Bolt Interlocks
|
Description
The bolt interlocks are designed to allow access to hazardous areas when an appropriate key is inserted into the interlock. These bolt interlocks are manufactured in 316L stainless steel to provide a rugged, industrial grade method of helping prevent access through gates.
One advantage of the bolt interlocks is that there is no need to run power wires to the gate. Power is disconnected by a trapped key rotary switch on a control panel and the key is then hand-carried to the gate by the operator.
The Single Bolt interlock (SBL) is designed to be used to access hazardous areas where partial body exposure is required. The SBL is not shipped with a key. If two keys are needed for partial body access, select the Dual Bolt interlock (DBL) that requires both keys to be trapped to operate. This version of the DBL does not include the keys.
When whole body access is needed, the DBL, with one primary key and one secondary trapped key (included) should be used. The secondary key serves the function of a personnel key. This DBL allows the operator to carry the personnel key into the hazardous area. When the operator returns from the hazardous area and returns the personnel key to the DBL, the locking sequence can be reversed and the process re-started.
Features
- 316L stainless steel construction
- Single or dual key units
- Various extensions of bolt
- Direct drive push/pull operation
- Replaceable code barrel assembly
- Fitted with tamper resistant screws
- Weatherproof stainless steel dust cap as standard
The Prosafe Advantage
|
Stainless steel construction. |
Specifications
| Standards | EN292-1&2, EN1088, ISO12100-1&2, ISO14119, AS4024.1 |
| Category | Cat. 1 per EN 954-1 (ISO 13849-1) Suitable for Cat. 2, 3, or 4 systems |
| Certifications | CE marked for all applicable directives and BG; C-Tick not required |
| Operating Temperature [C (F)] | -40…80° (-40…176°) |
| Mechanical Life | 100,000 operations |
| Shear Force to Key | 15.1 kN (3398 lbs), max. |
| Torque to Key | 14 N•m (124 lb•in), max. |
| Relative Humidity | 95% |
| Weight [kg (lbs)] | SBL: 0.60 (1.32) DBL: 1.10 (2.43) |
| Material | 316L stainless steel |
| Mounting | SBL: 2 x M5 counterbored from top or 2 x M5 from underside with M5 nuts DBL: 4 x M5 counterbored from top or 4 x M5 from underside with M5 nuts |
| Bolt Diameter | 15 mm (0.59 in) |
Product Selection
| Type | Trapped Key Condition | Bolt Retracted [mm (in.)] | Bolt Extended [mm (in.)] | Cat. No. |
| Single Key | Key Trapped to Retract Bolt | 0 | 14 (0.55) | 440T-MSBLE10¬ |
| 3 (0.11) | 17 (0.66) | 440T-MSBLE11¬ | ||
| 6 (0.23) | 20 (0.78) | 440T-MSBLE12¬ | ||
| 13 (0.51) | 27 (1.06) | 440T-MSBLE13¬ | ||
| Dual Key | Both Keys Trapped to Retract Bolt | 0 | 14 (0.55) | 440T-MDBLE10¬ ¬ |
| 3 (0.11) | 17 (0.66) | 440T-MDBLE11¬ ¬ | ||
| 6 (0.23) | 20 (0.78) | 440T-MDBLE12¬ ¬ | ||
| 13 (0.51) | 27 (1.06) | 440T-MDBLE13¬ ¬ | ||
| Primary Key Trapped, Secondary Key Free to Retract Bolt | 0 | 14 (0.55) | 440T-MDBLE14¬ Ä | |
| 3 (0.11) | 17 (0.66) | 440T-MDBLE15¬ Ä | ||
| 6 (0.23) | 20 (0.78) | 440T-MDBLE16¬ Ä | ||
| 13 (0.51) | 27 (1.06) | 440T-MDBLE17¬ Ä | ||
| Dual Key with Secondary Ejector Key | 0 | 14 (0.55) | 440T-MDBLJ14¬ Ä | |
| 3 (0.11) | 17 (0.66) | 440T-MDBLJ15¬ Ä | ||
| 6 (0.23) | 20 (0.78) | 440T-MDBLJ16¬ Ä | ||
| 13 (0.51) | 20 (0.78) | 440T-MDBLJ17¬ Ä | ||
| ¬ Substitute the desired primary code for this symbol (key not included). See Key Coding for code selection. ÄSubstitute the desired secondary code for this symbol (key included). See Key Coding for code selection. |
||||
Accessories
| Description | Additional Information | Cat. No. |
| Stainless Steel Key | Accessories | 440T-AKEYE10¬ |
| Stainless Steel Replacement Code Barrel for Products Other than 100A RPS/RKS Units | 440T-ASCBE14¬ | |
| Stainless Steel Weatherproof Replacement Dust Cap | 440T-ASFC10¬ | |
| Stainless Steel Ejector Key | 440T-AKEYE13¬ | |
| ¬ Substitute the desired primary code for this symbol (key not included). See Key Coding for code selection. | ||
Approximate Dimensions—mm (inches)
Dimensions are not intended to be used for installation purposes.
|
