Electronic Overload Relays 193-ED, 193-EE

Electronic Overload Relays E1 Plus - 193-ED, 193-EE

Click to enlarge - 193_ED_EE_E1_plus_relay_4c Click to enlarge - 193-ED1CP_left_4c
Standard version Pass-through version


Description Mounts to Contactor Adjustment Range [A] Cat. No.
Three-Phase Devices 193-ED
  • 0.1…45 A Current Range

  • Fixed Trip Class 10

  • Manual Reset
    		•  100-C09…100-C23 0.1…0.5 193-ED1AB
    0.2…1.0 193-ED1BB
    1.0…5.0 193-ED1CB
    3.2…16 193-ED1DB
    5.4…27 193-ED1EB
    100-C30…100-C43 5.4…27 193-ED1ED
    9…45 193-ED1FD
  • 1…27 A Current Range

  • Selectable Trip Class (10, 15, 20 or 30)

  • Selectable Manual/Auto-Manual Reset
    		•  Integrated panel/DIN Rail mount and pass-thru wiring 1.0…5.0 193-ED1CP
    3.2…16 193-ED1DP
    5.4…27 193-ED1EP
    Three-Phase Devices 193-EE
  • 0.1…800 A Current Range

  • Selectable Trip Class (10, 15, 20 or 30)

  • Selectable Manual/Auto-Manual Reset
    		•  100-C09…100-C23 0.1…0.5 193-EEAB
    0.2…1.0 193-EEBB
    1.0…5.0 193-EECB
    3.2…16 193-EEDB
    5.4…27 193-EEEB
    100-C30…100-C43 5.4…27 193-EEED
    9…45 193-EEFD
    100-C60…100-C97 5.4…27 193-EEEE
    9…45 193-EEFE
    18…90 193-EEGE
    60…120 193-EEVE
    100-D115…100-D180 60…120 ⋆  193-EEVF
    30…150 ⋆  193-EEHF
    40…200 ⋆  193-EEJF
    100-D210…100-D420 40…200 ⋆  193-EEJG
    60…300 ⋆  193-EEKG
    100-D210…100-D420 100…500 ⋆  193-EELG
    100-D630…100-D860 120…600 ⋆  193-EEMH
    100-D630…100-D860 160…800 ⋆  193-EENH
  • 1…27 A Current Range

  • Selectable Trip Class (10, 15, 20 or 30)

  • Selectable Manual/Auto-Manual Reset
    		•  Integrated panel/DIN Rail mount and pass-thru wiring 1.0…5.0 193-EECP
    3.2…16 193-EEDP
    5.4…27 193-EEEP
      
    ⋆ Rated operating voltage IEC: 1000V AC

    Description CT Ratio Adjustment Range [A] Cat. No.
    Three-Phase Devices 193-EE_Z for use with external CT's (193-CBCT_)
  • 30…800 A Current Range

  • Selectable Trip Class (10, 15, 20 or 30)

  • Selectable Manual/Auto-Manual Reset

  • Require one external CT per phase (not supplied)

    •         (Rating for protecting relaying,
            Secondary current 5 A
            Secondary load 0.1 VA (overload relay only)
            Accuracy >= 2 % over operating range)
  • Require the use of the panel adapter 193-EPB
    		•  150:5 30…150 193-EEHZ
    200:5 40…200 193-EEJZ
    300:5 60…300 193-EEKZ
    400:5 80…400 193-EEWZ
    500:5 100…500 193-EELZ
    600:5 120…600 193-EEMZ
    800:5 160…800 193-EENZ
      

    Description Mounts to Contactor Adjustment Range [A] Cat. No.
    Single-Phase Devices 193-EE
  • 1…90 A Current Range

  • Selectable Trip Class (10, 15, 20 or 30)

  • Selectable Manual/Auto-Manual Reset
    		•  100-C09…100-C23 1.0…5.0 193S-EEPB
    3.2…16 193S-EERB
    5.4…27 193S-EESB
    100-C30…100-C43 9…45 193S-EETD
    100-C60…100-C97 18…90 193S-EEUE
  • 1…27 A Current Range

  • Selectable Trip Class (10, 15, 20 or 30)

  • Selectable Manual/Auto-Manual Reset
    		•  Integrated panel/DIN Rail mount and pass-thru wiring 1.0…5.0 193S-EEPP
    3.2…16 193S-EERP
    5.4…27 193S-EESP
      

    Accessories for Overload Relays

      Description For Use With PQ Cat. No.
    Click to enlarge - ab_1 Adpt_006538 DIN Rail/Panel Adapter
    For separate mounting – can be mounted to top-hat rail EN 50 022-35     		193-ED1_B, 193-EE_B, 193S-EE_B, 193-EE_Z 1 193-EPB
    193-ED1_D, 193-EE_D, 193S-EE_D 193-EPD
    193-EE_E, 193S-EE_E 193-EPE
    Click to enlarge - ab_4 timer cover_006550 Current Adjustment Shield
    Prevents inadvertent adjustment of the current setting.
    Must be ordered in multiples of package quantities.     		193-ED (all),
    193-EE (all)     		10 193-BC8
    Click to enlarge - ab_3 reset cover_006549 External Reset Adapter
    For enclosed, through-the-door reset applications. Use with external reset button.     		193-ED (all)
    193-EE_B,
    193-EE_D,
    193-EE_E,
    193-EE_P,
    193-EE_Z     		1 193-ERA
    Click to enlarge - 800FP-R611_whiteR_4c External Reset Button
    For enclosed, through-the-door reset applications. Metal construction, IP66, non-illuminated. Refer to the 800F selection information for additional types.     		All 1 800FM-R611
    Click to enlarge - 800F_reset_rod_4c Reset Rod
    Length 142 mm, adjustable range 141…159 mm     		All 1 800F-ATR08
      
    PQ = Package Quantity

      Description For Use With Cat. No.
    Click to enlarge - devicenet_193EDN_cmyk E1 Plus DeviceNet and Protection Module
    Communicates motor diagnostic data via DeviceNet, includes additional I/O, and provides enhanced motor protection options.‡      		193-EE (all),
    193S-EE (all)     		193-EDN
    Click to enlarge - 193_ETN_A_right E1 Plus EtherNet/IP and Protection Module
    Communicates motor diagnostic data via EtherNet/IP, includes additional I/O, and provides enhanced motor protection options.‡      		193-ETN
    Click to enlarge - 193-EPRB_right_4c E1 Plus PROFIBUS and Protection Module
    Communicates motor diagnostic data via PROFIBUS, includes additional I/O, and provides enhanced motor protection options.‡      		193-EPRB
    Click to enlarge - 193_EGJ_right E1 Plus Ground Fault/Jam Module
    Provides adjustable 20 mA…5 A ground fault and fixed jam protection. The module also provides an input to allow remote reset of a trip.⋆ ‡      		193-EGJ
    Click to enlarge - 193_EGF_right E1 Plus Ground Fault Module
    Provides adjustable 20 mA…5 A ground fault protection. The module also provides an input to allow remote reset of a trip.⋆ ‡      		193-EGF
    Click to enlarge - 193_EJM_4c E1 Plus Jam Protection Module
    Provides Jam protection with adjustable trip level and trip delay setting. The module also provides an input to allow remote reset of a trip.‡      		193-EJM
    Click to enlarge - 193_EPT_right E1 Plus PTC Module
    Provides terminals for connection up to six PTC thermistor sensors. Sensors react to actual temperature and therefore provide enhanced motor protection. Module also provides an input to allow remote reset of a trip.‡      		193-EPT
    Click to enlarge - 193_ERR_right E1 Plus Remote Reset Module
    Provides an input to allow remote reset of a trip.‡      		193-ERR
    Click to enlarge - 193_ERID_AB_right E1 Plus Remote Indicator Display
    Displays the status of an E1 Plus from the front of a panel and features a reset button. Mounts in a standard 22 mm push button cutout.‡      		193-EGF,
    193-EJM,
    193-EGJ,
    193-PTC,
    193-ERR (Ser. B or later)     		193-ERID
      Replacement Connectors for Cat. No. 193-ERID 193-ERID 193-NCRID
      
    ⋆ Requires external ground fault sensor, Cat. No. 193-CBCT_.
    ‡ Only one module may be added.

      Description For Use With Cat. No.
    Click to enlarge - 193_CBCT2_right Core Balanced Ground Fault Sensor
  • Required when using either an E1 Plus Ground Fault Protection or Ground Fault/Jam Module

  • Required for ground fault protection with the Cat. No. 193-EC3 overload relay
    		•  20 mm (0.79 in.) 100-C09…100-C37 193-CBCT1
    40 mm (1.57 in.) 100-C09…100-C97 193-CBCT2
    63 mm (2.5 in.) 100-C09…100-C97, 100-D115…100-D180 193-CBCT3
    82 mm (3.25 in.) 100-C09…100-C97, 100-D115…100-D420 193-CBCT4
    Click to enlarge - 193DNCT_10_4c DeviceNet Configuration Terminal
    Used to interface with objects on a DeviceNet network. Includes 1 m communications cable (193-CB1).     		DeviceNet 193-DNCT
    1 meter communication cable, color-coded bare leads 193-DNCT 193-CB1
    1 meter communication cable, microconnector (male) 193-CM1
    Panel Mount Adapter/Door Mount Bezel Kit 193-DNCT-BZ1
    Click to enlarge - Reset_right-4c Remote Reset Solenoid 24V AC, 50/60 Hz E1 Plus (Series C and later) 193-EMRJ
    110/120V AC, 50/60 Hz 193-EMRD
    220/240V AC, 50/60 Hz 193-EMRA
    24V DC 193-EMRZ24
    48V DC 193-EMRZ48
    115V DC 193-EMRZ01
      

      Description For Use With Cat. No.
    Click to enlarge - 100-DTB_GS Terminal Lugs
  • Set of two

  • Protection class IP2X per IEC 60529 and DIN 40 050
    		•  100-D115, 100-D140, 100-D180, 100-D115E…D180E, 193-EC_F, 193-EE_F 100-DTB180
    100-D210...100-D420, 193-EC_G, 193-EF2C, 193-EE_G 100-DTB420
    Click to enlarge - 100D-93-5 Terminal Covers
  • Protection class IP20 per IEC 60529 and DIN 40 050

  • For direct-on-line, reversing, two-speed, and wye-delta/star-delta assemblies
    		•  100-D115…100-D180, 193-EC_F, 193-EE_F 100-DTC180
    100-D210...100-D420, 193-EC_G, 193-EE_G 100-DTC420
    100-D630…100-D860, 193-EC_H, 193-EE_H 100-DTC860
    100-D630…100-D860, 193-EC_H, 193-EE_H 100-DTCS860
    Click to enlarge - 100D-93-2 Terminal Lugs (UL/CSA), Copper Frame
    Set of three     		100-D115, 100-D140, 100-D180, 193-EC_F, 193-EE_F 100-DL180
    100-D210…100-D420, 193-EC_G, 193-EE_G 100-DL420
    100-D630, 100-D860, 193-EC_H, 193-EE_H 100-DL630
    100-D630, 100-D860, 193-EC_H, 193-EE_H 100-DL860
      

    Note:For labeling materials, see Marking Systems.