Catalogs > Industrial Controls Catalog > Connection Systems > Panel Connection Systems
Panel Connection Systems
| Description | PanelConnect System View | PanelConnect Input Features | Product Selection — Input Modules | PanelConnect™ Specifications | Modules for 16-Point Inputs | Pre-Wired Cables for Input PanelConnect |
|
|
Features:
Application Notes
Distribution Block Connection
Match I/O Program to Distribution Block outputs in the sequence shown below
1667-160Axxxx
|
1667-160Dxxxx
|
1. Compatiblity- To ensure proper operation with the I/O module, do not exceed the voltage and current ratings of the PanelConnect Module.
2. Wiring- Refer to the label section Pneumatic Valve Wiring Reference Guide.
3. Dimensions- Refer to 16-Point PanelConnect Input or Output Module Dimensions.
|
|
Modules for 16 Outputs (M23)
|
Features:
Specifications
Application Notes
Distribution Block Connection
Match I/O Program to Distribution Block outputs in the sequence shown below:
|
1. Compatiblity- To ensure proper operation with the I/O module, do not exceed the voltage and current ratings of the PanelConnect Module.
2. Wiring- Refer to the label section Pneumatic Valve Wiring Reference Guide.
3. Dimensions- Refer to 16-Point PanelConnect Input or Output Module Dimensions.
|
|
1667-32OD1201 (32-Point Output)
|
1667-32OD1201 Specifications
| Main PanelConnect Connector | Number of pins | 12 |
| Style | Mini-Plus 1-1/8 in. | |
| Number of points | 32 | |
| Degree of Protection | IP65 Type 1, 4, 4X, 12 |
| Voltage Rating | 10…30V DC |
| Maximum Peak Voltage¬ | 600Vp |
| Maximum Current (per Circuit) | 2 A |
| Maximum Current (per Module) | 12 A |
| Indicator Circuit Current (Nominal) | 2 mA |
| No. of Terminals per Device Common | 2 |
| Operating Temperature Range | 0…+60×C Non-Condensing |
| Certifications | |
| ¬ Transient voltage greater than 600Vp use a UL Recognized suppression device rated at 2.5 kV withstand. | |
|
|
Power Supply Connector Specification | |
| Wire Range (Rated Cross Section) | #22…#12 AWG (0.2…4 mm2) | |
| Wire Strip Length | 0.32 in. (8 mm) | |
| Recommended Tightening Torque | 4.5…5.5 lb.-in. (0.50…0.60 Nm) | |
Distribution Block Connection
Match I/O Program to Distribution Block outputs in the sequence shown below:
Pinout
|
|
Application Notes
1. Compatibility — To ensure proper operation with the I/O module, do not exceed the voltage and current ratings of the PanelConnect Module.
2. Wiring — Refer to the label section on [BAD REF 202766 ].
3. Dimensions — Refer to 16-Point PanelConnect Input or Output Module Dimensions.
|
Note:For configuring to double solenoid valves, refer to Table 6. Distribution Boxes for Distribution Box connections.
Table X. PLC-Specific Current Ratings
| Cat. No. | Current/Circuit | Current/Module | Indicator Circuit Current | Operating Temperature Range |
| 1762-40AWA (Outputs) ¬ | 0.25 A | 4.0 A | 2 mA | 0°…60°C |
| 1762-40BWA (Outputs) ¬ | ||||
| 1762-40BXB (Outputs) ¬ | ||||
| 1764-24AWA (Outputs) ¬ | 0.5 A (Outputs 0…4) 0.25 A (Outputs 4…11) |
|||
| 1764-24BWA (Outputs) ¬ | ||||
| 1764-28BXB (Outputs) ¬ | 2.0 A (Outputs 0…1) 0.6 A (Outputs 2…7) 1.0 A (Outputs 8…11) |
|||
| ¬ Refer to Bulletin 1762 and 1764 literature for output voltage ratings. | ||||
