Terminal Blocks, NEMA/EEMAC

Catalogs > Industrial Controls Catalog > Terminal Blocks and Wiring Systems > Terminal Blocks, NEMA/EEMAC > NEMA/EEMAC Terminal Blocks

NEMA/EEMAC Terminal Blocks

Isolation Switch Blocks

	1492-CE9		1492-H7
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications	Knife disconnect isolating terminal block with screw terminal and wire clamp.		High-density isolating terminal block with finger-safe terminals.
Approvals
Voltage Rating	600V AC/DC		300V AC/DC
Maximum Current	10 A		15 A
Wire Range (Rated Cross Section)	#22…#10 AWG (0.5…6 mm2)		#30…#12 AWG (0.05…4 mm2)
Wire Strip Length	0.38 in. (9.7 mm)		0.38 in. (9.7 mm)
Recommended Tightening Torque	10…16 lb-in. (1.1…1.8 N•m)		3…7 lb-in. (0.3…0.8 N•m)
Fuse Size (Not Supplied)	—		1/4 in. x 1-1/4 in. Dummy Fuse (Supplied)
Density	16 pcs./ft (52/m)		33 pcs./ft (108/m)
Insulation Temperature Range	–40…+221°F (–40…+105°C)		–40…+221°F (–40…+105°C)
Terminal Blocks	Cat. No.	Pcs./ Pkg.	Cat. No.	Pcs./ Pkg.
Terminal Block	1492-CE9	10	1492-H7	25
Accessories (Accessories)	Cat. No.	Pcs./ Pkg.	Cat. No.	Pcs./ Pkg.
Mounting Rails:
A-B Rail	1492-N1	20	1492-N1	20
3 ft Rigid A-B Rail	1492-N22	20	1492-N22	20
3 ft High-Rise A-B Rail	1492-N44	2	1492-N44	2
Standoff Brackets (use every 12 in.)	1492-N25	2	1492-N25	2
1 m Symmetrical DIN	—	—	199-DR1	10
1 m Symmetrical DIN (Aluminum)	—	—	1492-DR5	10
1 m Hi-Rise Sym. DIN (Aluminum)	—	—	1492-DR6	2
1 m Angled Hi-Rise Sym. DIN (Steel)	—	—	1492-DR7	2
End Barrier	1492-N17	50	1492-N37	50
End Anchors:
A-B Rail	1492-N23	10	1492-N23	10
A-B Rail — Normal Duty	1492-N47	50	1492-N47	50
DIN Rail — Normal Duty	—	—	1492-EA35	50
DIN Rail — Heavy Duty	—	—	1492-EAH35	10
Side Jumpers:
Side Jumper — 10-pole Uninsulated	—	—	1492-N49	10
	—	—	—	—
Fanning Strip (12-pole can cut to desired length)	—	—	1492-SJS	10
Marking Systems	—	—	1492-MS8X12 (56/sheet)	5