836E Solid-State Pressure Switches

Solid-State Pressure Switches

Dual PNP Output or 4…20 mA Analog with Single PNP Output

• Media temperature range from -40…100°C (-40…212°F)
  
• Operating temperatures from -40…85°C (-40…185°F)
  
• Industry-leading four-digit 14-segment digital display
  
• Independently programmable dual PNP N.O./N.C. outputs or 4…20 mA analog outputs
  
• Accuracy is <0.5% of upper pressure range limit
  
• Repeatability is <0.2% of upper pressure range limit
  
• IP66 enclosure rating
  
• 316L stainless steel; fluorinated elastomer seals
  

Dual PNP Output

Process Connection	Pressure Range (psig)	Set Point Range (psig)	Reset Point Range (psig)	Maximum Working Pressure (psig)⋆	Cat. No.
1/4 inch NPT (female)	-15…15	-14.92…+15	-15.00…14.92	40.5	836E-DA1CC1D4
	0…60	0.30…60	0…59.70	160.5	836E-DA1EL1D4
	0…150	0.75…150	0…149.25	400.5	836E-DA1EN1D4
	0…600	3.00…600	0…597.00	1600.5	836E-DA1EQ1D4
	0…1,500	7.50…1,500	0…1,492.50	1600.5	836E-DA1ER1D4
	0…400 (bar)	2.07…413.79 (bar)	0…400 (bar)	400 (bar)	836E-DA1EU1D4
SAE 7/16-20 UNF (female)	-15…15	-14.92…+15	-15.00…14.92	40.5	836E-DA1CC2D4
	0…60	0.30…60	0…59.70	160.5	836E-DA1EL2D4
	0…150	0.75…150	0…149.25	400.5	836E-DA1EN2D4
	0…600	3.00…600	0…597.00	1600.5	836E-DA1EQ2D4
	0…1,500	7.50…1,500	0…1,492.50	1600.5	836E-DA1ER2D4
	-15…15	-14.92…+15	-15.00…14.92	40.5	836E-DA1EU2D4
G1/4 BSPP (female)	-1…1 (bar)	-1.0…+1.03 (bar)	-1.03…1 (bar)	2.7 (bar)	836E-DA1CC3D4
	0…4 (bar)	0.02…4.14 (bar)	0…4 (bar)	10.7 (bar)	836E-DA1EL3D4
	0…10 (bar)	0.05…10.30 (bar)	0…10 (bar)	26.7 (bar)	836E-DA1EN3D4
	0…40 (bar)	0.21…41.38 (bar)	0…40 (bar)	106.7 (bar)	836E-DA1EQ3D4
	0…100 (bar)	0.52…103.45 (bar)	0…100 (bar)	106.7 (bar)	836E-DA1ER3D4
	-15…15	-14.92…+15	-15.00…14.92	40.5	836E-DA1EU3D4
Recommended Cordset: 2 m (6.5 ft) 4-pin DC Micro QD / M12 (straight) ‡					889D-F4AC-2
Recommended Cordset: 2 m (6.5 ft) 4-pin DC Micro QD / M12 (right angle) ‡					889D-R4AC-2
⋆ Maximum working pressure (MWP) is the maximum pressure a switch can tolerate for an indefinite period of time. Over pressure limit is the maximum pressure a switch can tolerate for a short period of time without sustaining permanent damage. Burst pressure limit is the maximum pressure a switch can tolerate without sustaining permanent damage or leakage.
‡ Other cable lengths are available. Shielded cables may be required for some analog output applications. Refer to the On-Maschine Connectivity catalog for additional information.

4…20 mA Analog with Single PNP Output

Process Connection	Pressure Range (psig)	Set Point Range (psig)	Reset Point Range (psig)	Maximum Working Pressure (psig)⋆	Cat. No. ‡
1/4 inch NPT (female)	-15…15	-14.92…+15	-15.00…14.92	40.5	836E-DC1CC1D4
	0…60	0.30…60	0…59.70	160.5	836E-DC1EL1D4
	0…150	0.75…150	0…149.25	400.5	836E-DC1EN1D4
	0…600	3.00…600	0…597.00	1600.5	836E-DC1EQ1D4
	0…6,000	30…6000	0…5,970.00	6000	836E-DC1ER1D4
	0…6,000	0.30…6000	0…5,970.00	6,000	836E-DC1EU1D4
SAE 7/16-20 UNF (female)	-15…15	-14.92…+15	-15.00…14.92	40.5	836E-DC1CC2D4
	0…60	0.30…60	0…59.70	160.5	836E-DC1EL2D4
	0…150	0.75…150	0…149.25	400.5	836E-DC1EN2D4
	0…600	3.00…600	0…597.00	1600.5	836E-DC1EQ2D4
	0…400 (bar)	2.07…413.79 (bar)	0…400 (bar)	400 (bar)	836E-DC1ER2D4
	0…6,000	0.30…6000	0…5,970.00	6,000	836E-DC1EU2D4
G1/4 BSPP (female)	-15…15	-14.92…+15	-15.00…14.92	40.5	836E-DC1CC3D4
	0…60	0.30…60	0…59.70	160.5	836E-DC1EL3D4
	0…150	0.75…150	0…149.25	400.5	836E-DC1EN3D4
	0…600	3.00…600	0…597.00	600	836E-DC1EQ3D4
	0…100 (bar)	0.52…103.45 (bar)	0…100 (bar)	106.7 (bar)	836E-DC1ER3D4
	0…400 (bar)	2.07…413.79 (bar)	0…400 (bar)	400 (bar)	836E-DC1EU3D4
Recommended Cordset: 2 m (6.5 ft) 4-pin DC Micro QD / M12 (straight) §					889D-F4AC-2
Recommended Cordset: 2 m (6.5 ft) 4-pin DC Micro QD / M12 (right angle) §					889D-R4AC-2
⋆ Maximum working pressure (MWP) is the maximum pressure a switch can tolerate for an indefinite period of time. Over pressure limit is the maximum pressure a switch can tolerate for a short period of time without sustaining permanent damage. Burst pressure limit is the maximum pressure a switch can tolerate without sustaining permanent damage or leakage.
‡ Analog output version may be set up to output dual PNP N.O./N.C.
§ Other cable lengths are available. Shielded cables may be required for some analog output applications. Refer to the On-Maschine Connectivity catalog for additional information.

Accessories

Description	Cat. No.
1/4 in. NPT (female) adaptor	836E-NP71
7/16-20 UNF (female) adaptor	836E-NP72
G1/4 BSPP (female) adaptor	836E-NP73
1/4 in. NPT (male) adaptor	836E-NP74
7/16-20 UNF (male) adaptor	836E-NP75
G1/4 BSPP (male) adaptor	836E-NP76
Configuration Kit (includes converter cable and ReadWin 2000 software)	836E-NSR