| Power Supply Voltage
|
Max. No. of Alarms Supported
|
Control Output T
|
Supports Heater Burnout (Open) and Heater Short-Circuit Alarm
|
Cat. No.
|
| Input Type: Thermocouple or RTD
|
100…
240V AC
|
2
|
Relay
|
Yes ¬
|
900-TC16RGTZ25
|
| Triac
|
Yes ¬
|
900-TC16YGTZ25
|
| Voltage (for driving SSR)
|
Yes ¬
|
900-TC16VGTZ25
|
| 0...20 or 4...20 mA Analog Output
|
No
|
900-TC16ACGTZ25
|
| 24V AC/DC
|
2
|
Relay
|
Yes ¬
|
900-TC16RGTU25
|
| Voltage (for driving SSR)
|
Yes ¬
|
900-TC16VGTU25
|
| 0...20 or 4...20 mA Analog Output
|
No
|
900-TC16ACGTU25
|
| Input Type: Analog Current & Voltage 0...20 and 4...20 mA 0...5, 1...5, and 0...10V DC
|
100…
240V AC
|
2
|
Relay
|
Yes ¬
|
900-TC16RABZ25
|
| Triac
|
Yes ¬
|
900-TC16YABZ25
|
| Voltage (for driving SSR)
|
Yes ¬
|
900-TC16VABZ25
|
| 0...20 or 4...20 mA Analog Output
|
No
|
900-TC16ACABZ25
|
| 24V AC/DC
|
Relay
|
Yes ¬
|
900-TC16RABU25
|
| Voltage (for driving SSR)
|
Yes ¬
|
900-TC16VABU25
|
| 0...20 or 4...20 mA Analog Output
|
No
|
900-TC16ACABU25
|
|
|
| A current transformer (CT) is not provided with the unit.
|
| When the heating and cooling function or the heater burnout alarm is used, one of the relay alarm outputs can be used as the heating or cooling output or heater burnout alarm.
|
| ¬ To implement the single-phase or three-phase heater burnout and heater short alarm function, an option module must be inserted into the 900-TC16 controller. For a list of 900-TC16 option modules, refer to the Option Units table. The heater burnout and heater short alarm is available by mounting the appropriate option module into any 900-TC16 controller that supports (yes) the heater burnout (open) or heater short-circuit feature.
|
| T The Bulletin 900-TC16 can have a second ON/OFF control output (SSR) by adding an option unit to the controller. Refer to Option Units table.
|
