Feeder Disconnect Lighting Contactors

Catalogs > Industrial Controls Catalog > Lighting Control > Feeder Disconnect Lighting Contactors > Bulletin 500L Top Wiring Contactors For Non-Motor and Lighting Loads

Bulletin 500L Top Wiring Contactors For Non-Motor and Lighting Loads

Accessories

Contactor Accessories

For use on Bulletins 500, 500F, 500L, 500FL, 500LP, 502, 502L, 503, 503L, 505, 505V, 506, 506X, 507, 507X, 509, 512, 512H, 512M, 512V, 513, 513H, 513M, 513V, 520, 520V, 522, 523, 530, 532, 533, 540, 542, 543, 570, 572, 573, 1242, 1243, 1272, 1273, 1282, 1283, 1232X, 1232V, 1233X, and 1233V

Description		NEMA Size	Cat. No.
	Coils (60 Hz)             115…120V	0…1	CB-236
	200…208V		CB-249
	230…240V		CB-254
	460…480V		CB-273
	575…600V		CB-278
	115…120V	2	CC-236
	200…208V		CC-249
	230…240V		CC-254
	460…480V		CC-273
	575…600V		CC-278
	115…120V	3	CD-236
	200…208V		CD-249
	230…240V		CD-254
	460…480V		CD-273
	575…600V		CD-278
	115…120V	4	CE-236
	200…208V		CE-249
	230…240V		CE-254
	460…480V		CE-273
	575…600V		CE-278
	115…120V	5 (SER. L)	AF-236
	200…208V		AF-249
	230…240V		AF-254
Note: For complete listing of coils available, see Bulletin 500 Line of Contactors and Starters	460…480V		AF-273
	575…600V	5	AF-278
Surge Suppressor — Made to be easily mounted directly across the coil terminals of contactors and starters with 120V or 240V AC coils. The purpose of the suppressor is to limit voltage transients for applications requiring interface with solid-state components. One suppressor is required per coil.
	RC Module             AC Operating Mechanism 24…48V AC, 50/60 Hz	00¬	100-FSC48
	110…280V AC, 50/60 Hz		100-FSC280
	380…480V AC, 50/60 Hz		100-FSC480
	Varistor Module             AC/DC Operating Mechanism 12…55V AC/ 12…77V DC	00¬	100-FSV55
Cat. No. 100-FSC280	56…136V AC/ 78…180V DC		100-FSV136
	137…277V AC/ 181…350V DC		100-FSV277
	278…575V AC		100-FSV575
	12…120V AC	0…5	599-K04
	240…264V AC Varistor		599-KA04
	12…120V AC	6	199-FSMA1T
	12…120V AC Varistor		199-GSMA1‡
Cat. No. 599-K04	120V AC	7…8	700-N24
¬ For non-combination starters only.
T For use on the interposing relay.
‡ For use on the contactor or starter.

Description		NEMA Size	Cat. No.
	Terminal and Lug Covers         Line side terminal covers	0…1	599-TC01N
		2	599-TC2N
		3	599-TC3N
		4	599-TC4N
		5	599-TC5N
	Line side terminal covers (reversing)	0…1	599-TC01R
	Tie Point Terminal	0…2	599-TP02
		3…5	599-TP34

Description	For Use With	No. of Poles	NEMA Size	Cat. No.
Protective Covers	500/F/FL, 500L, 500LP, 505	3	0…1	599-PC01
	509, 505, 520E (2), 520F/G	3	0…1	599-PS01Ø
	500L, 500LP	5	0…1	599-PC01-5z
	520F/G	5	0…1	599-PS01-5Ø
	500/F/FL, 500L, 500LP, 505	3	2	599-PC2
	509, 505, 520E (2), 520F/G	3	2	599-PS2Ø
	500L, 500LP	5	2	599-PC2-5z
	520F/G	5	2	599-PS2-5Ø
	500/F/FL, 500L, 500LP, 505	3	3	599-PC3
	509, 505, 520E (2), 520F/G	3	3	599-PS3Ø
	500L, 500LP	5	3	599-PC3-5z
	520F/G	5	3	599-PS3-5Ø
	500/F/FL, 500L, 500LP, 505	3	4	599-PC4
	509, 505, 520E (2), 520F/G	3	4	599-PS4Ø
	500L, 500LP	5	4	599-PC4-5z
	520F/G	5	4	599-PS4-5Ø
	500/F/FL, 500L, 500LP	3	5	599-PC5
Cat. No. 599‑PS01	509	3	5	599-PS5Ø
z Used on 5-pole contactors and starters.
Ø Bul. 592 Eutectic alloy or solid-state overload relays.

Contactor Accessories, continued

For use on Bulletins 500, 500F, 500L, 500LP, 502, 502L, 503, 503L, 505, 505V, 506, 506X, 507, 507X, 509, 512, 512H, 512M, 512V, 513, 513H, 513M, 513V, 520, 520V, 522, 523, 530, 532, 533, 540, 542, 543, 570, 572, 573, 1242, 1243, 1272, 1273, 1282, 1283, 1232X, 1232V, 1233X and 1233V, Continued

Timer Attachment Kit — A pneumatic timer attachment may be field installed in the space of two adjacent auxiliary contact blocks. Timing units are available for either ON-Delay or OFF-Delay operation with a timed set of one (1) N.O. and one (1) N.C. snap-action contacts that are electrically isolated. Repetitive accuracy within the timer range is approximately ±10% provided a minimum reset time of 75 ms is allowed. Note: Sizes 0…5: Timers can be added to the left- or right-hand side of the contactor body. On Size 00 they can be mounted to the front of the contactor. Size 0, 1 and 2: Timers cannot be used on the same side as power pole adders. Size 2 Devices: The operating coil must be changed. See Bulletin 500 Line of Contactors and Starters and refer to the size 2 operating coil listing. Order the coil listed for a 4‑…5‑pole device. Note: These coils can also be factory installed. Enclosed Devices: Please contact your local Rockwell Automation sales office or Allen-Bradley distributor. Contact Ratings:  NEMA A600 (10 A, 600V AC max.) NEMA P300 (5 A, 300V DC max.)
Description		NEMA Size	Cat. No.
	On-Delay	00§	100-FPTA30
	On-Delay		100-FPTA180
	Off-Delay		100-FPTB30
	Off-Delay		100-FPTB180
	Left-hand ON Delay	0…5	596-TL32
	Left-hand OFF Delay		596-TL33
	Right-hand ON Delay		596-TR32
Cat No. 596-TR32	Right-hand OFF Delay		596-TR33
§ For open type, non-combination starters only.

Description		NEMA Size	Cat. No.
Auxiliary Contact — Contactors	1 N.O.	0…5	595-A
	2 N.O.	0…5	595-AA
	1 N.C.	0…5	595-B
	2 N.C.	0…5	595-BB
	1 N.O. and N.C.	0…5	595-AB
	1 N.C.L.B.	0…5	595-BL
	1 N.O.	6	195-GA10
	1 N.O.	7	§	1495-J6
	2 N.O.	6	195-GA20
	2 N.O.	7…8	§	1495-K6
	2 N.O.	9	§	1495-K8
	1 N.C.	6	195-GB01
	1 N.C.	7…9	§	1495-J6
	2 N.C.	6	195-GB02
	2 N.C.	7…8	§	1495-K6
	2 N.C.	9	§	1495-K8
	1 N.O. and N.C.	6	195-GB11
	2 N.O.	7…8	§	1495-K6
	2 N.O.	9	§	1495-K8
	1 N.C.L.B.	6	195-GL01
§ The normally open contacts can easily be changed to normally closed in the field.

Power Pole Adders — The 1 N.O. and 1 N.C. power poles may be field added to all size 0…4 Bulletin 500 line contactors and starters except the Bulletin 500L and 500FL. Two- and three-pole contactors will accept a maximum of two adder poles and four-pole devices will accept one adder pole. Each adder pole kit includes a mechanical load balancer to be used when only one power pole is added. Note: When power poles are added to Size 2, 3, or 4 (2- or 3-pole devices) the operating coil must be changed. Refer to the listing for the size of your contactor or starter. Order the operating coil listed for a 4-…5-pole device. Note: These coils can also be factory installed.
Description		NEMA Size	Cat. No.
	1 N.O.	0…1	599-P01A
	1 N.C.		599-P01B
	1 N.C. Late Break		599-P01BL
	1 N.O.	2	599-P2A
	1 N.C.		599-P2B
	1 N.C. Late Break		599-P2BL
	1 N.O.	3	599-P3A
	1 N.C.		599-P3B
Cat. No. 599-P01A (1 N.O.) Size 0…1, 27 Amps.	1 N.O.	4	599-P4A
	1 N.C.		599-P4B
Contactor Kick-off Springs — For horizontal mounting of 2- or 3-pole Bulletin 500 contactors and starters. Note: When kick-off springs are added to Size 2, 3 or 4, the operating coil must be changed. Refer to the listing for the size of your contactor or starter. Order the operating coil listed for a 4-pole device. Note: These coils can also be factory installed.
Description		NEMA Size	Cat. No.
	—	0…1	599-N11
		2	599-N12
		3	599-N13
		4…5	599-N14

	Wire Size	NEMA Size	Cat. No.
	Lug Connectors (3 per package)
	#14…8 AWG Wire	0…1	¬
	#14…4 AWG Wire	2	1494R-N1
	#8…1/0 AWG Wire	3	1494R-N2
	#6…4/0 AWG Wire	4	1494R-N3
Cat. No. 1494R-N3	2 of #1/0…350 MCM Wire	5	42450-804-01
¬ All terminals of the 30 A switches are furnished with self-lifting pressure plate connectors as standard.

Description			NEMA Size	Cat. No.
	Terminal Lug Kit	Two #1/0 150…500 MCM 1 required per terminal	6	199-LJ1
	Terminal Lug Kit	#4 AWG…500 MCM 3 required per terminal for Size 7 and 4 required per terminal for Size 8	7…8	199-LG1

Description		NEMA Size	Cat. No.
Auxiliary Contact Adder Decks — The same 2- and 4-pole auxiliary contact blocks in various combinations of normally open and normally closed will slide and snap on to the front of the contactor. Adder decks have convenient backed out wire clamps to make lugging of control wires unnecessary. Fits on Open Type devices only.
	2 N.O.	00	100-FA20
	1 N.O. -1 N.C.		100-FA11
	2 N.C.		100-FA02
	4 N.O.		100-FA40
	3 N.O.-1 N.C.		100-FA31
	2 N.O. -2 N.C.		100-FA22
4-pole	4 N.C.		100-FA04
24V DC Interface Module — Mounts to the top of the contactor. It provides a 24V DC, 0.5 w input signal that can be used to operate the 24…240V AC coil of the contactor. Fits on Open Type devices only.
	—	00	100-JE
Latch Attachment — On the front of the contactor. Fits on Open Type devices only.
	—	00	100-FL11Ä
Interposing Contactor — For open type Bulletin 500 and 500L.	120V, 60 Hz	6	500-NX100D
	240V, 60 Hz	6	500-NX100A
Device Markers — Snap easily into the coil cover of contactors and starters for component identification. A maximum of five markers will fit on each contactor or starter. (Standard: 50 device markers per package)
	—	0…5	599-DM ‡  5
Bulletin 500 with device markers
Top Wiring Kit — Consists of (3) power lugs for the purpose of making extra connections to the load side of the contactor. A second set of overload relays can be wired to these lugs if two motors are being controlled by a single contactor.
	—	0…1	599-TW01
	—	2	599-TW2
	—	3	599-TW3
	—	4	599-TW4
Cat No. 599-TW01	—	5	599-TW5P

Ä Voltage Suffix Code

The cat. no. as listed is incomplete. Select a voltage suffix code from the table below to complete the Cat. No.
Example: 120V, 60 Hz: Cat. No. 100-FL11Ä becomes Cat. No. 100-FL11D. For other voltages, please consult your local Rockwell Automation sales office or Allen‑Bradley distributor.

	[V]	24	48	100	110	120	230… 240	240	277	380… 400	400… 415	400	480
50 Hz		K	Y	KP	D	—	VA	T	—	N	G	B	—
60 Hz		J	—	—	—	D	—	A	T	—	—	N	B
‡ To complete cat. no., insert in the third position the desired numeric symbol (0…5) or one of the following letters — A, B, C, D, E, F, H, L, M, P, R, S, T, U, or W.

Contactor Accessories, continued

Description			Enclosure Type	NEMA Size	Cat. No.
		Adapter Plates — For replacement of: Allen-Bradley (Bulletin 709 Series K) Cutler Hammer (Citation & Freedom Series) Furnas (Class 14 and ESP 100) General Electric (Series 300) Joslyn-Clark (Type HP) Square D (Type S) Westinghouse (A200 and W200 Advantage)	1 (hinged), 3R, 3R/4/12, 4/4X (stainless)	0, 1	599-CP01
				2	599-CP2

For use on Bulletins 512V, 513V, 1232V, 1233V

Contactors are supplied with one normally open and one normally closed auxiliary contact (A600 rating) as standard. Additional auxiliary contacts, two normally open and two normally closed, can be added in the field.

Description	Cat. No.
Auxiliary Contact (10 A @ 600V)	1195C-N3
Auxiliary Contact (10 mA @ 5V DC)	1195C-N4

Overload Accessories

For use on Bulletins 500, 500F, 500FL, 500L, 500LP, 502, 502L, 503, 503L, 505, 505V, 506, 506X, 507, 507X, 509, 512, 512H, 512M, 512V, 513, 513H, 513M, 513V, 520, 520V, 522, 523, 530, 532, 533, 540, 542, 543, 570, 572, 573, 1242, 1243, 1272, 1273, 1282, 1283, 1232X, 1232V, 1233X, and 1233V

Description		NEMA Size	Cat. No.
	Auxiliary Contact — For eutectic alloy overload relays only¬
	1 N.O.	00, 3-phaseT	595-A00
	1 N.C.	00, 3-phaseT	595-B00
	1 N.O.	0…2, 5…9	595-A02
Auxillary Contact — For eutectic alloy overload relays only¬  Contact Ratings — NEMA A600 (10 A, 600V AC max.) NEMA P300 (5 A, 300V DC max.)	1 N.C.		595-B02
	1 N.O.	3…4	595-A34‡
	1 N.C.		595-B34§

Description		Max. Continuous Current Rating [A]	Cat. No.
	DIN Rail Mounting Adapter for Bulletin 592 compact type 3-pole overload relays	40	599-MP1
	DIN Rail Mounting Adapter for Bulletin 592 compact type 1-pole overload relays	62	599-MP2

¬ Auxiliary contact for solid-state overload relays is included in the product.
T Non-combination starters only.
‡ Auxiliary contact mounted on right-hand side of overload relay provides N.O. contact function. Auxiliary contact mounted on left-hand side of overload relay provides N.C. contact function.
§ To be mounted on right-hand side of overload to provide additional AC contact function.

Voltage Control Accessories

For use on Bulletins 500, 500F, 500L, 500LP, 502, 502L, 503, 503L, 505, 505V, 506, 506X, 507, 507X, 509, 512, 512H, 512M, 512V, 513, 513H, 513M, 513V, 520, 520V, 522, 523, 530, 532, 533, 540, 542, 543, 570, 572, 573, 1242, 1243, 1272, 1273, 1282, 1283, 1232X, 1232V, 1233X, and 1233V

Control Circuit Transformer with Top-Mounted Fuse Block Kits (Pre-Wired)¬ T 

	NEMA Size	Primary Voltage	Capacity – 120V Secondary Voltage
			Standard		100 W Extra		200 W Extra		300 W Extra		400 W Extra
			VA	Cat. No.	VA	Cat. No.	VA	Cat. No.	VA	Cat. No.	VA	Cat. No.
	0…2	208V	80	1497-N1PK	130	1497-N15PK	250	1497-N7PK	350	1497-N10PK	500	1497-N18PK
		240V & 480V		1497-N2PK		1497-N16PK		1497-N8PK		1497-N11PK		1497-N19PK
		600V		1497-N3PK		1497-N17PK		1497-N9PK		1497-N12PK		1497-N20PK
	3	208V	200	1497-N4PK	250	1497-N7PK	350	1497-N10PK	500	1497-N18PK	500	1497-N18PK
		240V & 480V		1497-N5PK		1497-N8PK		1497-N11PK		1497-N19PK		1497-N19PK
		600V		1497-N6PK		1497-N9PK		1497-N12PK		1497-N20PK		1497-N20PK
	4	208V	250	1497-N7PK	350	1497-N10PK	500	1497-N18PK	—	—	—	—
		240V & 480V		1497-N8PK		1497-N11PK		1497-N19PK	—	—	—	—
		600V		1497-N9PK		1497-N12PK		1497-N20PK	—	—	—	—
	5	208V	350	1497-N10PK	500	1497-N18PK	—	—	—	—	—	—
		240V & 480V		1497-N11PK		1497-N19PK	—	—	—	—	—	—
		600V		1497-N12PK		1497-N20PK	—	—	—	—	—	—
	6	208V	500	1497-N18PK	—	—	—	—	—	—	—	—
		240V & 480V		1497-N19PK	—	—	—	—	—	—	—	—
		600V		1497-N20PK	—	—	—	—	—	—	—	—
¬ Transformers for NEMA sizes 7…9 are included as standard.
T Type 4/4X non-metallic enclosures and Type 7 & 9 hazardous location enclosures require transformers with separately mounted fuse blocks. For a complete listing of transformers, see Bulletin 1497 — Global Control Circuit Transformers.

Control Circuit Transformers with Top Mounted Fuse Blocks‡ T 

	NEMA Size	Primary Voltage/ 3 Pole Fuse Block	Capacity – 120V Secondary Voltage
			Standard
			VA	Cat. No.
	0…2	208V	80	1497-B-HXDX-3-N
		240V & 480V		1497-B-BASX-3-N
		600V		1497-B-CXSX-3-N
	3	208V	200	1497-D-HXDX-3-N
		240V & 480V		1497-D-BASX-3-N
		600V		1497-D-CXSX-3-N
	4	208V	250	1497-E-HXDX-3-N
		240V & 480V		1497-E-BASX-3-N
		600V		1497-E-CXSX-3-N
	5	208V	350	1497-F-HXDX-3-N
		240V & 480V		1497-F-BASX-3-N
		600V		1497-F-CXSX-3-N
‡ Transformers can be installed in Type 1, 3R, 3R/4/12 painted enclosures and Type 4/4X stainless steel enclosures.
T Type 4/4X non-metallic enclosures and Type 7 & 9 hazardous location enclosures require transformers with separately mounted fuse blocks. For a complete listing of transformers, see Bulletin 1497 — Global Control Circuit Transformers.

Voltage Control Accessories, continued

For use on Bulletins 500, 500F, 500L, 500LP, 502, 502L, 503, 503L, 505, 505V, 506, 506X, 507, 507X, 509, 512, 512H, 512M, 512V, 513, 513H, 513M, 513V, 520, 520V, 522, 523, 530, 532, 533, 540, 542, 543, 570, 572, 573, 1242, 1243, 1272, 1273, 1282, 1283, 1232X, 1232V, 1232X, and 1233V, Continued

For Use When Fuse Block Is Not Integrated with the Transformers

Cat. No. 1491-R165 1-Pole Fuse Block	Cat. No. 1491-R167 2-Pole Fuse Block	Cat. No. 1491-R171 3-Pole Fuse Block
Cat. No. 1491-R169 3-Pole Fuse Block	Cat. No. 1491-R150 Fuse Cover without Fuse

These control circuit fusing kits are intended to be used for control circuit transformer protection and protection of control circuits capable of delivering no more than 200 000 RMS symmetrical amperes, 600V maximum. (Fuses not included)

Description¬	Cat. No.
One-pole kit — panel-mounted (midget fuse)T	1491-R165
Control Circuit Fuse Block For Class CC rejection type fuses (fuses not included)T	1491-R162
Two-pole kit — panel-mounted (two midget fuses)T	1491-R167
Three-pole kit — panel-mounted (one midget fuse/two Class CC fuses)T	1491-R169
Three-pole kit — panel-mounted (three Class CC fuses)	1491-R171
Single-pole kit — Bulletin 500 line controller mounted (Class CC fuses)‡	599-FR04
One-pole kit — panel-mounted (31…60 A Class J fuse)	1491-R173
One-pole kit — panel-mounted (61…100 A Class J fuse)	1491-R175
¬ For control circuit transformers with a 350 VA or larger rating, it is recommended that Bussmann Type FNQ-R, Ferraz-Shawmut Type ATDR, Littelfuse Type KLDR time delay fuses, or equivalent be used for primary fusing.
T These kits use only Class CC or midget fuses (rated 0.5…30 A) such as those offered by the following manufacturers: •  Bussmann KTK-R •  Ferraz-Shawmut ATM R •  Littelfuse KLK
‡ Cat. No. 599-FR04 is rated for 6 A fuse maximum. Controller mounting applies to size 0…5 devices only.
§ One cover per pole is required. Example: transformer with top-mounted fuse block requires three covers. Fuse block kit for separate control requires two covers. Fuses not included.

Description		NEMA Size	Cat. No.
	Single-pole kit — Bulletin 500 line controller mounted (Class CC fuses)	0…5	599-FR04
Note:One cover per pole is required. Example: transformer with top-mounted fuse block requires three covers. Fuse block kit for separate control requires two covers.

Disconnect Switch Accessories

For use on Bulletins 502, 502L, 506, 506X, 512, 512H, 512M, 512V, 522, 532, 542, 572, 1242, 1272, 1282, 1232X, and 1232V

	Description	NEMA Size	Cat. No.
	Fuse Clips
	0…30 A, 250V AC, Class H	0…2	1401-N41
	0…30 A, 250V AC, Class J 0…30 A, 600V AC, Class H 0…30 A, 600V AC, Class J 31…60 A, 250V AC, Class H	1…3	1401-N42
	31…60 A, 250V AC, Class J 31…60 A, 600V AC, Class H 31…60 A, 600V AC, Class J	1…3	1401-N43
	61…100 A, 250V AC, Class H 61…100 A, 250V AC, Class J 61…100 A, 600V AC, Class H 61…100 A, 600V AC, Class J	2…4	1401-N44
	101…200 A, 250V AC, Class H 101…200 A, 250V AC, Class J 101…200 A, 600V AC, Class H 101…200 A, 600V AC, Class J	3…5	1401-N45
	201…400 A, 250V AC, Class H 201…400 A, 250V AC, Class J 201…400 A, 600V AC, Class H 201…400 A, 600V AC, Class J	4…5	1401-N46
	0…30 A, 250V AC, Class R 0…30 A, 600V AC, Class R 31…60 A, 250V AC, Class R	0…2T	1401-N50
			1401-N51
	31…60 A, 600V AC, Class R	1…3	1401-N52
	61…100 A, 250V AC, Class R 61…100 A, 600V AC, Class R	2…4	1401-N53
	101…200 A, 250V AC, Class R 101…200 A, 600V AC, Class R	3…5	1401-N54
	201…400 A, 250V AC, Class R 201…400 A, 600V AC, Class R	5…6	1401-N55
	0…30 A, 250V AC HRC Form II Fusing¬  0…30 A, 600V AC HRC Form II Fusing¬  31…60 A, 250V AC HRC Form II Fusing¬  31…60 A, 600V AC HRC Form II Fusing¬	0…2T  1…3	z
	61…100 A, 250V AC HRC Form II Fusing¬  61…100 A, 600V AC HRC Form II Fusing¬	2…4	1401-HRC100
	101…200 A, 250V AC HRC Form II Fusing¬  101…200 A, 600V AC HRC Form II Fusing¬	3…5	1401-HRC200
	201…400 A, 250V AC HRC Form II Fusing¬  201…400 A, 600V AC HRC Form II Fusing¬	4…5	1401-HRC400
	Auxiliary Contacts for Disconnect Switches 1 N.O.	0…5	1495-N8
	1 N.C.	0…5	1495-N9
¬ HRC Form II fusing for Canada only.
T For 0…30 A only.
z Fuse clip not required. Fuse bolts directly to switch and trailer fuse block.

	Description			For Use With	Cat. No.
	Lug Connectors (3 per package)			1494C, 1494F, 1494G, and 1494V Disconnect Switches
	Disconnect Size [A]	Wire Size
	30	#14…8 AWG Wire			¬
	60	#14…4 AWG Wire			§	1494R-N1
	100	#8…1/0 AWG Wire			§	1494R-N2
	200	#6…4/0 AWG Wire			§	1494R-N3
	400	(2) of #1/0…250 MCM Wire			1494R-N14
	400	#4 AWG…500 MCM Wire (oversized)			1494R-N15
	600	(2) of #1/0…350 MCM Wire			§	1494R-N10
Cat. No. 1494R-N3	600	(2) of #1/0…350 MCM Wire		1491-N621 or 1491-R621 600 A fuse blocks	§	1494R-N11
	Protective Fuse Covers
	Switch Rating [A]	Fuse Class	Fuse Clip Rating [A]		Cat. No.
			250V	600V
	30 30 60 30 60 60 100	Nonfusible H, R H, R J J Nonfusible Nonfusible	— 30 60 30 60 — —	— — — 30 60 — —	1495-N64
	30 60 100	H, R H, R J	— — 100	30 60 100	1495-N65
	100	H, R	100	100	1495-N66
	200 200	Nonfusible H, J, R	— 200	— 200	Ø	1495-N67
	200 200	Nonfusible H, J, R	— 200	— 200	z	1495-N62
	400 400	Nonfusible H, J, R	— 400	— 400	Ø	1495-N68
	400 400	Nonfusible H, J, R	— 400	— 400	z	1495-N63
	600	Nonfusible J	— 600	— 600	Ø	1495-N61
¬ All terminals of the 30 A switches are furnished with self-lifting pressure plate connectors (N56, N57, and N58) as standard.
§ Each kit contains three lugs.
§ Each kits contains two lugs.
Ø Switch with right-hand mechanism.
z Switch with left-hand mechanism.

Circuit Breaker Accessories

For use on Bulletins 503, 503L, 507, 507X, 513, 513H, 513M, 513V, 523, 533, 543, 573, 1243, 1273, 1283, 1233X, and 1233V

Description		NEMA Size	Cat. No.
	Circuit Breaker Kits
	3 A, 0…1/3 Hp @ 200 and 230V 3 A, 0…1 Hp @ 460 and 575V	0…1	1401-N60
	7 A, 0.5…1 Hp @ 200 and 230V 7 A, 1.5…3 Hp @ 460 and 575V	0…1	1401-N61
	15 A, 1.5…3 Hp @ 200 and 230V 15 A, 5…7.5 Hp @ 460 and 575V	0…1	1401-N62
	30 A, 5 Hp @ 200V 30 A, 5…7.5 Hp @ 230V 30 A, 10…15 Hp @ 460 and 575V	1…2	1401-N63
	50 A, 5…10 Hp @ 200V 50 A, 10 Hp @ 230V 50 A, 20…25 Hp @ 460V 50 A, 20…30 Hp @ 575V	1…3	1401-N64
	100 A, 15…25 Hp @ 200 and 230V 100 A, 30…50 Hp @ 460V 100 A, 40…50 Hp @ 575V	2…4	1401-N65
	150 A, 30 Hp @ 200V 150 A, 30…40 Hp @ 230V 150 A, 60…75 Hp @ 460V 150 A, 75…100 Hp @ 575 V	3…4	1401-N66
	250 A, 125 Hp @ 575V	5	1401-N68
	250 A, 50…60 Hp @ 200V 250 A, 60…75 Hp @ 230V		1401-N69
	Auxiliary Contacts for Disconnect Switches		1495-N8
	One normally open (1 N.O.) Adapter kit may be required. ¬  Bolted — One normally open (1 N.O.)T  Unilock — One normally open (1 N.O.)T	0…5‡  4…5§
	One normally closed (1 N.C.) Adapter kit may be required.¬  Bolted — One normally closed (1 N.C.)T  Unilock — One normally closed (1 N.C.)T	0…5	1495-N9
	Unilock — One normally open (1 N.O.)T	0…2	1495-N14
	Unilock — One normally closed (1 N.C.)T	0…2	1495-N15
	HMCP Circuit Breaker Adapter Kits (for mounting 1 or 2 auxiliary contacts) 400 A FrameT	5	1495-N16
	150 A Frame	3…4	1495-N21
	250 A Frame - Enclosure Type 1, 3R/4/12, 3R and 4/4X (stainless steel) 250 A Frame - Enclosure Type 7 & 9 (bolted & Unilock) and 4/4X (non-metallic)	4…5§  0…5Ø	1495-N22
	250 A Frame - Enclosure Type 1, 3R/4/12, 3R, and 4/4X (stainless steel)	4	1495-N23
	Unilock — 150 A FrameT	3…4	1495-N21
	Unilock — 250 A FrameT	4…5	1495-N22
¬ Contact Ratings — NEMA B600 and NEMA P600.
T Not available on larger sizes 6…9.
‡ For Bolted and 1 N.O.
§ For Unilock 1 N.C.
§ For Enclosure Type 1.
Ø For Enclosure Types 7 & 9.

Pilot Device Accessories

For use on Bulletins 500, 500F, 500L, 500LP, 502, 502L, 503, 503L, 505, 505V, 506, 506X, 507, 507X, 509, 512, 512H, 512M, 512V, 513, 513H, 513M, 513V, 520, 520V, 522, 523, 530, 532, 533, 540, 542, 543, 570, 572, 573, 1242, 1243, 1272, 1273, 1282, 1283, 1232X, 1232V, 1233X, and 1233V

Description		Enclosure Type	NEMA Size	Cat. No.
	Selector Switch Kits
	OFF-ON/HAND-OFF-AUTO¬ T	1 (Lift-off)	00	599-SS00
			0…2	599-SS02
	HAND-OFF-AUTO	1, 3R/4/12	0…5	599-SS09HJ
		4, 4X (stainless steel and non-metallic)		599-SS09HS
	OFF-ON	1, 3R/4/12		599-SS09OJ
		4, 4X (stainless steel and non-metallic)		599-SS09OS
	FOR-OFF-REV	1, 3R/4/12		599-SS09RJ
		4, 4X (stainless steel and non-metallic)		599-SS09RS
	TEST-OFF-AUTO (spring return from TEST)	1, 3R/4/12		599-SS09TJ
		4, 4X (stainless steel and non-metallic)		599-SS09TS
	OFF-ON/ HAND-OFF-AUTO¬ T	1 (Lift-off)	3…5	599-SS34
	FOR-OFF-REV (Unilock)	3R, 7 & 9	0…2	1481-N48
	OFF-ON (Unilock)			1481-N54
	HAND-OFF-AUTO (Unilock)			1481-N55
	OFF-ON (Unilock)		3…5	1481-N59
	HAND-OFF-AUTO (Unilock)			1481-N60
	FOR-OFF-REV (Unilock)			1481-N62
	Push Button Kits
	START-STOP¬ T	1 (Lift-off)	00	599-PB00
			0…2	599-PB02
			3…5	599-PB34
	START-STOP	1, 3R/4/12	0…5	599-PB09SJ
		4, 4X (stainless steel and non-metallic)		599-PB09SS
	FOR-REV-STOP	1, 3R/4/12		599-PB09RJ
		4, 4X (stainless steel and non-metallic)		599-PB09RS
	HIGH-LOW-STOP	1, 3R/4/12		599-PB09WJ
		4, 4X (stainless steel and non-metallic)		599-PB09WS
	START-STOP (Unilock)	7 & 9	0…2	1481-N53
			3…5	1481-N58
	START-STOP (bolted)		0…9	Use 800H-DPH16AAXX64
¬ Bulletins 500, 505, 509, 520 with control transformer are supplied from the factory in Type 1 (hinged) enclosures.
T For non-combination starters only.

Pilot Device Accessories, continued

For use on Bulletins 500, 500F, 500L, 500LP, 502, 502L, 503, 503L, 505, 505V, 506, 506X, 507, 507X, 509, 512, 512H, 512M, 512V, 513, 513H, 513M, 513V, 520, 520V, 522, 523, 530, 532, 533, 540, 542, 543, 570, 572, 573, 1242, 1243, 1272, 1273, 1282, 1283, 1232X, 1232V, 1233X, and 1233V, Continued

Description		Enclosure Type	NEMA Size	Cat. No.
	Pilot Light Kits‡  120V	1, 3R/4/12	0…5	599-PL09DJ
	120V	4, 4X (stainless steel and non-metallic)		599-PL09DS
	240V	1, 3R/4/12		599-PL09AJ
	240V	4, 4X (stainless steel and non-metallic)		599-PL09AS
	480V	1, 3R/4/12		599-PL09BJ
	480V	4, 4X (stainless steel and non-metallic)		599-PL09BS
	600V	1, 3R/4/12		599-PL09CJ
	600V	4, 4X (stainless steel and non-metallic)		599-PL09CS
	ON¬ T §	1 (Lift-off)	00	599-PL00Ä
			0…2	599-PL02Ä
			3…9	599-PL34Ä
	Optional Pilot Light Lens Covers Red	All	0…5	800T-N26R
	Green			800T-N26G
	Amber			800T-N26A
	Blue			800T-N26B
	Clear			800T-N26C
	White			800T-N26W
	ON (Unilock 120V) — RedT §	3R, 7 & 9 (Unilock)	0…5	1481-N56A120R
	ON (Unilock 120V) — GreenT §			1481-N56A120G
	Push-to-Test Pilot Light Kits‡  120V	1, 3R/4/12	0…5	599-PT09DJ
	120V	4, 4X (stainless steel and non-metallic)		599-PT09DS
	240V	1, 3R/4/12		599-PT09AJ
	240V	4, 4X (stainless steel and non-metallic)		599-PT09AS
	480V	1, 3R/4/12		599-PT09BJ
	480V	4, 4X (stainless steel and non-metallic)		599-PT09BS
	600V	1, 3R/4/12		599-PT09CJ
	600V	4, 4X (stainless steel and non-metallic)		599-PT09CS
	Optional Push-to-Test Pilot Light Lens Covers Red	All	0…5	800T-N40
	Green			800T-N41
	Amber			800T-N42
	Blue			800T-N43
	Clear			800T-N45
	White			800T-N44

Ä Voltage Suffix Code

The Cat. No. as listed is incomplete. Select a voltage suffix code from the table below to complete the cat. no.
Example: Cat. No. 599-PL02Ä becomes Cat. No. 599-PL02B. For other voltages, please consult your local Rockwell Automation sales office or Allen‑Bradley distributor.

	[V]	115…120	230…240	460…480	575…600
60 Hz		D	A	B	C
¬ For non-combination starters only.
T Bulletins 500, 505, 509, and 520 with control transformer are supplied from the factory in Type 1 (hinged) enclosures.
‡ Pilot light kits and push-to-test pilot light kits include one green and one red cover as standard.
§ An adapter (Cat. No. 1481-N61) is required for each pilot light added to Size 3, 4, and 5 Unilock enclosures.
§ Supplied with red lens only.
Note:Bulletins 505 and 520 with two pilot lights are supplied in hinged enclosures, with or without control circuit transformers.

Pilot Device Accessories, continued

For use on Bulletins 500, 500F, 500L, 500LP, 502, 502L, 503, 503L, 505, 505V, 506, 506X, 507, 507X, 509, 512, 512H, 512M, 512V, 513, 513H, 513M, 513V, 520, 520V, 522, 523, 530, 532, 533, 540, 542, 543, 570, 572, 573, 1242, 1243, 1272, 1273, 1282, 1283, 1232X, 1232V, 1233X, and 1233V, Continued

Description		Enclosure Type	NEMA Size	Cat. No.
	ON T  (Unilock) — Red Lens (120V)	3R, 7 & 9 (Unilock)	0…5	1481-N56A120R
	ON T  (Unilock) — Green Lens (120V)			1481-N56A120G
	Transformers for pilot lights 240V, 60 Hz and 220V, 50 Hz¬		00…5	1481-NX1
	480V, 60 Hz and 440V, 50 Hz			1481-NX2
	600V, 60 Hz and 550V, 50 Hz			1481-NX3
	Replacement Bulbs for all Pilot Lights 120V coil voltage - incandescent Amber, green, red, or blue lens color	—	—	800T-N169
	120V coil voltage - LED Amber lens color	—	—	800T-N320A
	Green lens color	—	—	800T-N320G
	Red lens color	—	—	800T-N320R
	Blue lens color	—	—	800T-N320B
	240/480/600V coil voltage - incandescent Amber, green, red, or blue lens color	—	—	800T-N65
	240/480/600V coil voltage - LED Amber lens color	—	—	800T-N318A
	Green lens color	—	—	800T-N318G
	Red lens color	—	—	800T-N318R
	Blue lens color	—	—	800T-N318B
	Additional Pilot Devices Additional pilot devices	1, 3R/4/12	0…9	Use Bulletin 800T devices (See Bulletin 800T/800H 30.5 mm Push Buttons)
	Additional pilot devices	4/4X, 4X	0…9	Use Bulletin 800H Type 4X devices (See Bulletin 800T/800H 30.5 mm Push Buttons)
	Additional pilot devices (bolted)	3R, 7 & 9	0…9	Use Bulletin 800H Type 7 & 9 devices (See Bulletin 800H/Hazardous Location Push Buttons)
¬ When the control voltage is other than 120V, 60 Hz or 110V, 50 Hz it is necessary to also use one of the following transformers.
T An adaptor (Cat. No. 1481-N61) is required for each pilot light added to size 3, 4, and 5 Unilock enclosures.

Enclosure Accessories

For use on Bulletins 500, 500F, 500L, 500LP, 502, 502L, 503, 503L, 505, 505V, 506, 506X, 507, 507X, 509, 512, 512H, 512M, 512V, 513, 513H, 513M, 513V, 520, 520V, 522, 523, 530, 532, 533, 540, 542, 543, 570, 572, 573, 1242, 1243, 1272, 1273, 1282, 1283, 1232X, 1232V, 1233X, and 1233V

Description		Enclosure Type	NEMA Size	Cat. No.
	Metallic Conduit Connectors 1 in. (24.5 mm)	1, 3R/4/12, 3R	0…1	1232-N11
	1-1/4 in. (31.75 mm)		2	1232-N12
	1-1/2 in. (38.1 mm)		3	1232-N13
	2-1/2 in. (63.5 mm)		4	1232-N14
	3 in. (76.2 mm)		5	1232-N15
	Non-metallic Conduit Connectors 1/2 in. (12.7 mm)	4, 4X (stainless steel and non-metallic)	0…1	1490-N1
	3/4 in. (19 mm)			1490-N9
	1 in. (24.5 mm)			1490-N10
	1-1/4 in. (31.75 mm)		2	1490-N11
	1-1/2 in. (38.1 mm)		3	1490-N5
	2 in. (50.8 mm)		4	1490-N6
	2-1/2 in. (63.5 mm)			1490-N7
	3 in. (76.2 mm)		5	1490-N8
	Grounding Adapters 1/2 in. (12.7 mm), #14…10 AWG	4, 4X (stainless steel and non-metallic)T	0…1	1490-N19
	3/4 in. (19 mm), #14…8 AWG			1490-N20
	1 in. (24.5 mm), #14…8 AWG			1490-N21
	1-1/4 in. (31.75 mm), #14…4 AWG		2	1490-N22
	1-1/2 in. (38.1 mm), #8…1/0 AWG		3	1490-N23
	2 in. (50.8 mm), #8…1/0 AWG		4	1490-N24
	2-1/2 in. (63.5 mm), #6…2/0 AWG			1490-N25
	3 in. (76.2 mm), #6…4/0 AWG		5	1490-N26
	Handle Kits with Universal Link for Switch and Breaker Painted Metal 5-1/2 in. base	1, 3R, 3R/4/12¬	0…4	1494F-M1
	Painted Metal 7-1/2 in. base		5	1494F-M2
	Stainless Steel 5-1/2 in. base	4/4X (stainless steel)	0…4	1494F-S1
	Stainless Steel 7-1/2 in. base		5	1494F-S2
	Nonmetallic Handle 5-1/2 in. base	1, 3R, 3R/4/12, 4/4X (non-metallic)	0…4	1494F-P1
	Hole Plugs 30.5 mm hole plug for pilot devices	All	0…5	800T-N1
	19.5 mm hole plug for resets and door safety hardware			598-N1
¬ For combination starters only.
T Bulletin 1490 grounding adapters are available for use with these conduit hubs. These bushings provide a convenient method of connecting a ground wire to the conduit system. See conduit connector (hub) above proper size.

Enclosure Accessories, continued

For use on Bulletins 500, 500F, 500L, 500LP, 502, 502L, 503, 503L, 505, 505V, 506, 506X, 507, 507X, 509, 512, 512M, 512V, 513, 513M, 513V, 520, 520V, 522, 523, 530, 532, 533, 540, 542, 543, 570, 572, 573, 1242, 1243, 1272, 1273, 1282, 1283, 1232X, 1232V, 1233X, and 1233V, Continued

Description		Enclosure Type	NEMA Size	Cat. No.
	Door Safety Hardware Kits Enclosure Size (H x W x D) 27 x 10 x 8.2 in.	3R/4/12T	0…2	1494F-V1
	30 x 20 x 9.7 in.		0…4	1494F-V2
	50 x 22 x 11.1 in.		3…4	1494F-V3
	56 x 30 x 14 in.		5	1494F-V4
	Breather Bulletin 505, 507, 509, and 513 — Unilock and bolted Class I, Groups C and D Class II, Groups E, F and G§ ‡		0…5	1401-N1
	Drain Bulletin 505, 507, 509, and 513 — Unilock and bolted Class I, Groups C and D Class II, Groups E, F and G§ ‡			1401-N2
	Breather Drain Combination§  Bulletin 505, 507, 509, and 513 — Unilock and bolted Class I, Groups C and D Class II, Groups E, F and G§ ‡			1401-N3
	Ground Lug Kits		0…2	599-GR1
			3…5	599-GR2
			6…7	599-GR3

Description of Accessory Kit	Size 0…2	Size 3	Size 4	Size 5	Size 6…9
	Cat. No.	Cat. No.	Cat. No.	Cat. No.	Cat. No.
Reset Buttons (Each Kit Contains One Reset)
Type 1, 3R/12 Bulletin 506…507 — One Kit Required Per Starter Bulletin 512…513 — One Kit Required Per Starter Bulletin 522…523 — Two Kits Required Per Starter	1493-N21	1493-N21	1493-N31	—	—
				1493-N21Ø	—
				—	—
Type 4/4X	—	—	1493-N32	—	—
Pneumatic Timer Mounting Plate Adapter (For Mtg. Bulletin 849A Timer)     Bulletin 509 and 513 — Unilock§	1401-N4	—	—	—	—
T Converts combination starter enclosure F to enclosure code D or J with door safety hardware.
‡ Standard on bolted Type 3R, 7 & 9.
§ The breather-drain combination can be in enclosure top as a breather or bottom as a drain. Specify (2) when both functions are required.
§ Unilock suitable for Types 7 & 9 or Types 3R, 7 & 9 with the addition of a drain or a breather and drain.
Ø For Bulletins 512…513 only.

System Accessories

For use on Bulletins 500, 500F, 500L, 500LP, 502, 502L, 503, 503L, 505, 505V, 506, 506X, 507, 507X, 509, 512, 512H, 512M, 512V, 513, 513H, 513M, 513V, 520, 520V, 522, 523, 530, 532, 533, 540, 542, 543, 570, 572, 573, 1242, 1243, 1272, 1273, 1282, 1283, 1232X, 1232V, 1233X, and 1233V

Description		Enclosure Type	NEMA Size	Cat. No.
	Power Monitor Kit¬ T  3-phase, 240V AC — (Time Mark Model A258)	1 (hinged), 3R, 3R/4/12, 4/4X (stainless)	0…7	599-PM1
	3-phase, 480V AC — (Time Mark Model A258B)			599-PM2
	Terminal Block¬  Panel Mount (6 point)‡	1 (hinged), 3R, 3R/4/12, 4/4X (stainless)	0…7	1492-HC6
	Timing Relays¬  120V AC, ON-Delay — 8-pin socket (Cat. No. 700-HN125) required 0.1…10 s	1 (hinged), 3R, 3R/4/12, 4/4X (stainless)	0…7	700-HT12AU120
	120V AC, ON-Delay — 8-pin socket (Cat. No. 700-HN125) required 1.0…180 s			700-HT12BU120
	120V AC, OFF-Delay — 11-pin socket (Cat. No. 700-HN126) required 0.1…10 s	1 (hinged), 3R, 3R/4/12, 4/4X (stainless)	0…7	700-HT22AU120
	120V AC, OFF-Delay — 11-pin socket (Cat. No. 700-HN126) required 1.0…180 s	1 (hinged), 3R, 3R/4/12, 4/4X (stainless)	0…7	700-HT22BU120
	Control Relays¬  DPDT 2-pole 2 Form C Single AgNi Contact	1 (hinged), 3R, 3R/4/12, 4/4X (stainless)	0…7	700-HA32A1
	3PDT 3-pole 3 Form C Single AgNi Contact	1 (hinged), 3R, 3R/4/12, 4/4X (stainless)	0…7	700-HA33A1
	Relay Sockets¬  8-pin socket	1 (hinged), 3R, 3R/4/12, 4/4X (stainless)	0…7	700-HN125
	11-pin socket		0…7	700-HN126
¬ For combination starters only.
T 3-phase power monitor kit includes the time mark phase monitor and socket.
‡ Up to two 6-point terminal blocks may be added to each combination starter.