Combination Lighting Contactors

Catalogs > Industrial Controls Catalog > Lighting Control > Combination Lighting Contactors > Bulletin 502L Combination Lighting Contactors

Bulletin 502L Combination Lighting Contactors

Introduction Standards Compliance and Certifications Cat. No. Explanation Product Selection Modifications for Combination Devices
Accessories Specifications Full Load Motor Currents Approximate Dimensions Renewal Parts
The information below is for reference purposes. Not all combinations will produce a valid cat. no. Refer to the tables on the following pages for product selection.

Example Cat. No.

502L A    A    CD 24R 90 1
a    b    c    d    e    f

a
Bulletin No.
Bulletin No. Description
502L Combination lighting contactor with disconnect switch
503L Combination lighting contactor with circuit breaker

b
Lighting Contactor Size
Code Max. Continuous Ampere Rating [A]
A 15…20
B 30
C 60
D 100
E 200
F 300

c
Enclosure Type
Code Description
A Type 1: General purpose, painted metal enclosure with spring latch door fastener, external overload relay reset, and non-metallic handle
F Type 3R/4/12: Rainproof, watertight, dusttight, painted metal enclosure with screw fasteners, and non-metallic handle
J Type 3R/4/12: Rainproof, watertight, dusttight, painted metal enclosure with door safety hardware, and metal handle
C Type 4/4X: Watertight corrosion-resistant stainless steel enclosure with screw fasteners, and a stainless steel handle

d
Coil Voltage
Voltage Code Description Line Voltage [V] Coil Voltage [V]
H Common control
(without transformer)
208 208
A 240 240
B 480 480
C 600 600
H Transformer
control⋆ 
208 120
A 240 120
B 480 120
C 600 120
AD Separate control
(without transformer)
208 120
240 120
CD 480 120
600 120

e
Fuse Clip
Code Rating Type
24R 30 Class R
25R 60 Class R
26R 100 Class R
27R 200 Class R
28R 400 Class R
25J 60 Class J
26J 100 Class J
27J 200 Class J

f
Options
See Contactor Accessories

⋆   Note
When selecting a factory-installed control circuit transformer use the Transformer Control Voltage Suffix Code to denote the transformer primary voltage. The transformer secondary voltage and starter coil will both be 120V AC by default. Example: Cat. No. 512-BAB-6P-24R will have a transformer with a 480V primary voltage, 120V secondary voltage, and a 120V starter coil voltage. If a starter coil voltage other than 120V is desired, a second Voltage Suffix Code must be added to denote the coil and transformer secondary voltage. Example: Cat. No. 512-BABJ-6P-24R will have a transformer with a 480V primary voltage, 24V secondary voltage, and a 24V starter coil voltage.