Modular Protection System 825-P

0.5…5000 A current range
Comprehensive protection functions
Suitable for low- and medium-voltage applications
Built-in keypad and backlit 2-Line LCD
Modular design with pluggable options
- Voltage input card
- Expansion I/O cards
- Communications cards, including DeviceNet
- RTD scanner module
Test / Reset button
Status LEDs
3 output relays
2 configurable inputs

	Description			Cat. No.
	Basic Unit Note: The minimum requirements for a complete basic system are one basic unit and one converter module.	120…240V AC/DC		825-PD
	User Manual Ships separate from Basic Unit. Please consult your local sales office.	825-UM004…
	Converter Module	0.5…2.5 A		825-MCM2
		2.5…20 A		825-MCM20
		20…180 A		825-MCM180
		160…630 A		825-MCM630N
	Core Balance Ground Fault Sensor	100:1		825-CBCT
	RTD Scanner Module 12 RTD input channels with individual programming for 10 W copper, 100 W nickel, 120 W nickel, or 100 W platinum. Fiber optic connection to Basic Unit. Class I, Division 2, Group T48.. Use an up to 500m long Simplex 62.5/125mm fiber optic cable ST/ST (customer suplied).	120 / 240V AC		825-PR12D
	Voltage Input Card Monitoring of V_A, V_B, V_C, and V_N	300V AC Line to Neutral Max.	⋆	825-PVS
	Expansion I/O Card (3) Inputs (4) Output relays (1) 4…20 mA analog output	120V AC Rated Inputs	⋆	825-PIOD
		24V DC Rated Inputs	⋆	825-PIOR
	DeviceNet Communication Card DeviceLogix technology, Node address selection switches, ODVA conformance tested.		⋆	825-PDN
	DeviceNet User Manual Please consult your local sales office.	825-UM005…
	Modbus RTU Communication Card	—	⋆	825-PMB

⋆ Please consult your local sales office for factory configurated devices with option cards.

Description		Cat. No.
M8 connections Set of three 4 x 16 x 102 mm (1/8 x 5/8 x 4-1/64 in.) (125 A max.) Universally applicable Weight: 230 g		825-MVM
M8 connections Set of three 4 x 20 x 117 mm (1/8 x 25/32 x 4-39/64 in.) (180 A max.) Universally applicable		825-MVM2
M6 lower connections Set of three For mounting on Bul. 100-D105 and 100-D110 contactors with conventional coil		825-MVS
M8 lower connections Set of three For mounting on Bul. 100-D140, 100-D180 conventional and Bul. 100-D105E…100-D180E contactors with electronic coil		825-MVS2
Terminal Shields Set of two Protection class IP10 per IEC 60529 and DIN 40 050 For direct-on-line, reversing, two-speed, and wye-delta/star-delta assemblies	100-D115	100-DTS110
	100-D115…100-D180, 193-FE	100-DTS180
	100-D210...100-D420, 193-FE	100-DTS420
Terminal Lugs Set of two Protection class IP2X per IEC 60529 and DIN 40 050	100-D115	100-DTB110
	100-D115, 100-D140, 100-D180, 100-D115E…D180E, 193-EC_F, 193-EE_F	100-DTB180
	100-D210...100-D420, 193-EC_G, 193-EF2C, 193-EE_G	100-DTB420
Thermal Utilization Meter	For display of percent thermal capacity utilized Requires the use of an Expansion I/O Card	825-MTUM
Connection Cable (Replacement) Bul. 825-P to Bul. 825-MCM Connection		825-MCA