Catalogs > Essentials Catalog (Europe) > Logic > Programmable Controllers > Accessories for MicroLogix 1000, 1200, 1500
Accessories for MicroLogix 1000, 1200, 1500
Programming SoftwareThe RSLogix 500 ladder logic programming package helps you maximize performance, save project development time, and improve productivity. This product has been developed to operate on Windows 98 and above operating system. RSLogix 500 can be used for programming both the SLC 500 and MicroLogix controller families.
| Description | Cat. No. |
| RSLogix 500 Starter Edition Progr. Software for MicroLogix controller families. (CD-ROM) | 9324-RL0100ENE |
| RSLogix 500 Standard Edition Programming Software for SLC 500 and MicroLogix controller families. (CD-ROM) | 9324-RL0300ENE |
| RSLogix 500 Professional Edition. CD-ROM also includes RSLogix Emulate 500, RSNetworx for DeviceNet and RSNetworx for ControlNet. | 9324-RL0700NXENE |
Programming Cable for MicroLogix 1000, 1100, 1200, and 1500 Channel 0 (8-pin Mini DIN)
| Description | Length | Cable Type | Cat. No. |
| Cable to connect MicroLogix controller to an IBM compatible PC | 2 m | 8-pin Mini DIN to 9-pin D Shell |
1761-CBL-PM02 |
Programming Cable for MicroLogix 1500 with 1764-LRP Processor, Channel 1 (9-pin RS-232)
| Description | Length | Cable Type | Cat. No. |
| Cable to connect port 1 to the 9-Pin DTE port of a personal computer | 3 m | 9-pin D Shell to 9-pin D Shell |
1747-CP3 |
| Cable to connect the MicroLogix 1500 base port to an IBM compatible PC | 2 m | 9-pin D Shell to 8-pin Mini DIN |
1761-CBL-PM02 |
| Note: Only cables of series C or later can be used with MicroLogix 1100 | |||
Wiring Systems for MicroLogix 1200 and 1500, see Wiring System Selection Bulletin 1492 in chapter Connectivity.
Network Interface Devices
|
|
|
|
||
| 1761-NET-AIC+ | 1761-NET-DNI | 1761-NET-ENI |
| Description | Cat. No. |
| AIC+ Advanced Interface Converter: The AIC+ provides an interface to DH-485 networks from an RS-232 port. It can be used with all MicroLogix controllers, SLC 5/03 and higher, and a number of PanelView terminals. |
1761-NET-AIC |
| DNI DeviceNet Interface: Peer-to-peer messaging between MicroLogix controllers and other devices using the DF1 Full-Duplex protocol (real time communications no polling required) |
1761-NET-DNI |
| ENI Ethernet Interface: The ENI provides EtherNet/IP connectivity for all MicroLogix controllers and other DF1 Full-Duplex devices: The ENIW provides also a basic level of Web Server functionality including: |
1761-NET-ENI |
| 1761-NET-ENIW | |
| Note: External power is required for the network interface. The MicroLogix 1100 RS232/485 port does not provide any power for connected devices. | |
Network Cable
Use the communication cables listed below with MicroLogix 1000, 1100, 1200 and 1500 controllers. Cables come in several lengths and connector styles to provide connectivity between MicroLogix controllers and other devices.
| Description | Connectors | Length | Cat. No. |
| Used to connect MicroLogix controller to Port 2 of 1761-NET-AIC+ or 1761-NET-DNI or 1761-HHP or PanelView | 8-pin Mini DIN to 8-pin Mini DIN |
0.5 m | 1761-CBL-AM00 |
| 2 m | 1761-CBL-HM02 | ||
| 5 m | 2711-CBL-HM05 | ||
| 10 m | 2711-CBL-HM10 | ||
| Used to connect MicroLogix 1500 Processor (LRP) or Port 1 of 1761-NET-AIC+ to 9-pin DTE of Personal Computer | 9-pin D Shell to 9-pin D Shell |
0.5 m | 1761-CBL-AC00 |
| 3 m | 1747-CP3 | ||
| Used to connect MicroLogix controller to Port 1 of 1761-NET-AIC+ or MicroLogix controller to PC or PanelView's to MicroLogix controller | 8-pin Mini DIN to 9-pin D Shell |
0.5 m | 1761-CBL-AP00 |
| 2 m | 1761-CBL-PM02 | ||
| 5 m | 2711-CBL-PM05 | ||
| 10 m | 2711-CBL-PM10 | ||
| Note: Do not connect a MicroLogix 1100 controller to another MicroLogix family controller such as MicroLogix 1000, 1200 or 1500 using a 1761-CBL-AM00 (8-pin Mini DIN to 8-pin Mini DIN) cable or equivalent. This type connection will cause damage to the RS-232/485 communication port (Channel 0) of the MicroLogix 1100 and/or the controller itself. |
|||
