Catalogs > Essential Components Catalog (Europe) > Connectivity > Signal Conditioners
Signal Conditioners
Product Line Overview
Bulletin 931 Analog Signal Conditioners
|
|
|
| Standard | High-Density | Universal |
Our analog signal conditioners are designed to isolate, transmit, convert and amplify analog signals in batch or continuous process applications. They are compatible with all types of integrated PLC and DCS I/O systems. You can integrate them with our PlantPAx™ Process Automation System to leverage a single control platform for batch, drives, motion control, process and safety.
Analog Signal Conditioners are designed for use with Rockwell Automation I/O systems to provide reduced installation and maintenance costs in process applications. The products are available with two way isolation (between input and output) or three way isolation (between input, output and power).
- Isolation of analog measurement and control signals with 2 way isolation (between input and output) or 3 way isolation (between input, output and power).
- Conversion of analog signals from voltage to current. (i.e. 0...10V to 4...20 mA, etc.)
- Amplification, linearization, and transmission of low level sensor signals (i.e., mV signals from thermocouples, etc.).
- Transmission of analog signals over long distances
- Provides local display using a splitter or remote status indications and alarms via relay contact closures based on the analog signals.
Bulletin 931H - High-Density Series
The modules in the High-Density series provide cost-effective analog signal conditioning in a very small package.
Bulletin 931S - Standard Series
The Bulletin 931S Standard Series of analog signal conditioners provide solutions for a wide variety of analog signals. They are available in compact sizes ranging from 12.5... 22.5 mm in width.
Bulletin 931U- Universal Series
The Bulletin 931U Universal Series of analog signal conditioners are programmable, allowing the devices to be used on a wide variety of analog signals. Two models are available, one in a 12.5mm wide housing and one in a 45mm wide housing. Both are programmable using the same software.
For detailed information on Signal Conditioners, please visit our website: www.ab.com/catalogs