Catalogs > Essentials Catalog (Europe) > Logic > Temperature Controllers
Temperature Controllers
| Introduction |  |
Temperature Controllers 900-TC8 | |
Temperature Controllers 900-TC16 | |
Temperature Controllers 900-TC32 | |
Option Units | |
Accessories | |
Current Transformer (Use with Bulletins 900-TC8 and 900-TC16 Only for Heater Burnout)
| For Use With | Hole Diameter ¬ | Cat. No. |
| 900-TC8, 900-TC16 | 5.8 dia. | 900-CT1 |
| 12.0 dia. | 900-CT2 | |
| ¬ The hole diameter is the only functional difference between the Cat. No. 900-CT1 and the Cat. No. 900-CT2. Current output to controller is the same. | ||
900BuilderLite™ Personal Computer Configuration Software
(For Enhanced Functionality of 900-TC8 and 900-TC16 Controllers)
Free software. Allows online configuration and monitoring (direct or network) plus program upload/download capability to/from PC disk media for any enhanced 900-TC8 or 900-TC16 controller.
Note: To obtain the free software, go to http://www.ab.com and use the A-Z Product Directory under "Resources" to locate the Temperature Controller home page. With the Bulletin 900-TC Single-Loop website displayed, go to the "Get Software" selection in the upper right and click on 900BuilderLite. Follow the download instructions.
| Accessory | Cat. No. |
| Free configuration software for Bulletin 900-TC8 and 900-TC16 controllers. | 900-BLDLTSW1 |
900Builder Personal Computer Configuration Software
Allows graphical configuration and monitoring of controller parameters with data-logging and trending, plus program upload/download capability for any Bulletin 900-TCx controller.
| Accessory | Cat. No. |
| 900Builder™ Personal Computer Configuration Software for Bulletin 900-TC32 Temperature Controllers (available in CD format only) | 900-BLDSW1 |
USB Direct Communication Cable
This cable allows direct 1-to-1 (no network capability) communication between a PC USB port and the serial port of a Bulletin 900-TC16 or a 900-TC8 controller. No communication option unit is required. The cable can be used with the 900BuilderLite™ software to modify parameters, monitor controller operation, and upload or download parameters to/from PC disk media.
| Accessory | Cat. No. |
| USB-Serial Conversion Cable | 900-CPOEM1 |
Interface Converter (RS-232/USB to RS-485) Model
Converts personal computer RS-232 or USB (Ser. B or later) communications to RS-485. Use for interface with up to 31 units of controllers type 900-TC8 or 900-TC16 with communication option board or 900-TC32Cxx.
| Bulletin | Size | Power Supply Voltage | Cat. No. |
| 900-CONV | 30 mm (W) x 80 mm (H) x 78 mm (D) | 100…240V AC | 900-CONVZ25 |
| 24V AC/DC | 900-CONVU25 | ||
RS-232 Interface Cable
Allows connection between a 900-TC8 with a 900-TC8232 option unit and a PC using 900Builder software or PC with 900Builder and a 900-CONV RS232-to-RS485 converter.
| Accessory | Cat. No. |
| RS-232 cable with 9-pin female D shell and 3 flying leads (3 m) | 900-CP1X |