Multi-Operators
2-Function Momentary Multi-Operator, Non-Illuminated ⋆
|
Position 1 of the latch (left position when viewed from the back) corresponds to position C of the operator. Position 2 of the latch (right position when viewed from the back) corresponds to position A of the operator. |
|
| 2-Function Momentary Multi-Operator, Non-Illuminated |
| Position A | Position C | 2-Function Multi-Operator | ||||
| Color | Type | Text | Color | Type | Text | Cat. No. |
| Red | Extended | Blank | Green | Flush | Blank | 800FP-U2E4F3 |
| O | I | 800FP-U2EFFE | ||||
| STOP | START | 800FP-U2EBFA | ||||
| ⋆ No Type 13 rating. | ||||||
2-Function Momentary Multi-Operator, Illuminated ⋆
|
Position 1 of the latch (left position when viewed from the back) corresponds to position C of the operator. Position 2 of the latch (right position when viewed from the back) corresponds to position A of the operator. Position 3 of the latch (center position) is reserved for the power module. |
|
| 2-Function Momentary Multi-Operator, Illuminated |
| Position A | Position B | Position C | 2-Function Multi-Operator | ||||
| Color | Type | Text | Type | Color | Type | Text | Cat. No. |
| Red | Extended | Blank | White Pilot Lights | Green | Flush | Blank | 800FP-LU2E4F3 |
| O | I | 800FP-LU2EFFE | |||||
| STOP | START | 800FP-LU2EBFA | |||||
| ⋆ No Type 13 rating. | |||||||
3-Function Momentary Multi-Operator, Non-Illuminated ⋆
|
Position 1 of the latch (left position when viewed from the back) corresponds to position C of the operator. Position 2 of the latch (right position when viewed from the back) corresponds to position A of the operator. Position 3 of the latch (center position) corresponds to position B of the operator. |
|
| 3-Function Momentary Multi-Operator, Non-Illuminated |
| Position A | Position B | Position C | 3-Function Multi-Operator | ||||||
| Color | Type | Text | Color | Type | Text | Color | Type | Text | Cat. No. |
| Green | Flush | Blank | Red | Extended | Blank | Green | Flush | Blank | 800FP-U3F3F34 |
⋆ No Type 13 rating.
Single Turn Potentiometer Assembly ♣ ∆ ♦
|
| Single Turn Potentiometer Assembly | |
| Resistive Element | Cat. No. |
| None (Operator Only)♣ | 800FP-POT |
| 150 | 800FP-POT1 |
| 500 | 800FP-POT2 |
| 1000 | 800FP-POT3 |
| 2500 | 800FP-POT4 |
| 5000 | 800FP-POT5 |
| 10 000 | 800FP-POT6 |
| ♣ The 800FP-POT is a complete operator assembly supplied without the resistive element, used with potentiometers having a shaft diameter of 6.0 mm (0.23 in.) and a shaft length of 50.0 mm (1.97 in.), or a shaft diameter of 6.4 mm (0.25 in.) and a shaft length of 22.5 mm (0.88 in.). This operator is used with Type "J" potentiometers only. | |
| ∆ Rated 300V AC/DC, 2 W max. | |
| ♦ A latch is not needed. | |