Manual Motor Starters 140A
Manual Motor Starters 140A
|
- Current Range 0.1…16 A
- Motor Protection
- For Economical Motor Starters
- Usable as Main Switch
- Temperature Compensated
| Rated Operational Current (Ie) | Motor Current Adjustment Range | Switching of 3-Phase AC Motors AC-2, AC-3 @ 400/415V (50 Hz) ⋆ |
Cat. No. | |
| [A] | [A] | [kW] | Icu = Ics [kA] | |
| 0.16 | 0.1…0.16 | 0.02 | 65 | 140A-C2A-A16 |
| 0.25 | 0.16…0.25 | 0.06 | 65 | 140A-C2A-A25 |
| 0.4 | 0.25…0.4 | 0.09 | 65 | 140A-C2A-A40 |
| 0.63 | 0.4…0.63 | 0.12/0.18 | 65 | 140A-C2A-A63 |
| 1 | 0.63…1.0 | 0.25 | 65 | 140A-C2A-B10 |
| 1.6 | 1.0…1.6 | 0.37/0.55 | 65 | 140A-C2A-B16 |
| 2.5 | 1.6…2.5 | 0.75 | 50 | 140A-C2A-B25 |
| 4 | 2.5…4.0 | 1.1/1.5 | 10 | 140A-C2A-B40 |
| 6.3 | 4.0…6.3 | 2.2 | 10 | 140A-C2A-B63 |
| 10 | 6.3…10 | 3.0/4.0 | 8 | 140A-C2A-C10 |
| 16 | 10…16 | 5.5/7.5 | 6 | 140A-C2A-C16 |
| ⋆ Power ratings: Preferred values according to IEC 60072-1 | ||||
| Description | Term. No. |
|
|
For Use With | Cat. No. | |
| N.O. | N.C. | |||||
|
Auxiliary Contact for Flush Mounting 1-pole No additional space required |
13-14 | 1 | 0 | 140A | 140A-C-AEA10 |
| 33-34 | 1 | 0 | 140A-C-AEA210 | |||
| 11-12 | 0 | 1 | 140A-C-AEA01 | |||
| 31-32 | 0 | 1 | 140A-C-AEA201 | |||
|
Auxiliary Contact for Left-side Mounting 2-pole Adds 9 mm to the width of the Manual Motor Starter Use compact bus bars with 54 mm spacing |
13-14 23-24 |
2 | 0 | 140A | 140A-C-ASA20 |
| 13-14 21-22 |
1 | 1 | 140A-C-ASA11 | |||
| 11-12 21-22 |
0 | 2 | 140A-C-ASA02 | |||
| Description | For Use With | Cat. No. | ||
|
Undervoltage Trip Release For right-side mounting Adds 18 mm to the width of the Manual Motor Starter |
24V 50 Hz | 140A | 140A-C-UXK |
| 220…230V 50 Hz | 140A-C-UXF | |||
| 400V 50 Hz / 460V 60 Hz | 140A-C-UXN | |||
| 415V 50 Hz / 480V 60 Hz | 140A-C-UXB | |||
| 110V 50 Hz / 120V 60 Hz | 140A-C-UXD | |||
| 110V 50 / 60 Hz | 140A-C-UXKD | |||
|
Shunt Trip Release For right-side mounting Adds 18 mm to the width of the Manual Motor Starter |
24V 50 Hz | 140A | 140A-C-SXK |
| 220…230V 50 Hz | 140A-C-SXF | |||
| 400V 50 Hz / 460V 60 Hz | 140A-C-SXN | |||
| 415V 50 Hz / 480V 60 Hz | 140A-C-SXB | |||
| 110V 50 Hz / 120V 60 Hz | 140A-C-SXD | |||
| 110V 50 / 60 Hz | 140A-C-SXKD | |||
|
Compact Bus Bars 45 mm spacing for manual motor starters with flush-mounted auxiliary contact blocks |
2 x 3 Terminal links | 140A | 140A-C-W452 |
| 3 x 3 Terminal links | 140A-C-W453 | |||
| 4 x 3 Terminal links | 140A-C-W454 | |||
| 5 x 3 Terminal links | 140A-C-W455 | |||
| Compact Bus Bars 54 mm spacing for manual motor starters with side-mounted auxiliary contact blocks |
2 x 3 Terminal links | 140A | 140A-C-W542 | |
| 3 x 3 Terminal links | 140A-C-W543 | |||
| 4 x 3 Terminal links | 140A-C-W544 | |||
| 5 x 3 Terminal links | 140A-C-W545 | |||
|
Bus Bar Feeder Terminal Supply of compact busbars Increases wiring capacity |
140A-C-W | 140A-C-WT | |
|
Blank Space Cover For covering unused terminal links |
140A-C-W | 140A-C-WS | |
|
Connecting Module Contactor and Manual Motor Starter MUST BE mounted separately on (2) DIN Rails Electrical interconnection between 140A and 100-C09…-C23 contactor (with AC coils) |
140A | 140A-C-PNC23 | |
| Description | For Use With | Cat. No. | |||
|
Enclosures for Surface Mounting With centre marks for two indicator lights Includes protective earth and neutral wire terminals |
Protection Class: IP41 |
140A | 140A-C-EA41 | |
| Protection Class: IP55 (with seal and protective membrane) |
140A | 140A-C-EA55 | |||
|
Enclosures for Flush Mounting Includes protective earth and neutral wire terminals |
Protection Class: IP41 |
140A | 140A-C-EE41 | |
| Protection Class: IP55 (with seal and protective membrane) |
140A | 140A-C-EE55 | |||
|
Emergency-Stop Push Button Set For use with enclosures Twist to release |
140A-C-E… | 140A-C-MT | ||
| Emergency-Stop Push Button Set For use with enclosures Key release |
140A-C-E… | 140A-C-MK | |||
|
Button Membrane For IP55 enclosures Replacement part with four screws (mounting frame included) |
140A-C-EA55 140A-C-EE55 |
140A-C-N55 | ||
|
Pilot Lights Length of connection leads 180 mm, includes lamp, protection class IP54. |
Green | 120V | 198E-A…, 198E-C…, 140A-C-E… | 140-LG120 |
| 240V | 140-LG240 | ||||
| 400V | 140-LG400 | ||||
| Red | 120V | 198E-A…, 198E-C…, 140A-C-E… | 140-LR120 | ||
| 240V | 140-LR240 | ||||
| 400V | 140-LR400 | ||||
| White | 120V | 198E-A…, 198E-C…, 140A-C-E… | 140-LW120 | ||
| 240V | 140-LW240 | ||||
| 400V | 140-LW400 | ||||
|
Locking Arrangement Suitable for enclosures 140A-C-E… For 1…3 padlocks with ø 4…8 mm |
140A-C-E… | 140A-C-M3E | ||
|
Locking Arrangement For locking ON-button of the Manual Motor Starter For 1…3 padlocks with ø 4…6 mm |
140A | 140A-C-M3 | ||
|
Screw Adapter Hat (DIN) Rail 35 x 7.5 mm, length 44 mm |
140A | 140A-C-N12 | ||
See Publication A117 for complete product information.