Catalogs > Essential Components Catalog (Europe) > Sensors > Condition Sensing Switches > 836E Solid-State Pressure Switches
836E Solid-State Pressure Switches
4…20 mA Analog with Single PNP Output
| Process Connection | Pressure Range (psig) | Set Point Range (psig) | Reset Point Range (psig) | Maximum Working Pressure (psig)⋆ | Cat. No. ‡ |
| 1/4 inch NPT (female) | -15…15 | -14.92…+15 | -15.00…14.92 | 40.5 | 836E-DC1CC1D4 |
| 0…60 | 0.30…60 | 0…59.70 | 160.5 | 836E-DC1EL1D4 | |
| 0…150 | 0.75…150 | 0…149.25 | 400.5 | 836E-DC1EN1D4 | |
| 0…600 | 3.00…600 | 0…597.00 | 1600.5 | 836E-DC1EQ1D4 | |
| 0…6,000 | 30…6000 | 0…5,970.00 | 6000 | 836E-DC1ER1D4 | |
| 0…6,000 | 0.30…6000 | 0…5,970.00 | 6,000 | 836E-DC1EU1D4 | |
| SAE 7/16-20 UNF (female) | -15…15 | -14.92…+15 | -15.00…14.92 | 40.5 | 836E-DC1CC2D4 |
| 0…60 | 0.30…60 | 0…59.70 | 160.5 | 836E-DC1EL2D4 | |
| 0…150 | 0.75…150 | 0…149.25 | 400.5 | 836E-DC1EN2D4 | |
| 0…600 | 3.00…600 | 0…597.00 | 1600.5 | 836E-DC1EQ2D4 | |
| 0…400 (bar) | 2.07…413.79 (bar) | 0…400 (bar) | 400 (bar) | 836E-DC1ER2D4 | |
| 0…6,000 | 0.30…6000 | 0…5,970.00 | 6,000 | 836E-DC1EU2D4 | |
| G1/4 BSPP (female) | -15…15 | -14.92…+15 | -15.00…14.92 | 40.5 | 836E-DC1CC3D4 |
| 0…60 | 0.30…60 | 0…59.70 | 160.5 | 836E-DC1EL3D4 | |
| 0…150 | 0.75…150 | 0…149.25 | 400.5 | 836E-DC1EN3D4 | |
| 0…600 | 3.00…600 | 0…597.00 | 600 | 836E-DC1EQ3D4 | |
| 0…100 (bar) | 0.52…103.45 (bar) | 0…100 (bar) | 106.7 (bar) | 836E-DC1ER3D4 | |
| 0…400 (bar) | 2.07…413.79 (bar) | 0…400 (bar) | 400 (bar) | 836E-DC1EU3D4 | |
| Recommended Cordset: 2 m (6.5 ft) 4-pin DC Micro QD / M12 (straight) § | 889D-F4AC-2 | ||||
| Recommended Cordset: 2 m (6.5 ft) 4-pin DC Micro QD / M12 (right angle) § | 889D-R4AC-2 | ||||
| ⋆ Maximum working pressure (MWP) is the maximum pressure a switch can tolerate for an indefinite period of time. Over pressure limit is the maximum pressure a switch can tolerate for a short period of time without sustaining permanent damage. Burst pressure limit is the maximum pressure a switch can tolerate without sustaining permanent damage or leakage. | |||||
| ‡ Analog output version may be set up to output dual PNP N.O./N.C. | |||||
| § Other cable lengths are available. Shielded cables may be required for some analog output applications. Refer to the On-Maschine Connectivity catalog for additional information. | |||||