Feeder Disconnect Lighting Contactors

Catalogs > Industrial Controls Catalog > Lighting Control > Feeder Disconnect Lighting Contactors > Bulletin 500LP Top Wiring Permanent Magnet Latching Contactors For Non-Motor and Lighting Loads

Bulletin 500LP Top Wiring Permanent Magnet Latching Contactors For Non-Motor and Lighting Loads

Product Selection

Build a Catalog Number

Your order must include 1) Cat. No. of contactor selected and 2) modifications, if any.

Note: For motor load application, order a Bulletin 500PM. For Bulletin 500PM information, contact your local Rockwell Automation sales office or Allen‑Bradley distributor.

Maximum Continuous Ampere Ratings [A]		Open Type Without Enclosure	Type 1 General Purpose Enclosure
Tungsten Lamp Loads (Maximum 480V Line 277V Load)	General Use
	Resistive Heating
	Ballast Lighting (Fluorescent)
	Discharge Lighting (Mercury Vapor High Pressure Sodium, and Metal Halide)	Cat. No.	Cat. No.
2 Power Poles Ÿ 600V AC Maximum Ÿ 60 Hz
15	20	500LP-AOÄ92	—
30	30	500LP-BOÄ92
60	60	500LP-COÄ92
100	100	500LP-DOÄ92
200	200	500LP-EOÄ92
300	300	500LP-FOÄ92
3 Power Poles Ÿ 600V AC Maximum Ÿ 60 Hz
15	20	500LP-AOÄ93	500LP-AAÄ930
30	30	500LP-BOÄ93	500LP-BAÄ930
60	60	500LP-COÄ93	500LP-CAÄ930
100	100	500LP-DOÄ93	500LP-DAÄ930
200	200	500LP-EOÄ93	500LP-EAÄ930
300	300	500LP-FOÄ93	500LP-FAÄ930
4 Power Poles Ÿ 600V AC Maximum Ÿ 60 Hz
15	20	500LP-AOÄ94	500LP-AAÄ940
30	30	500LP-BOÄ94	500LP-BAÄ940
60	60	500LP-COÄ94	500LP-CAÄ940
100	100	500LP-DOÄ94	500LP-DAÄ940
200	200	500LP-EOÄ94	500LP-EAÄ940
300	300	—	—

Ä Coil Voltage Code

The cat. no. as listed is incomplete. Select a coil voltage code from the table below to complete the cat. no. Example: Cat. No. 500LP-AOÄ92 becomes Cat. No. 500LP-AOD92. For other voltages, consult your local Rockwell Automation sales office or Allen‑Bradley distributor.

	[V]	24★	110- 115	115- 120	200- 208	220- 230	230- 240	240	277
AC, 50 Hz		K	S‡	—	—	P♣	—	T	—
AC, 60 Hz		J	—	D§	H	—	A∆	—	F
	[V]	380V	380- 400V	415V	440- 460V	460- 480V	500V	550V	575- 600V
AC, 50 Hz		N	KN	I	Q	—	M	R	—
AC, 60 Hz		—	—	U	—	B	—	—	C
★ When using 24V coils on sizes 4 or 5, an interposing relay may be required.
‡ This coil is optimized for 110…115V, 50 Hz applications, but can be used at 120V, 60 Hz nominal.
§ This coil is optimized for 115…120V, 60 Hz applications, but can be used at 110V, 50 Hz nominal.
♣ This coil is optimized for 220…230V, 50 Hz applications, but can be used at 240V, 60 Hz nominal.
∆ This coil is optimized for 230…240V, 60 Hz applications, but can be used at 220V, 50 Hz nominal.