Catalogs > Safety Products Catalog > Safety Switches > Safety Limit Switches > NEMA Style Safety Limit Switches > 802T Plug-In Safety Limit Switches
802T Plug-In Safety Limit Switches
| Introduction |  |
Specifications | |
Range of Operation | |
Product Selection | |
| Typical Example of a Dual Channel Safety Application | |
Approximate Dimensions | |
Modifications | |
Levers | |
Metric Conduit Entry
To order a limit switch with a 20 mm conduit entry, add the suffix S6 to the cat. no. Example: 802T-APDS6.
Pre-wired Cable
To order a factory-installed pre-wired type STOOW-A cable (5-conductor), add the suffix Y plus the number of feet required. The standard cable length is 1.52 m (5 ft). Extended cable lengths are available in multiples of 1.22 m (4 ft) only.
Example: To order a limit switch with a factory-installed 1.52 m (5 ft) cable, the cat. no. would become 802T-APDY5. To order a limit switch with a factory-installed 2.44 m (8 ft) cable, the cat. no. would become 802T-APDY8.
Mini-Style Quick-Disconnect
To order an 802T pre-wired limit switch with a 5-pin (2 circuit) or 9-pin (4 circuit) mini connector, add the suffix J1 or J9 depending on desired wiring (J9 wiring not available for 4-circuit models) to the cat. no. Example: 802TAPDJ1.
| 5-Pin Mini-Type Receptacle (2 circuit) |
|
| 9-Pin Mini-Type Receptacle (4 circuit) |
|
Micro-Style Quick-Disconnect
Micro quick-disconnects are available with a 5-pin 2-keyway AC or 5-pin single keyway DC. To order a limit switch with a AC micro quick-disconnect, add the suffix R5 to the cat. no. To order a limit switch with a DC micro quick-disconnect, add the suffix D5 to the cat. no. Example: 802TAPDR5 and 802TAPDD5.
|