Catalogs > Essential Components Catalog (Europe) > Logic > Circuit Protection > Miniature Circuit Breakers 1492-SP

Miniature Circuit Breakers 1492-SP

Introduction

Miniature Circuit Breakers, Trip Curve C Inductive, 5…10 In

Accessories

	Description	Diagram		PQ	Cat. No.
	Auxiliary contact module Switches when protective device is operated manually or tripped electrically 1 N.O. – 1 N.C. Form C Contact			1	1492-ASPH3
	Dual auxiliary contact module Switches when protective device is operated manually or tripped electrically 2 N.O. – 2 N.C. 2 Form C Contact			1	1492-ASPHH3
	Auxiliary/signal alarm contact module 1 Auxiliary Contact switches when protective device is operated manually or tripped electrically 1 N.O. – 1 N.C. Form C Contact 1 Signal Contact switches when protective device is tripped electrically 1 N.O. – 1 N.C. Form C Contact			1	1492-ASPHS3
	Undervoltage release module Use the undervoltage release module to trip the adjacent breaker poles when the applied voltage is less than the nominal voltage. Undervoltage trip is often used when loss of power and eventual restoration of power creates an unsafe or unknown set of condition.		50…115V AC	1	1492-ASPU115
			110…240V AC	1	1492-ASPU230
	Shunt trip module Use the shunt trip module to trip the adjacent breaker poles from a remote location. The module is actuated by applying a voltage (pickup voltage) to the trip terminals. Shunt trip modules are often used in emergency shutdown circuits where multiple power circuits must be switched off from a single location.		110…415V AC (110…230V DC)	1	1492-ASPA1
			12…110V AC (12…60V DC)	1	1492-ASPA2
	Mounting Rails DIN (#3) symmetrical hat rail 35 x 7.5 x 1 m			10	199-DR1
	DIN hi-rise symmetrical rail 1 m, 35 mm x 7.5 mm, 57.4 mm (2.26 in.) high Copper-free aluminum			2	1492-DR6
	DIN angled hi-rise symmetrical rail 1 m, 35 mm x 7.5 mm, 71.0 mm (2.80 in.) high Zinc-plated, chromated steel			2	1492-DR7
	End Anchor			10	1492-EAH35
	Lockout Attachment			10	1492-ASPLOA

PQ = Package Quantity

	Description	No. of 1492-SP	Rated Operational Current (I_e) [A]	PQ	Cat. No.
Incoming Terminals for fork style commoning links, IP20 protection (Not for use in North American installations)
	For max 25 mm² wire			1	1492-ASPCLT25
	For max 35 mm² wire			1	1492-ASPCLT35
Fork Style Commoning Links for 1492-SP without Auxiliary Contact Module (may not be cut)
	1 pole	2	63	20	1492-ASPCL102
	1 pole	6	63	20	1492-ASPCL106
	1 pole	12	63	20	1492-ASPCL112
	2 poles (1p + N)	2	63	10	1492-ASPCL204
	2 poles (1p + N)	3	63	10	1492-ASPCL206
	2 poles (1p + N)	6	63	10	1492-ASPCL212
	3 poles	2	63	10	1492-ASPCL306
	3 poles	4	63	10	1492-ASPCL312
	4 poles	2	63	1	1492-ASPCL408
	4 poles	3	63	1	1492-ASPCL412
Fork Style Commoning Links for 1492-SP with an Auxiliary Contact Module or Auxiliary/Signal Alarm Contact Module
	1 pole	2	63	20	1492-ASPCL1A02
	1 pole	6	63	20	1492-ASPCL1A06
	1 pole	9	63	20	1492-ASPCL1A09
	2 poles (1p + N)	2	63	10	1492-ASPCL2A04
	2 poles (1p + N)	3	63	10	1492-ASPCL2A06
	2 poles (1p + N)	5	63	10	1492-ASPCL2A10
	3 poles	2	63	10	1492-ASPCL3A06
	3 poles	4	63	10	1492-ASPCL3A12

PQ = Package Quantity

	Description	No. of 1492-SP	Rated Operational Current (I_e) [A]	PQ	Cat. No.
Fork Style Commoning Links for multiple single pole 1492-SP, each with 1 Auxiliary Contact or 1 Auxiliary/Signal Alarm Contact Module
		2x3 (1p)	63	10	1492-ASPCL3AP06
		2x3 (1p)+2 (1p)	63	10	1492-ASPCL3AP08
		3x3 (1p)	63	10	1492-ASPCL3AP09
	Protective cover for unused fork termination			5	1492-ASPCLPS
Fork Style Commoning Links (may be cut to length, not for use with accessories)
	1 pole	1 m (56 devices/m)	63	1	1492-ASPCL1
	3 poles	1 m (19 devices/m)	63	1	1492-ASPCL3
	End Cap (for 3 poles)			10	1492-ASPEC1

PQ = Package Quantity