802T Plug-In

Catalogs > Sensors Catalog > Limit Switches > NEMA Style Limit Switches > 802T Oiltight > 802T Plug-In > Lever Type — Spring Return

Lever Type — Spring Return

Introduction Specifications Product Selection Accessories Approximate Dimensions Operating Levers
Operating Levers

For use with 802M, 802MC, 802R, 802T, 802X, and 802XR

Roller Levers

Type Roller Material Roller Diameter [mm (in.)] Roller Width [mm (in.)] Cat. No.
Click to enlarge - 802T-W9A_product_GS Metal 19.05 (0.75) 6.86 (0.27) 802T-W9A
Non-Adj. Cast Lever
0.75 in. Radius
Click to enlarge - 802T-W1_product_GS Nylon 19 (0.75) 7.11 (0.28) 802T-W1
19 (0.75) 25.4 (1.0) 802T-W1H
Dual nylon 19.05 (0.75) 25.4 (1) each 802T-W1HH
Steel 19 (0.75) 6.35 (0.25) 802T-W1A
19.05 (0.75) 19.05 (0.75) 802T-W1N
Non-Adj. Cast Lever
1.5 in. Radius
Roller on Front
Ball bearing 19 (0.75) 5.84 (0.23) 802T-W1B
Beryllium copper (non-sparking) 19.05 (0.75) 7.11 (0.28) 802T-W1J
Nylon 19.05 (0.75) 19.05 (0.75) 802T-W1L
Click to enlarge - 802T-W1E_product_GS Nylon 19.05 (0.75) 7.11 (0.28) 802T-W1E
25.4 (1) 802T-W1D
38.1 (1.5) 7.11 (0.28) 802T-W1G
Non-Adj. Cast Lever
1.5 in. Radius
Roller on Rear
Steel 19.05 (0.75) 6.35 (0.25) 802T-W1F
19.05 (0.75) 802T-W1C
Nylon 19.05 (0.75) 19.05 (0.75) 802T-W1M
Click to enlarge - 802T-W20_product_GS Nylon 19.05 (0.75) 7.11 (0.28) 802T-W20
25.4 (1) 802T-W20D
Steel 6.35 (0.25) 802T-W20A
Non-Adj. Cast Lever
2 in. Radius
Roller on Front
19.05 (0.75) 802T-W20B
Ball bearing 5.84 (0.23) 802T-W20C
Beryllium copper 7.11 (0.28) 802T-W20E
Click to enlarge - 802T-W20J_product_GS Nylon 19.05 (0.75) 7.11 (0.28) 802T-W20J
25.4 (1) 802T-W20K
Steel 6.35 (0.25) 802T-W20L
Non-Adj. Cast Lever
2 in. Radius
Roller on Rear
19.05 (0.75) 802T-W20M
Ball bearing 5.84(0.23) 802T-W20N
Beryllium copper 7.11 (0.28) 802T-W20P
Click to enlarge - 802T-W18_product_GS Nylon 19.05 (0.75) 19.05 (0.75) 802T-W18
Non-Adj. Cast Lever
2-1/8 in.
Radius Roller on Front
25.4 (1) 802T-W18A
  

Type Roller Material Roller Diameter [mm (in.)] Roller Width [mm (in.)] Cat. No.
Click to enlarge - 802T-W25_product_GS Nylon 19.05 (0.75) 7.11 (0.28) 802T-W25
25.4 (1) 802T-W25D
Steel 6.35 (0.25) 802T-W25A
Non-Adj. Steel Lever
2.5 in. Radius
Roller on Front
19.05 (0.75) 802T-W25B
Ball bearing 5.84 (0.23) 802T-W25C
Beryllium copper 7.11 (0.28) 802T-W25E
Click to enlarge - 802T-W25J_product_GS Nylon 19.05 (0.75) 7.11 (0.28) 802T-W25J
25.4 (1) 802T-W25K
Steel 6.35 (0.25) 802T-W25L
Non-Adj. Steel Lever
2.5 in. Radius
Roller on Rear
19.05 (0.75) 802T-W25M
Ball bearing 5.84 (0.23) 802T-W25N
Beryllium copper 7.11 (0.28) 802T-W25P
Click to enlarge - 802T-W30_product_GS Nylon 19.05 (0.75) 7.11 (0.28) 802T-W30
25.4 (1) 802T-W30D
Steel 6.35 (0.25) 802T-W30A
Non-Adj. Steel Lever
3 in. Radius
Roller on Front
19.05 (0.75) 802T-W30B
5.84 (0.23) 802T-W30C
Beryllium copper 7.11 (0.28) 802T-W30E
Click to enlarge - 802T-W30J_product_GS Nylon 19.05 (0.75) 7.11 (0.28) 802T-W30J
25.4 (1) 802T-W30K
Steel 6.35 (0.25) 802T-W30L
Non-Adj. Steel Lever
3 in. Radius
Roller on Rear
19.05 (0.75) 802T-W30M
Ball bearing 5.84 (0.23) 802T-W30N
Beryllium copper 7.11 (0.28) 802T-W30P
Click to enlarge - 802T-W2_product_GS Nylon 19.05 (0.75) 7.11 (0.28) 802T-W2
25.4 (1) 802T-W2D
38.1 (1.5) 7.11 (0.28) 802T-W2A
Steel 19.05 (0.75) 6.35 (0.25) 802T-W2B
Ball bearing 5.8 (0.23) 802T-W2C
Adjustable Lever
1.19…3 in. Radius
Steel 35.56 (1.4) 6.86 (0.27) 802T-W2E
Rubber 38.1 (1.5) 12.7 (0.5) 802T-W2R
Click to enlarge - 802T-W17_product_GS Nylon 19.05 (0.75) 7.11 (0.28) 802T-W17
Metal 802T-W17B
Adjustable Lever
1.19…3 in. Radius
Nylon 38.1 (1.5) 802T-W17A
  

Type Roller Material Roller Diameter [mm (in.)] Roller Width [mm (in.)] Cat. No.
Click to enlarge - 802T-W4_product_GS Nylon; L.H. roller on front; R.H. roller on back 19.05 (0.75) 7.11 (0.28) 802T-W4
Steel; L.H. roller on front; R.H. roller on back 6.35 (0.25) 802T-W4B
Nylon; Both rollers on front 7.11 (0.28) 802T-W4A
Nylon; Both rollers on rear 7.11 (0.28) 802T-NX115
Nylon; Both rollers on front 25.4 (1) 802T-W4F
Fork Lever
1.5 in. Radius
Steel; both rollers on front 6.35 (0.25) 802T-W4C
Nylon; L.H. roller on back; R.H. roller on front 7.11 (0.28) 802T-W4D
Click to enlarge - 802T-W6_product_GS Nylon R.H. adjustable 19.05 (0.75) 7.11 (0.28) 802T-W6
Steel R.H. adjustable 6.35 (0.25) 802T-W6A
Ball bearing R.H. Adj. 5.84 (0.23) 802T-W6B
Nylon L.H. Adj. 7.11 (0.28) 802T-W6C
Micrometer Adjustment Lever§ 
1.5 in. Radius
Steel L.H. Adj. 6.35 (0.25) 802T-W6D
Ball bearing L.H. Adj. 5.84 (0.23) 802T-W6E
Nylon R.H. Adj. 25.4 (1) 802T-W6F
Click to enlarge - 802T-W7_product_GS Nylon 19.05 (0.75) 7.11 (0.28) ♣  802T-W7
Steel 6.35 (0.25) ♣  802T-W7A
Non-Adj. One-way Lever
1.5 in. Radius
Ball bearing 5.84 (0.23) ♣  802T-W7B
Click to enlarge - 802T-W12_product_GS Nylon 19.05 (0.75) 7.11 (0.28) ‡  802T-W12
Steel 6.35 (0.25) ‡  802T-W12A
Non-Adj. Offset Lever
1.44 in. Radius
Roller on Front
Ball bearing 5.84 (0.23) 802T-W12B
Click to enlarge - 802T-W12E_product_GS Nylon 19.05 (0.75) 7.11 (0.28) 802T-W12E
Non-Adj. Offset Lever
1.44 in. Radius
Roller on Rear
Steel 6.35 (0.25) 802T-W12F
  
♣ Do not use on maintained contact limit switches.
‡ When mounted on plug-in devices, the offset lever provides equivalent cam tracking to the nonplug-in devices using Cat. No. 802T-W1 levers.
§ The micrometer adjustment roller lever is designed especially for installations where the position of the roller is a critical factor. This lever has a pivoted roller which can be turned laterally. After clamping the lever to the switch shaft, the position of the roller can be precisely adjusted through an arc of 7.5° on either side of the center or straight-line position.

Roller Levers — Corrosion-Resistant

Type Short Description Roller Diameter [mm (in.)] Roller Width [mm (in.)] Cat. No.
Click to enlarge - 802MC-W1A_product_GS Type 316 stainless steel roller, roller pin and clamp pin
One-piece cast aluminum arm is protected with TUFRAM®♣ 
19 (0.75) 6.35 (0.25) 802MC-W1A
1.5 in. Radius
Roller on Front
Click to enlarge - 802MC-W1G_product_GS Nylon roller
One-piece cast aluminum arm is protected with TUFRAM®♣ 
38.1 (1.5) 7.11 (0.28) 802MC-W1G
1.5 in. Radius
Roller on Rear
Click to enlarge - 802MC-W12_product_GS Nylon roller
One-piece cast aluminum arm is protected with TUFRAM®♣ 
19.05 (0.75) 7.11 (0.28) 802MC-W12
Non-Adj. Offset Lever
1.44 in. Radius
Roller on Front
Click to enlarge - 802MC-W2B_product_GS Type 316 stainless steel roller, roller pin, clamp pin and adjustable lever arm
Block is cast aluminum protected with TUFRAM®♣ 
19 (0.75) 6.35 (0.25) 802MC-W2B
Adjustable Lever
1.19…3 in. Radius
  
♣ TUFRAM is a synergistic coating which combines the advantages of anodizing with a controlled infusion of PTFE for added corrosion resistance.

Rod Levers

Type Material Rod Length [mm (in.)] Rod Diameter [mm (in.)] Cat. No.
Click to enlarge - 802T-W3_product_GS Stainless steel rod 127 (5) 3.3 (0.13) ∆  802T-W3
216 (8.5) ∆  802T-W3B
304.8 (12) 802T-NX50
Click to enlarge - 802T-W3A_product_GS Stainless steel rod 292.1 (11.5) 3.3 (0.13) 802T-W3A
2 (0.08) ‡  802T-W3F
355.6 (14) 3.3 (0.13) 802T-NX159
Click to enlarge - 802T-W3C_product_GS Nylon rod 304.8 (12) 6.4 (0.25) 802T-W3C
§  802T-NX142
Click to enlarge - 802T-W5_product_GS Stainless steel rod 127 (5) 1.5 (0.06) ∆  802T-W5
Click to enlarge - 802T-W8_product_GS 127 (5) one-way ♣  802T-W8
Click to enlarge - 802T-W14_product_GS Nylatron looped rod 152.4 (6) long, 50.8 (2) wide loop 4.6 (0.18) 802T-W14
Click to enlarge - 802T-NX119_product_GS 228.6 (9) long, 50.8 (2) wide loop 802T-NX119
Click to enlarge - 802T-W16_product_GS Steel rod 228.6 (9) 6.4 (0.25) 802T-W16
Nylon rod 802T-W16A
  
∆ Recommended for use with low operating torque switches.
‡ Not for use with Cat. No. 802M-NPY5 or Cat. No. 802M-ASY5 type switches.
§ Recommended for high impact applications.
♣ Do not use on maintained contact limit switches.

Rod Levers — Corrosion-Resistant

Type Short Description Rod Length [mm (in.)] Rod Diameter [mm (in.)] Cat. No.
Click to enlarge - 802MC-W3_product_GS Type 316 stainless steel rod
Block is cast aluminum protected with TUFRAM®∆ 
127 (5) 3.3 (0.13) 802MC-W3
Click to enlarge - 802MC-W3A_product_GS Type 316 stainless steel rod
Block is cast aluminum protected with TUFRAM®∆ 
292.1 (11.5) 2.03 (0.08) 802MC-W3A
Click to enlarge - 802MC-W3C_product_GS Nylon Rod
Block is cast aluminum protected with TUFRAM®∆ 
304.8 (12) 6.35 (0.25) 802MC-W3C
Click to enlarge - WF25507 Nylon Rod Only 6.35 (0.25) WF25507
  
∆ TUFRAM is a synergistic coating which combines the advantages of anodizing with a controlled infusion of PTFE for added corrosion resistance.

Dimensions are shown in mm (in.). Dimensions are not intended to be used for installation purposes.


Click to enlarge - 802T-W1C_W1E_W1F_dims   Click to enlarge - 802T-W1D_dims   Click to enlarge - 802T-W1G_dims
Cat. No. 802T-W1C (Dim. A = 0.81 in.);
Cat. Nos. 802T-W1E and 802T-W1F (Dim. A = 1.03 in.)
Shipping Wt. W1C: 57 g (2 oz); W1E: 28.3 g (1 oz.); W1F: 43 g (1.5 oz)
Cat. No. 802T-W1D
Shipping Wt. 43 g (1.5 oz)
Cat. No. 802T-W1G
Shipping Wt. 28 g (1 oz)

Click to enlarge - 802T-W1H_dims   Click to enlarge - 802T-W2A_dims   Click to enlarge - 802T-W2_W2B_W2C_dims
Cat. No. 802T-W1H
Shipping Wt. 43 g (1.5 oz)
Cat. No. 802T-W2A
Shipping Wt. 57 g (2 oz)
Cat. Nos. 802T-W2 & 802T-W2B (Dim. A = 1.78 in.);
Cat. No. 802T-W2C (Dim. A = 1.81 in.)
Shipping Wt. 57 g (2 oz)

Click to enlarge - 802T-W2D_dims   Click to enlarge - 802T-W3_dims   Click to enlarge - 802T-W3A_W3F_dims
Cat. No. 802T-W2D
Shipping Wt. 57 g (2 oz)
Cat. No. 802T-W3
Shipping Wt. 43 g (1.5 oz)
Cat. Nos. 802T-W3A & 802T-W3F
Shipping Wt. 57 g (2 oz)

Click to enlarge - 802T-W3B_W3F_dims   Click to enlarge - 802T-W3C_dims   Click to enlarge - 802T-W4_W4D_dims
Cat. Nos. 802T-W3B & 802T-W3F
Shipping Wt. 43 g (1.5 oz)
Cat. No. 802T-W3C
Shipping Wt. 57 g (2 oz)
Cat. Nos. 802T-W4 & 802T-W4D
Shipping Wt. 43 g (1.5 oz)
Cat. No. 802T-W4B
Shipping Wt. 57 g (2 oz)

Click to enlarge - 802T-W4A_W4C_dims   Click to enlarge - 802T-W4F_dims   Click to enlarge - 802T-W5_dims
Cat. Nos. 802T-W4A & 802T-W4C
Shipping Wt. 57 g (2 oz)
Cat. No. 802T-W4F
Shipping Wt. 57 g (2 oz)
Cat. No. 802T-W5
Shipping Wt. 28 g (1 oz)

Click to enlarge - 802T-W6_W6A_W6B_W6E_dims   Click to enlarge - 802T-W6F_dims   Click to enlarge - 802T-W7_W7A_W7B_dims
Cat. Nos. 802T-W6, 802T-W6A, 802T-W6B, and 802T-W6E
Shipping Wt. 57 g (2 oz)
Cat. No. 802T-W6F
Shipping Wt. 57 g (2 oz)
Cat. Nos. 802T-W7, 802T-W7A, and 802T-W7B
Shipping Wt. 57 g (2 oz)

Click to enlarge - 802T-W8_dims   Click to enlarge - 802T-W9_dims   Click to enlarge - 802T-W12_W12A_W6B_W6E_dims
Cat. No. 802T-W8
Shipping Wt. 43 g (1.5 oz)
Cat. No. 802T-W9
Shipping Wt. 28 g (1 oz)
Cat. No. 802T-W12
Shipping Wt. 28.3 g (1 oz)
Cat. Nos. 802T-W12A, 802T-W6B, and 802T-W6E
Shipping Wt. 43 g (1.5 oz)

Click to enlarge - 802T-W14_dims   Click to enlarge - 802T-W16_W16A_dims   Click to enlarge - 802T-W20_dims   Click to enlarge - 802T-W20J_dims
Cat. No. 802T-W14
Shipping Wt. 43 g (1.5 oz)
Cat. Nos. 802T-W16 & 802T-W16A Cat. No. 802T-W20
Shipping Wt. 57 g (2 oz)
Cat. No. 802T-W20J
Shipping Wt. 57 g (2 oz)