Terminal Blocks and Wiring Systems

Catalogs > Industrial Controls Catalog > Terminal Blocks and Wiring Systems > Wiring Systems

Wiring Systems

Introduction Standards Compliance and Certifications Selecting a Wiring System Catalog Number Explanation 1746 Digital I/O Module Selection 1746 Analog I/O Module Selection 1756 Digital I/O Module Selection
1756 Analog I/O Module Selection MicroLogix 1200 Embedded 40 I/O Controllers to IFM and Cable Selection Tables MicroLogix 1500 Base Unit I/O to IFM and Cable Selection Tables 1769 Digital I/O Module Selection 1769 Analog I/O Module Selection 1794 Digital Flex I/O Module Selection 1794 Analog Flex I/O Module Selection
1771 Digital I/O Module Selection 1771 Analog I/O Module Selection PowerFlex 700H and 700S Drive IFM and Cable Selection Table IFM-Ready I/O Cable Selection Build-to-Order Length Cable Selection Specifications
IFM-Ready I/O Cable Selection

IFM-Ready I/O Cables

IFM-ready cables have a cable connector on one end to attach to the IFM and either 20 or 40 individually colored conductors on the other end (CABLE¬ P and CABLE¬ Q, respectively). These cables allow the IFM to be used in specialty applications that require a custom connection.

Cable Cat. No. Standard Cable
Lengths
Insulation
Rating
No. Conductors Conductor
Size
Nominal Outer
Diameter
Current/
Conductor
Compatible IFM
Cat. Nos.
1492-CABLET P 1.0, 2.5, 5.0 m 300V, 80°C 20 22 AWG 9 mm (0.36 in.) 2 A 1492-IFM20…,
1492-XIM20…
1492-CABLET Q 1.0, 2.5, 5.0 m 300V, 80°C 40 22 AWG 11.7 mm (0.46 in.) 2 A 1492-IFM40…,
1492-XIM40…
  
T IFM-ready cables are available in lengths of 1.0, 2.5, and 5.0 m. To order, insert the desired cable length into the cat. no. (010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-CABLE025P is for a 2.5 m, 20 conductor IFM-ready cable. Also refer to Build-to-Order Length Cables below.