Stopped Motion Units
|
Description
The Stopped Motion Unit (SMU) is used in applications that require the detection of stopped motion of mechanical parts of a machine. The SMU uses inductive proximity sensors to detect motion and the CU2 control unit to monitor the sensors.
The CU2 requires a PNP and an NPN output type proximity sensors. When the proximity sensors stop detecting movement, the CU2 activates its output, powering an internal solenoid. With the solenoid energized, one or two trapped keys can be removed from the SMU.
The removable trapped keys (one or two) can be used to continue the next sequence in allowing access to the hazardous area.
See the CU2 control unit for details on setting the delay time.
Additional proximity sensors can be found in the Sensors catalog.
Features
- Stopped motion detection
- NPN and PNP proximity sensors
- Timed-delay output up to 40 minutes
- Category 1 Stop
- Replaceable code barrel assembly
- Optional IP65 enclosure
The Prosafe Advantage
|
Stainless steel construction. |
Specifications
| Standards | EN292-1&2, EN1954-1, IEC/EN60204-1, EN1088, IEC/EN60947-5-1, ISO13849-1, ISO12100-1&2, ISO14119, GS-ET-19, AS4024.1 |
| Category | Cat. 1 per EN 954-1 (ISO 13849-1) |
| Certifications | CE marked for all applicable directives and BG |
| Operating Temperature [C (F)] | 0…40° (32…104°) |
| Relative Humidity | 95% |
| Electrical Life | 100,000 operations |
| Mechanical Life | 100,000 operations |
| Shear Force to Key | 15.1 kN (3398 lbs) |
| Torque to Key | 14 N•m (124 lb•in) |
| Material | Trapped key components: 316L stainless steel Face plate: 316L stainless steel Optional box: ABS plastic or stainless steel Inductive sensors: stainless steel barrel, plastic face |
| Mounting | Tamper resistant screws |
| Weight [kg (lbs)] | 2.0 (4.4) |
| Solenoid Voltage | 24V DC, 110V AC and 230V AC |
| Time Delay | 0.1 second…40 minutes |
| Zero Speed Sensors | 2x inductive sensors |
Product Selection
| Type | Solenoid Voltage | Contact Set 1 | Contact Set 2 | Cat. No. |
| Single Key Out Panel Mounted |
24V DC | 3 N.O. 40 A | 1 N.O. 20 A | 440T-MSMSE10¬ |
| 2 N.O. 20 A | 1 N.C. 20 A | 440T-MSMSE11¬ | ||
| 110V AC | 3 N.O. 40 A | 1 N.O. 20 A | 440T-MSMSE20¬ | |
| 2 N.O. 20 A | 1 N.C. 20 A | 440T-MSMSE22¬ | ||
| 230V AC | 3 N.O. 40 A | 1 N.O. 20 A | 440T-MSMSE30¬ | |
| 2 N.O. 20 A | 1 N.C. 20 A | 440T-MSMSE33¬ | ||
| Dual Key Out Panel Mounted |
24V DC | 3 N.O. 40 A | 1 N.O. 20 A | 440T-MDMSE10¬ ¬ |
| 2 N.O. 20 A | 1 N.C. 20 A | 440T-MDMSE11¬ ¬ | ||
| 110V AC | 3 N.O. 40 A | 1 N.O. 20 A | 440T-MDMSE20¬ ¬ | |
| 2 N.O. 20 A | 1 N.C. 20 A | 440T-MDMSE22¬ ¬ | ||
| 230V AC | 3 N.O. 40 A | 1 N.O. 20 A | 440T-MDMSE30¬ ¬ | |
| 2 N.O. 20 A | 1 N.C. 20 A | 440T-MDMSE33¬ ¬ | ||
| ¬ Substitute the desired primary code for this symbol (key not included). See Key Coding for code selection. | ||||
Accessories
| Description | Size | Type | Additional Information | Cat. No. |
| Stainless Steel Key | — | — | Accessories | 440T-AKEYE10¬ |
| Stainless Steel Replacement Code Barrel for Products Other than 100A RPS/RKS Units | 440T-ASCBE14¬ | |||
| Stainless Steel Weatherproof Replacement Dust Cap | 440T-ASFC10¬ | |||
| 500 mA Fuse—Bussmann Cat. No. ETF-500 mA | 500 mA @ 250V | NA | 440R-A31562 | |
| Optional IP 65 Plastic Enclosure | — | For use with 20A units | 440T-AIPB20 | |
| Optional IP 65 Plastic Enclosure | For use with 40A units | 440T-AIPB23 | ||
| Optional Stainless Steel Enclosure | For use with all units | 440T-AIPB46 | ||
| Inductive Proximity Sensor, Three-wire, DC |
12 mm | NPN | Accessories | 872C-D3NN12-E2 |
| PNP | 872C-D3NP12-E2 | |||
| 18 mm | NPN | 872C-D5NN18-E2 | ||
| PNP | 872C-D5NP18-E2 | |||
| 30 mm | NPN | 872C-D10NN30-E2 | ||
| PNP | 872C-D10NP30-E2 | |||
| ¬ Substitute the desired primary code for this symbol (key not included). See Key Coding for code selection. | ||||
Approximate Dimensions—mm (inches)
Dimensions not intended to be used for installation purposes.
|
