Product Line Overview

Terminal Blocks Selection

  Click to enlarge - 1492_J3toJ70_4c Click to enlarge - 1492-L2toL35_4c
Bulletin 1492-J 1492-L
Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks
Features
  • Mini terminal blocks for 15 mm DIN rail

  • Terminals for 35 mm DIN rail

  • Two level terminal blocks
    — with diode
    — in forward bias or in reverse bias
    — with selectable resistor
    — with MOV

  • Two pole thermocouple blocks
    		•
  • Terminals for 35 mm DIN rail

  • Single circuit terminal blocks available in 8 colours

  • Component blocks
    — with a diode
    — in forward bias or in reverse bias
    — Resistor selectable
    — with MOV
    		•
    Approvals UR, CSA, IEC
    Accessories Test Plugs/Test Plug Adapters, End Anchors, End Barriers, Partition Plates, Side Jumpers, Centre Jumper Bars, Centre Jumper Covers, Neutral Connecting Blocks, Commoning Bus Bars, Warning Plates, Group Marking Carriers End Retainers/Group Marking Carriers, Terminal Covers, Centre Jumpers, Centre Jumper Links, QuickClamp Insulation Stops, Marker Card Adapters
    Product Selection See Screw Type Terminal Blocks 1492-J See Spring-Clamp Terminal Blocks 1492-L
      

    Power Distribution Block Selection

      Click to enlarge - PDE1183_center_sm4c
    Bulletin 1492-PDE
    Features
  • Can be mechanically connected for multiple pole requirements

  • Panel-mounting

  • IP2X Finger-safe from front
    		•
    Current Range 175…510 A
    Number of Poles 1-pole
    Distribution Block Wiring 1, 2, 4, and 8 wires per pole
    Max. Voltage Ratings 600V AC/DC
    Insulation Material Max. Temp. 125 °C (257 °F)
    Power Block Material Aluminum or Copper
    Wire Size 400 kcmil... #16 AWG per phase Cu
    Certifications CE Compliant, CSA Certified and UL Recognized
    Product Selection Page Bulletin 1492-PDE — Enclosed Power Blocks