Catalogs > Industrial Controls Catalog > Lighting Control > Feeder Disconnect Lighting Contactors > Bulletin 500L Top Wiring Contactors For Non-Motor and Lighting Loads
Bulletin 500L Top Wiring Contactors For Non-Motor and Lighting Loads
| Introduction | Standards Compliance and Certifications | Catalog Number Explanation | Product Selection | Modifications for Non-Combination Devices |
| Accessories | Specifications | Full Load Motor Currents | Approximate Dimensions | Renewal Parts |
Your order must include 1) Cat. No. of contactor selected, 2) modifications, if any, and 3) for motor loads, use Bulletin 500 contactors listed on Product Selection of NEMA sizes 00…9 as Factory Assembled.
Product Selection
| Build a Catalog Number |
Top Wiring for Non-Motor and Lighting Loads
Does not include line and load lugs, see for kits.
∆ Only available on sizes 00…5. When using 24V coils on size 4 or 5, an interposing relay may be required. See coil VA values on AC Coil Data.
♣ This coil is optimized for 110…115V, 50 Hz applications, but can be used at 120V, 60 Hz nominal.
◆ This coil is optimized for 115…120V, 60 Hz applications, but can be used at 110V, 50 Hz nominal.
♠ This coil is optimized for 220…230V, 50 Hz applications, but can be used at 240V, 60 Hz nominal.
∇ This coil is optimized for 230…240V, 60 Hz applications, but can be used at 220V, 50 Hz nominal.
| Maximum Continuous Ampere Ratings [A] |
Open Type Without Enclosure |
Type 1 General Purpose Enclosure |
Type 4/4X Watertight, Corrosion- Resistant Enclosure Stainless Steel |
Type 3R/4/12 Rainproof, Dusttight Industrial Use Enclosure |
|
Ä Coil Voltage Code
The cat. no. as listed is incomplete. Select a coil voltage code from the table below to complete the cat. no.
Example: Cat. No. 500L-AOÄ94 becomes Cat. No. 500L-AOD94. For other voltages, consult your local Rockwell Automation sales office or Allen‑Bradley distributor.
| [V] | 24∆ | 110- 115 |
115- 120 |
200- 208 |
220- 230 |
230- 240 |
240 | 277 | 380 | 380- 400 |
415 | 440- 460 |
460- 480 |
500 | 550 | 575- 600 |
|
| AC, 50 Hz | K | S♣ | — | — | P♠ | — | T | — | N | KN | I | Q | — | M | R | — | |
| AC, 60 Hz | J | — | D◆ | H | — | A∇ | — | F | — | — | U | — | B | — | — | C | |
Special Purpose Bolted Enclosures — Hazardous Location
| Contactor | Type 7 & 9; Class I, Groups C & D; Class II, Groups E, F & G Divisions 1 & 2 Enclosure Code (E) |
Type 3R, 7 & 9; Class I, Groups C & D; Class II, Groups E, F & G Divisions 1 & 2 Enclosure Code (H) |
|
| Size | Poles | ||
| 0 | 3 | Available | Available |
| 1 | |||
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
★ Fiberglass-reinforced polyester hubs are included with each starter.
Does not include line and load lugs, see for kits.
§ Feed-through wiring only.
∆ Only available on sizes 00…5. When using 24V coils on size 4 or 5, an interposing relay may be required. See coil VA values on AC Coil Data.
♣ This coil is optimized for 110…115V, 50 Hz applications, but can be used at 120V, 60 Hz nominal.
◆ This coil is optimized for 115…120V, 60 Hz applications, but can be used at 110V, 50 Hz nominal.
♠ This coil is optimized for 220…230V, 50 Hz applications, but can be used at 240V, 60 Hz nominal.
∇ This coil is optimized for 230…240V, 60 Hz applications, but can be used at 220V, 50 Hz nominal.
