm	5	1492-MR5X8
		120	6 x 8 mm	5	1492-MR6X8
		120	5 x 12 mm	5	1492-MR5X12
		120	6 x 12 mm	5	1492-MR6X12
		84	8 x 12 mm	5	1492-MR8X12
	1492-WM3, -WMD1	80	5 x 5 mm	5	1492-MS5X5
	1492-W, 700-HA, 800F Contact Block	80	5 x 9 mm	5	1492-MS5X9
	1492-W, 700-H Relays	80	5 x 12 mm	5	1492-MS5X12
	1492-W, -R, 700-H Relays	80	6 x 9 mm	5	1492-MS6X9
	1492-W, 700-H Relays	80	6 x 12 mm	5	1492-MS6X12
Snap-In Hinged Markers	1492-L	96	5 x 10 mm	5	1492-MH5X10
		96	5 x 15 mm	5	1492-MH5X15
		80	6 x 12 mm	5	1492-MH6X12
Cable Markers 1492-MW	External Diameter (mm)
	from 0.276 in. (from 7.0 mm)	32	9 x 24 mm¬	5	1492-MW9X24
	from 0.276 in. (from 7.0 mm)	32	5 x 23 mm¬	5	1492-MW10X23
	from 0.276 in. (from 7.0 mm)	32	8 x 23 mm¬	5	1492-MW14X23
	from 0.276 in. (from 7.0 mm)	12	11 x 44 mm¬	5	1492-MW11X60
	0.162…0.193 in. (41…4.9 mm)	32	5 x 21 mm‡	5	1492-MW5-21
	0.185…0.229 (0.268) in. (4.7…5.8 [6.8] mm)	32	6 x 21 mm‡	5	1492-MW6-21
	0.229…0.276 (0.335) in. (5.8…7.0 [8.5] mm)	32	7 x 21 mm‡	5	1492-MW7-21
¬ Requires cable ties.
T Requires Cat. No. 1492-GMC
‡ Requires Cat. No. 1492-PLOTPLTA

Blank Markers, Continued

Photo	For Use With	Markers per Card	Marker Size	Pkg Qty.	Cat. No.
Self-Adhesive Markers 1492-MAS	Self-adhesive for any equipment	40	9 x 17 mm	5	1492-MAS9X17
	Bul. No. relays, self-adhesive for any equipment	40	6 x 15 mm	5	1492-MAS6X15
	1760-PICO GFX-70 Cont., self-adhesive for any equipment	40	9 x 11 mm	5	1492-MAS9X11
Wire Markers 1492-MWC	0.059…0.098 in. (2.0…3.5 mm)/White	40	4.25 x 21 mm	5	1492-MWC1-21
	0.078…0.138 in. (2.0…5.0 mm)/White	40	4.25 x 21 mm	5	1492-MWC3-21
	0.098…0.197 in. (2.0…5.0 mm)/White	24	6 x 21 mm	5	1492-MWC4-21
	0.059…0.098 in. (1.5…2.5 mm)/White	40	4.25 x 12 mm	5	1492-MWC1-12
	0.059…0.098 in. (1.5…2.5 mm)/Blue	40	4.25 x 12 mm	5	1492-MWC1-12B
	0.059…0.098 in. (1.5…2.5 mm)/Red	40	4.25 x 12 mm	5	1492-MWC1-12R
	0.059…0.098 in. (1.5…2.5 mm)/Yellow	40	4.25 x 12 mm	5	1492-MWC1-12Y
	0.078…0.138 in. (2.0…3.5 mm)/White	40	4.25 x 12 mm	5	1492-MWC3-12
	0.078…0.138 in. (2.0…3.5 mm)/Blue	40	4.25 x 12 mm	5	1492-MWC3-12B
	0.078…0.138 in. (2.0…3.5 mm)Red	40	4.25 x 12 mm	5	1492-MWC3-12R
	0.098…0.197 in. (2.0…5.0 mm)/Yellow	24	6 x 12 mm	5	1492-MWC4-12
	0.098…0.197 in. (2.0…5.0 mm)/Blue	24	6 x 12 mm	5	1492-MWC4-12B
	0.098…0.197 in. (2.0…5.0 mm)/Red	24	6 x 12 mm	5	1492-MWC4-12R
	0.098…0.197 in. (2.0…5.0 mm)/Yellow	24	6 x 12 mm	5	1492-MWC4-12Y
Snap-In Individual Markers for Rockwell Automation products and Competitive Terminal BLocks 1492-MC	Wago	100	4 x 9 mm	5	1492-MCW4X9
	Phoenix, Entrlec, Telemacanique, Legrand	120	5 x 8 mm	5	1492-MC5X8
	Wieland and Telemecanique	100	5 x 12 mm	5	1492-MC5X12
	Wago	100	5 x 9 mm	5	1492-MCW5X9F
	Wago	100	5 x 9 mm	5	1492-MCW5X5
	Wago	100	5 x 5 mm	5	1492-MCW6X9
	Phoenix	100	4 x 5 mm	5	1492-MC4X5
	Bul. No. 1492-FB fuse holder and Phoenix	100	5 x 5 mm	5	1492-MC5X5
	Bul. No. 1492-FB fuse holder and Phoenix	100	6 x 5 mm	5	1492-MC6X5
	Bul. No. 700-HL relays, and Phoenix, Wieland, Entrelec, Telemacanique, Legrand	120	6 x 10 mm	5	1492-MC6X10
	Phoenix and Entrelec	100	8 x 10 mm	5	1492-MC6X10
	Phoenix	100	7 x 5 mm	5	1492-MC7X5
	Phoenix	100	5 x 4 mm	5	1492-MC5X4
	Siemens	64	7 x 10 mm	5	1492-MCS7X10
	Siemens	64	6 x 10 mm	5	1492-MCS6X10
	Siemens	80	5 x 10 mm	5	1492-MCS5X10
	Siemens	64	7 x 7 mm	5	1492-MCS7X7
	Siemens	80	5 x 8 mm	5	1492-MCS5X8
	Siemens	64	6 x 8 mm	5	1492-MCS6X8

1492 Pre-Printed Markers




Catalog Number Explanation

Pre-printed markers are packaged in quantities of 5 with a minimum order quantity of 5 cards.

1492	–	M5x10	H	1-100
		a	b	c

a
Marker Selection
Code
M3x5	MS6X9	MCS6X8
M3x12	MS6X12	MC6X10
M5x5	MS8X9	MCW1-12
M5x8	MS8X12	MCW3-12
M5x10	MS9X20	MCW4-12
M5x12	MS8X17	MAS9X17
M5x15	MS10X17	MAS6X15
M5X30	MC5X8	MAS9X11
M6x5	MC5X10	MW9X24
M6x10	MC5X12	MW10X23
M6x12	MCW4X9	MW14X23
M7x12	MCW5X9	MW11X60
M8x5	MCW5X9F	MW5-21
MR5X8	MCW5X5	MW6-21
MR6X8	MCW6X9	MW7-21
MR5X12	MC4X5	MWC1-21
MR6X12	MC5X5	MWC3-21
MR8x12	MC6X5	MWC4-21
MH5X10	MC8X10	MWC1-12B
MH5X15	MC7X5	MWC1-12R
MH6X12	MC5X4	MCW1-12Y
MMN81	MCS7X10	MWC3-12B
MN83	MCS5X10	MWC3-12R
MS5x5	MCS6X10	MWC3-12Y
MS5x9	MCS7X7	MWC4-12B
MS5X12	MCS5X8	MWC4-12R
		MWC4-12Y

b
Text Direction
Code	Description
H	Horizontal Print
V	Vertical Print
HU	Horizontal Upside-down Print
VU	Vertical Upside-down Print
HR	Horizontal Print, reversed data for each column
VR	Vertical Print, reversed data for each column
HUR	Horizontal Upside-down Print, reversed data for each column
VUR	Vertical Upside-down Print, reversed data for each column
C	Custom

c
Printing Selection
Straight Fill Printing
Option 1-End will start at 1 and continue printing sequential numbers until the end of the card is reached.
1-End	Sequential printing to end of card
L	Continuous printing "L" on card
L1	Continuous printing "L1" on card
L2	Continuous printing "L2" on card
L3	Continuous printing "L3" on card
U	Continuous printing "U" on card
V	Continuous printing "V" on card
W	Continuous printing "W" on card
PE	Continuous printing "PE" on card
GND	Continuous printing "GND" on card
Repeat Sequence Printing
All Options in this section will print the defined sequence in a repeating fashion until all tags are filled. (Example - Option 1-100 with a marker selection of M5x10 will print 1-100 and 1-44.)
1-10 -or- 11-20 -or- 21-30 -or- … -or- 491-500	Block of 10 sequential numbering. Blocks of 10 within a range from 1…500.
1-20 -or- 21-40 -or- 41-60 -or- … -or- 481-500	Block of 20 sequential numbering. Blocks of 20 within a range from 1…500.
1-50 -or- 51-100 -or- 101-150 -or- … -or- 451-500	Block of 50 sequential numbering. Blocks of 50 within a range from 1…500.
1-100 -or- 101-200 -or- … -or- 401-500	Block of 100 sequential numbering. Blocks of 100 within a range from 1…500.
Single Sequence Printing
All options in this section will print the defined sequence 1 time only and will leave the rest of the marker tags blank. (Example - Option 1-100S with a marker selection of M5x10 will print 1-100 and leave 44 blank markers).
1-10S -or- 11-20S -or- 21-30S -or- … -or- 491-500S	Block of 10 sequential numbering. Blocks of 10 within a range from 1…500.
1-20S -or- 21-40S -or- … -or- 481-500S	Block of 20 sequential numbering. Blocks of 20 within a range from 1…500.
1-50S -or- 51-100S -or- … -or- 451-500S	Block of 50 sequential numbering. Blocks of 50 within a range from 1…500.
1-100S -or- 101-200S -or- … -or- 401-500S	Block of 100 sequential numbering. Blocks of 100 within a range from 1…500.

Custom Printed Marker Cards

1.   Download the AB-Print software (AB-Print) from the Allen-Bradley terminal block home page (http://www.ab.com/industrialcontrols/products/) and install it.



2.   Create your custom marker card using the AB-Print software and save your file.

3.   Place the custom order by adding the letter “C” to the end of the marker cat. no. (Example: If the custom marker that was created in Step 2 is Cat. No. 1492-M6X12, an order will be placed with the new Cat. No. 1492-M6X12C.) Then, document the order number for Step 4.

4.   E-mail the custom marker file to
RAMilwCustomMarkers@ra.rockwell.com. Include the following items:
•  Allen Bradley order number (in the subject of the e-mail)
•  Created file (attached to the e-mail)
•  Quantity (the number of needed copies of the file)
•   Company information (with a contact name and number in the e-mail)

‼Note: Minimum quantity is 1 card per order.

Other Accessories/Mailers

6 mm Single Digit Pre-Printed Marker Tabs

Numbers
Printing	Cat. No.	Pcs/Pkg
0	1492-MP-0	10
1	1492-MP-1	10
2	1492-MP-2	10
3	1492-MP-3	10
4	1492-MP-4	10
5	1492-MP-5	10
6	1492-MP-6	10
7	1492-MP-7	10
8	1492-MP-8	10
9	1492-MP-9	10

Number Series
Printing	Cat. No.	Pcs/Pkg
0…9	1492-MP	10

Blank
Printing	Cat. No.	Pcs/Pkg
Blank	1492-MP-BLANK	10

Letters
Printing	Cat. No.	Pcs/Pkg
A	1492-MP-A	10
B	1492-MP-B	10
C	1492-MP-C	10
D	1492-MP-D	10
E	1492-MP-E	10
F	1492-MP-F	10
G	1492-MP-G	10
H	1492-MP-H	10
I	1492-MP-I	10
J	1492-MP-J	10
K	1492-MP-K	10
L	1492-MP-L	10
M	1492-MP-M	10
N	1492-MP-N	10
P	1492-MP-P	10
Q	1492-MP-Q	10
R	1492-MP-R	10
S	1492-MP-S	10

Letters (continued)
Printing	Cat. No.	Pcs/Pkg
T	1492-MP-T	10
U	1492-MP-U	10
V	1492-MP-V	10
W	1492-MP-W	10
X	1492-MP-X	10
Y	1492-MP-Y	10
Z	1492-MP-Z	10

Special Symbols
Printing	Cat. No.	Pcs/Pkg
+	1492-MP-POS	10
	1492-MP-GND	10
–	1492-MP-NEG	10
~	1492-MP-AC	10
=	1492-MP-DC	10

Bulletin 1492 Pre-Printed Mini-Markers for 1492-J, -L Terminal Blocks

	Description	Pkg Qty.	Cat. No.
	End anchor top marker carrier	50	1492-GMC

Cat. No.	Description	Pkg. Quantity
1492-MBAS5-4	Marker base for up to 4 markers	100
1492-MBAS5-5	Marker base for up to 5 markers	100
1492-MBAS5-6	Marker base for up to 6 markers	100

Cat. No.	Printing	Pkg. Quantity
1492-MM5-0	0	10
1492-MM5-1	1	10
1492-MM5-2	2	10
1492-MM5-3	3	10
1492-MM5-4	4	10
1492-MM5-5	5	10
1492-MM5-5	5	10
1492-MM5-6	6	10
1492-MM5-7	7	10
1492-MM5-8	8	10
1492-MM5-9	9	10
1492-MM5-0-9	0 through 9	10
1492-MM5-BLANK		10
1492-MM5-A	A	10
1492-MM5-B	B	10
1492-MM5-C	C	10
1492-MM5-D	D	10
1492-MM5-E	E	10
1492-MM5-F	F	10
1492-MM5-G	G	10
1492-MM5-H	H	10
1492-MM5-I	I	10
1492-MM5-J	J	10
1492-MM5-K	K	10
1492-MM5-L	L	10
1492-MM5-M	M	10
1492-MM5-N	N	10
1492-MM5-O	O	10
1492-MM5-P	P	10
1492-MM5-Q	Q	10
1492-MM5-R	R	10
1492-MM5-S	S	10
1492-MM5-T	T	10
1492-MM5-U	U	10
1492-MM5-V	V	10
1492-MM5-W	W	10
1492-MM5-X	X	10
1492-MM5-Y	Y	10
1492-MM5-Z	Z	10
1492-MM5-GND		10
1492-MM5-POS	+	10
1492-MM5-NEG	-	10
1492-MM5-AC	~	10
1492-MM5-DC	=	10

Electrical Warning Plate Markers

Photo	For Use With	Color	Pkg Qty.	Cat. No.
	1492-J	Yellow	25	1492-EWPJ5
	1492-J	Yellow	50	1492-EWPJ8
	1492-J	Yellow	50	1492-EWPJ12
	1492-J	Yellow	50	1492-EWPJ18
	1492-L	Yellow	20	1492-EWPL5
	1492-L	Yellow	20	1492-EWPL6
	1492-L	Yellow	20	1492-EWPL8
	1492-L	Yellow	20	1492-EWPL10
	1492-L	Yellow	20	1492-EWPL12
	1492-L	Yellow	20	1492-EWPL16
	1492-L	Yellow	20	1492-EWPL4
	1492-W	Yellow	10	1492-EWP5
	1492-W	Yellow	10	1492-EWP5-4
	1492-W	Yellow	10	1492-EWP6
	1492-W	Yellow	10	1492-EWP6-4
	1492-W	Yellow	10	1492-EWP7
	1492-W	Yellow	10	1492-EWP7-4
	1492-W	Yellow	10	1492-EWP8
	1492-W	Yellow	10	1492-EWP8-4
	1492-W	Yellow	10	1492-EWP11
	1492-W	Yellow	10	1492-EWP11-4

Agency Approvals

In general, accessories for terminal blocks are not eligible for recognition by UL, CSA, or other third party approval aggencies. The suitability of the installation must be judged in the end use application due to the wide variety of possible uses. However, accessories are designed to meet, and are tested to, the terminal block assembly requirements such as electrical spacings, etc.

Specifications

Maximum number of multiple wire connections for copper conductors of the same cross-section and type for Allen-Bradley IEC Terminal Blocks.
Cat. Nos. 1492-J and L products are all recommended for one conductor per terminal. Wire range is defined in the cat. page for each of the products.

Cat. No.	Wire Size [AWG]
	#30	#28	#26	#24	#22	#20	#18	#16	#14	#12	#10	#8	#6	#4	#2	#1	1/0	2/0	3/0
	Number of the Same Size Wires Per Terminal
1492-H4	—	—	—	—	4	4	3	2	2	1	—	—	—	—	—	—	—	—	—
1492-H5	—	—	—	—	4	4	3	2	2	1	—	—	—	—	—	—	—	—	—
1492-H6	—	—	—	—	4	4	3	2	2	1	—	—	—	—	—	—	—	—	—
1492-H7	—	—	—	—	4	4	3	2	2	1	—	—	—	—	—	—	—	—	—
1492-J2Q	—	—	4	4	4	3	1	1	1	—	—	—	—	—	—	—	—	—	—
1492-J3	4	4	4	4	4	4	3	3	2	1	—	—	—	—	—	—	—	—	—
1492-J3F	4	4	4	4	4	4	3	3	2	1	—	—	—	—	—	—	—	—	—
1492-J3TW (Single Side)	4	4	4	4	4	4	3	3	2	1	—	—	—	—	—	—	—	—	—
1492-J3TW (Twin Side)	—	—	4	4	4	3	1	1	1	—	—	—	—	—	—	—	—	—	—
1492-J4	—	—	—	—	4	4 (29 A)	3	3	2	1	1	—	—	—	—	—	—	—	—
1492-J4M	—	—	—	—	4	4 (29 A)	3	3	2	1	1	—	—	—	—	—	—	—	—
1492-J6	—	—	—	—	4	4 (30 A)	3	3	3	2	1	1	—	—	—	—	—	—	—
1492-J10	—	—	—	—	4	4	4	4 (46 A)	3 (50 A)	2 (50 A)	1	1	1	—	—	—	—	—	—
1492-J16	—	—	—	—	—	—	—	4 (67 A)	4 (62 A)	3 (71 A)	2 (67 A)	1	1	1	—	—	—	—	—
1492-J35	—	—	—	—	—	—	—	—	3	3	3 (90 A)	2	2 (114 A)	1	1	1	1	—	—
1492-J50	—	—	—	—	—	—	—	—	—	—	—	2	2	1	1	1	1	—	—
1492-J70¬	—	—	—	—	—	—	—	—	5	5	5	2	2	2	1	1	1	1	—
1492-JC3	—	—	4	4	4	3	1	1	1	—	—	—	—	—	—	—	—	—	—
1492-JD3...	4	4	4	4	4	4	3	2	2	1	—	—	—	—	—	—	—	—	—
1492-JD3F	4	4	4	4	4	4	3	2	2	1	—	—	—	—	—	—	—	—	—
1492-JD3P	—	—	—	—	4	4	3	2	1	1	—	—	—	—	—	—	—	—	—
1492-JDC3	4	4	4	4	4	4	3	2	2	1	—	—	—	—	—	—	—	—	—
1492-JDG3	4	4	4	4	4	4	3	2	2	1	—	—	—	—	—	—	—	—	—
1492-JDG3P	—	—	—	—	4	4	3	2	1	1	—	—	—	—	—	—	—	—	—
1492-JG2Q	—	—	4	4	4	3	1	1	1	—	—	—	—	—	—	—	—	—	—
1492-JG3	4	4	4	4	4	4	3	3	2	1	—	—	—	—	—	—	—	—	—

Cat. No.	Wire Size [AWG]
	#30	#28	#26	#24	#22	#20	#18	#16	#14	#12	#10	#8	#6	#4	#2	#1	1/0	2/0	3/0
	Number of the Same Size Wires Per Terminal
1492-JG3TW (Single Side)	4	4	4	4	4	4	3	3	2	1	—	—	—	—	—	—	—	—	—
1492-JG3TW (Twin Side)	—	—	4	4	4	3	1	1	1	—	—	—	—	—	—	—	—	—	—
1492-JG4	—	—	—	—	4	4	3	3	2	1	1	—	—	—	—	—	—	—	—
1492-JG6	—	—	—	—	4	4	3	3	3	2	1	1	—	—	—	—	—	—	—
1492-JG10	—	—	—	—	4	4	4	4	3	2	1	1	1	—	—	—	—	—	—
1492-JG16	—	—	—	—	—	—	—	4	4	3	2	1	1	1	—	—	—	—	—
1492-JG35	—	—	—	—	—	—	—	—	3	3	3	2	2	1	1	1	1	—	—
1492-JG50	—	—	—	—	—	—	—	—	—	—	—	2	2	1	1	1	1	—	—
1492-JG70¬	—	—	—	—	—	—	—	—	5	5	5	2	2	2	1	1	1	1	—
1492-JKD3	4	4	4	4	3	3	3	3	2	1	—	—	—	—	—	—	—	—	—
1492-W3	4	4	4	4	4	4	3	2	1	—	—	—	—	—	—	—	—	—	—
1492-W4	—	—	—	—	4	4	3	2	2	1	1	—	—	—	—	—	—	—	—
1492-W4TW	—	—	—	—	4	4	3	2	2	1	—	—	—	—	—	—	—	—	—
1492-W6	—	—	—	—	4	4	3	2	2	2	1	—	—	—	—	—	—	—	—
1492-W10	—	—	—	—	4	4	4	4	3	2	1	1	—	—	—	—	—	—	—
1492-W16S	—	—	—	—	—	—	—	—	4	3	2	2	1	1	—	—	—	—	—
1492-WFB4...	—	—	—	—	4	4	3	2	2	1	—	—	—	—	—	—	—	—	—
1492-WG4	—	—	—	—	4	4	3	2	1	1	—	—	—	—	—	—	—	—	—
1492-WG6	—	—	—	—	4	4	3	2	2	1	1	—	—	—	—	—	—	—	—
1492-WG10S¬	—	—	—	—	4	4	4	4	3	2	1	1	—	—	—	—	—	—	—
1492-WG16S¬	—	—	—	—	—	—	—	—	4	3	2	2	1	1	—	—	—	—	—
1492-WM3	4	4	4	4	4	3	2	1	1	—	—	—	—	—	—	—	—	—	—
1492-WM4	—	—	—	—	4	4	3	2	2	1	—	—	—	—	—	—	—	—	—
1492-WMD1	—	—	—	—	2	1	1	1	—	—	—	—	—	—	—	—	—	—	—
1492-WMG3	—	—	—	—	—	—	—	—	1	—	—	—	—	—	—	—	—	—	—
1492-WMG4¬	—	—	—	—	4	4	3	2	2	1	—	—	—	—	—	—	—	—	—
1492-WR3	—	—	—	—	4	4	3	2	1	—	—	—	—	—	—	—	—	—	—
1492-WTF3...	—	—	4	4	4	4	3	2	1	—	—	—	—	—	—	—	—	—	—
1492-WTS3...	—	—	4	4	4	4	3	2	1	—	—	—	—	—	—	—	—	—	—
1492-QP5...	4	4	4	4	4	4	2	1	1	—	—	—	—	—	—	—	—	—	—
¬ UL multiple wire testing not complete at time of printing. Consult your local Rockwell Automation sales office or Allen-Bradley distribution for specification updates.

§ Performance Data — See this catalog, page Important-Performance Data.
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of accelerated testing at elevated stress levels and the user should correlate it to actual application requirements. Actual performance is subject to Allen-Bradley WARRANTY and LIMIT OF LIABILITY.

IEC Terminal Block Specifications§ 

Tie Point Terminal Blocks — Type JD3C, LD2C, LD3C, and LD4C

	The total current flow through these terminal blocks (the sum of all inputs or the sum of all outputs) must not exceed the rated current for the device.

Description		Type	Rating
Maximum total current flow through the terminal block		LD2C	10 A
		JD3C, LD3C	20 A
		LD4C	25 A
Maximum working voltage		LD2C	300V
		JD3C, LD3C, LD4C	600V
Ambient temperature range	Operating	All	-4…+104 °F (-20…+40 °C)
	Storage	All	-40…+167 °F (-40…+75 °C)

Diode Terminal Blocks — Type JD3DR, JD3DF, LD4DF, and LD4DR§ 

Description		Symbol	Type	Rating
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage		V (RRM) V (RWM) V (R)	JD3DF, JD3DR, LD4DF, LD4DR	600V
Non-Repetitive Peak Reverse Voltage (Halfwave, single phase, 60 Hz)		V (RSM)	JD3DF, JD3DR, LD4DF, LD4DR	600V
RMS Reverse Voltage T		V (Rrms)	JD3DF, JD3DR, LD4DF, LD4DR	600V
Average Rectified Forward Current Single Phase, Resistive Load, 60 Hz		I (O)	All	1.0 A
Non-Repetitive Peak Surge Current (Surge applied at rated load)		I (FSM)	All	30 A (1 cycle)
Maximum Forward Voltage Drop [I (F) = 1.0 A]		V (F)	All	1.1V
Maximum Reverse Current		I (R)	All	10 mA
Ambient temperature range	Operating	T (A)	All	-4…+104 °F (-20…+40 °C)
	Storage	T (S)	All	-40…+167 °F (-40…+75 °C)

All parameters measured at 77 °F (25 °C).

§ Performance Data — See this catalog, page Important-Performance Data. Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of accelerated testing at elevated stress levels and the user should correlate it to actual application requirements. Actual performance is subject to Allen-Bradley WARRANTY and LIMIT OF LIABILITY.

T The maximum voltage rating of the diode terminal blocks listed in the above table should not be exceeded even though the maximum reverse voltage rating of the diode alone is 1000V.

Surge Suppressor Performance Characteristics and Electrical Component Data§ 

Surge Suppressor Terminal Blocks
Performance Characteristic	Cat. No.
	JD3SS, JD3PSS, JD3SSTP, JDG3PSS, JDG3PSSTP, LD4SS
Nominal Working Voltage (Volts AC or DC)	120
Maximum AC Working Voltage RMS Continuous (60 Hz)	140
Maximum DC Working Voltage Continuous	180
Maximum Clamping Voltage at Current lp (8/20 ms Pulse)	360V Ip = 10 A
Maximum Voltage Rate of Rise     Bulletin 100 Contactors Types A38…B180     Bulletin 500 Contactors & Starters, Size 0…5     Bulletin 700 Relays	—
Peak Current (8/20 ms Pulse)	1200 A
Typical Leakage Current at Nominal AC Working Voltage	< 0.1 mA
Metal Oxide Varistor (MOV)     Maximum Clamping Voltage at Current lp (8/20 ms Pulse)     Maximum Transient Energy     Maximum Power Dissipation	10 J 0.25 W

Technical Specifications for Fuse Plugs§ 

Characteristic	1492-FPK2	1492-FPK224	1492-FPK248	1492-FPK2120	1492-FPK2250
Indicator Type	Non-Indicating	LED	LED	LED	LED
Leakage Current	—	1.6 mA @ 24V	1.6 mA @ 24V	1.6 mA @ 24V	1.6 mA @ 264V
Working Voltage	Per Fuse Rating	10…36V AC/DC	35…70V AC/DC	60…150V AC/DC	140…250V AC
Fuse Size	5 x 20 mm
Marker	1492-M5X5
¬ Performance Data — See this catalog, page Important-2. Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of accelerated testing at elevated stress levels and the user should correlate it to actual application requirements. Actual performance is subject to Allen-Bradley WARRANTY and LIMIT OF LIABILITY.
§ IEC standards for 5 x 20 mm fuses do not include ratings above 6.3 A.

UL/CSA File and Guide Numbers Arranged by Base Cat. Nos.

Base Cat. No.	UL Number‡		CSA Number
	File	Guide	File	Class
1492-H4, -H5, -H6, -H7	E40735	XCFR2	LR67896	622801
1492-R	E40735 E187022	XCFR2 XCIB2 XCFR8	—	—
1492-RG	E160646 E40735 E187022	KDER2 XCFR2 XCIB2	—	—
1492-UF3	E40735	XCFR2	LR67896	622801
1492-W	E40735 E187022	XCFR2 XCIB2	LR67896 LR14074	622801 622801
1492-WG	E40735 E187022	XCFR2 XCIB2	LR67896 LR14074	622801 622801
1492-J	E40735	XCFR2 XCIB2	223923	622801 622801
1492-JG	E40735 E187022	XCFR2 XCIB2	223923	622801 622801
1492-L	E40735 E187022	XCFR2 XCIB2	223923	622801 622801
1492-LG	E40735 E187022	XCFR2 XCIB2	223923	622801 622801
‡ These numbers are actually UL file and guide numbers, as these products are UL Recognized Components per Canadian Safety Standards (cUR).

Spring-Clamp Operating Instructions

Cat. No. 1492-QCLABEL (Adhesive Label — Actual Size)

¬ Performance Data — See Performance Data.
T IEC standards for 5 x 20 mm fuses do not include ratings above 6.3 A.