General Purpose Relays 700-HA

Click to enlarge - 700_HA_relay_4c


General Purpose Relays 700-HA


Product Selection

Bulletin 700-HA Tube Base Relay with PIN Terminals (Single Contact) —
Mechanical ON/OFF Indicator included


Description Wiring Diagrams Contact Rating Coil Voltage Cat. No. ‡ § ♣ 
DPDT
2-pole
2 Form C
Single AgNi Contact
Click to enlarge - 700HA-63-3 10 A
B300
24V AC 700-HA32A24
230V AC 700-HA32A03
240V AC 700-HA32A2
24V DC 700-HA32Z24
110V DC 700-HA32Z1
Sockets 700-HN100, -HN204 220V DC 700-HA32Z2
3PDT
3-pole
3 Form C
Single AgNi Contact
Click to enlarge - 700HA-63-6 10 A
B300
24V AC 700-HA33A24
230V AC 700-HA33A03
240V AC 700-HA33A2
24V DC 700-HA33Z24
110V DC 700-HA33Z1
Sockets 700-HN101, -HN205 220V DC 700-HA33Z2
  
‡ LED option: Add suffix (-4) to the selected Bulletin 700-HA relay cat. no.,
except for the 240V AC units, add (-4L).
§ Push-to-test, manual override, and LED option: Add suffix (-3-4) to the selected Bulletin 700-HA relay cat. no., except for the 240V AC units, add (-3-4L).
♣ Push-to-test and manual override option: Add suffix (-3) to the selected Bulletin 700-HA relay.

Accessories for 700-HA

  Description PQ Cat. No.
Click to enlarge - 700-HN101_L Screw Terminal Tube Base Socket — Panel or DIN Rail Mounting; Guarded Terminal Construction. 8-Pin for use with DPDT Bulletin 700-HA Relays, -HX Timing Relays, -HT (On-Delay) and -HRM, -HRC and -HV (Repeat Cycle) Timing Relays. Order ten or multiples of ten 10 700-HN100
Screw Terminal Tube Base Sockets — Panel or DIN Rail Mounting; Guarded Terminal Construction. 11-pin for use with 3PDT 700-HA relays. 10 700-HN101
Click to enlarge - 700_HN205 8-Pin Socket — Can Be Used With or Without Timing Attachment or Surge Suppressor
Screw Terminal Tube Base Sockets — panel or DIN Rail mounting. Guarded terminal construction. Used with DPDT Bulletin 700-HA Relays. Order must be for 10 sockets or multiples of 10.
10 700-HN204
11-Pin Socket — Can Be Used With or Without Timing Module or Surge Suppressor. Screw Terminal Tube Base Sockets — panel or DIN Rail mounting. Guarded terminal construction.
Used with 3PDT Bulletin 700-HA relays.
10 700-HN205
  
PQ = Package Quantity

  Description PQ Cat. No.
Click to enlarge - 700-AV1R (Right)_sm Diode Surge Suppressor ⋆ 
Voltage Range: 6…220V DC used with 700-HN204/205 socket
10 700-ADR
Diode with LED Surge Suppressor ⋆ 
Voltage Range: 6…24V DC used with 700-HN204/205 socket
10 700-ADL1R
Varistor with LED Surge Suppressor ⋆ 
Voltage Range: 110…240V AC used with 700-HN204/205 socket
10 700-AV3R
RC Surge Suppressor ⋆ 
Voltage Range: 6…24V AC/DC used with 700-HN204/205 socket
10 700-AR1
RC Surge Suppressor ⋆ 
Voltage Range: 110…240V AC/DC used with 700-HN204/205 socket
10 700-AR2
Click to enlarge - 700-AT3 (Right)_sm Timing Module
On-Delay or One-Shot selectable voltage range: 12…24V AC/DC used with 700-HN204 and 700-HN205 sockets.
On-Delay 1 700-AT3
Click to enlarge - 700HC-86-3
One-Shot
Click to enlarge - 700HC-86-4
Click to enlarge - 700_HT3 Multi-Function Multi-Range Time Module ⋆ 
  • Voltage range 12…240V AC 50/60 Hz and 12…240V DC, with a voltage variation of 85…110%. Repeat accuracy of ±1%. Reset time <50 ms.

  • Choice of 8 functions

  • Choice of 8 time ranges 0.1…240 h

  • Use with sockets 700-HN204/205
  • 1 700-HT3
      
    ⋆ Suppressors and timing modules easily plug into sockets (Cat. nos. 700-HN204 and 700-HN205). For use with Bulletin 700-HA relays.
    PQ = Package Quantity

    ATTENTION: Cat. No. 700-HT3 is wired with signal “S” connected to “A1”.
    See wiring diagram marked on the timer module.