Catalogs > Industrial Controls Catalog > Control Circuit and Load Protection > Fuse Holders > Bulletin 1492-FB Fuse Holders
Bulletin 1492-FB Fuse Holders
| Introduction |  |
Standards Compliance | |
Specifications | |
Product Selection | |
Accessories | |
Approximate Dimensions | |
| Description | Pkg. Quantity | Cat. No. |
| Fuseholder Identification Slide-in Markers‡ The following are blank cards. Squares slip into molded slot. |
5 | 1492-MC5X5 |
| 1492-MC6X5 | ||
| ‡ Refer to terminal block marking systems on page Marking Solutions. | ||
Bulletin 1492 Cuttable Bus Bar (cULus and CE)
- Cuttable, copper bus bar
- May be cut to to length, provided in 1 meter lengths
- For use with Bulletin 1492-SP and 1492-FB circuit breakers
- 80 A and 100 A versions
- 100 kA SCCR when used with 1492-FB and indicated primary fuse
- Multiphase options— single, two and three phase
- Accessories: end caps, protective shroud and terminal lug
- Standards Compliance: UL 508, UL E56639 - Category NMTR and NMTR7
- Certifications: cULus Listed, CE Marked
| Description | Devices per Meter | Bus Protection Max Fuse, Type J |
Amperage | Pkg. Qty. | Cat. No. |
| Single Phase Bus Bar | 57 | 175 A | 80 | 1 - 1 M Length | 1492-A1B8 |
| 200 A | 100 | 1492-A1B1 | |||
| Two Phase Bus Bar | 29 |
175 A | 80 | 1492-A2B8 | |
| 200 A | 100 | 1492-A2B1 | |||
| Three Phase Bus Bar | 19 | 175 A | 80 | 1492-A3B8 | |
| 200 A | 100 | 1492-A3B1 | |||
| Accessories | |||||
| End Caps for use with Single Phase Bus Bar | - | — | — | 10 | 1492-A1E |
| End Caps for use with Two and Three Phase Bus Bar | - | — | — | 10 | 1492-AME |
| Protective Shroud | - | — | — | 10 | 1492-AAP |
| Terminal Lug | - | 80/100 | 80/100 | 10 | 1492-AAT1 |
|
