Isolator Accessories

Description

Rockwell Automation Galvanic Isolators can be daisy chained together via power bus connectors. The snap-on connectors save time and simplify wiring for power distribution and error identification on a series of modules. Each end on a string of bussed isolators is terminated with a screw terminal connector. The line fault and power supply failure line are bridged on these connectors to close the current.

Typical Wiring Diagrams


Approximate Dimensions [mm (in.)]

Dimensions are not intended to be used for installation purposes.



Figure 1: Power Bus Screw Terminal Connector



Figure 2: Power Bus T-Connector

Product Selection

Description	Approximate Dimensions [mm (in.)]	Cat. No.
Power Bus Screw Terminal Connector	See Figure 1	897H-GDRCT
Power Bus T-Connector	See Figure 2	897H-GDRC