Guard Locking Switches

Catalogs > Safety Products Catalog > Safety Switches > Interlock Switches > Guard Locking Switches > TLS-GD2

TLS-GD2

Typical Wiring Diagrams

Red Switches		TLS1		TLS2	TLS3
Contact Configuration
		Jumper between 12 & 41			Jumper between 12 & 41 and 22 & 51
Contact Action
		BBM		BBM	BBM
8-Pin Micro (M12)
		No jumper on 12-41.			Jumper on 12-41 and 22-51.
12-Pin M23		1 and 3	Solenoid Power		1 and 3	Solenoid Power
		4 and 12	Safety A v		4 and 12	Safety A v
		7 and 8	Safety B		7 and 5	Safety B v
		9 and 10	Aux A		9 and 10	Aux A
		6 and 11	Solenoid A v		6 and 11	Solenoid A v
		2 and 5	Solenoid B		2 and 8	Solenoid B v
8-Pin Cordset 889D-F8AB-¬	Brown Blue	Solenoid Power			Solenoid Power
	Grey Red	Safety A			Safety A & Solenoid A
	Yellow Pink	Safety B			Safety B & Solenoid B
	White Green	Solenoid A			Solenoid A
12-Pin, 9-Wire Cordset 889M-F12X9AE-¬  Pink/Yellow: Not connected		Can not be used.			Brown Blue	Solenoid Power
					White Green	Safety A & Solenoid A
					Yellow Grey	Safety B & Solenoid B
					Pink Red	Aux A
12-Pin, 12-Wire Cordset 889M-F12AH-¬		Brown Grey	Solenoid Power		Brown Grey	Solenoid Power
		Pink Green	Safety A v		Pink Green	Safety A v
		White Red/Blue	Safety B		White Red	Safety B v
		Black Violet	Aux A		Black Violet	Aux A
		Grey/Pink Yellow	Solenoid A v		Grey/Pink Yellow	Solenoid A v
		Blue Red	Solenoid B		Blue Red/Blue	Solenoid B v
¬ Replace symbol with 2 (2 m), 5 (5 m) or 10 (10 m) for standard cable lengths. v See WARNING notes.

	WARNING:	To monitor independently the safety contact(s) and the solenoid feedback (TLS 1, 2 and 3):
		• The 12-wire cordset 889M-F12AH-¬  must be used AND
		• For the TLS1 and TLS2: the jumper between 12 and 41 must be removed • For the TLS3: the jumpers between 12 and 41 and 22 and 51 must be removed

	WARNING:	Monitoring of safety contact(s) and the solenoid feedback (in series) is available, when jumpers are in place:
		AND
		• For the TLS1 and TLS2: by using pins 4 and 6 on the 12-pin, M23 receptacle or Pink and Yellow wires on the 12-wire cordset (889M-F12AH-¬ ) • For the TLS3: by using pins 4 and 6 and pins 7 and 8 on the 12-pin, M23 receptacle or Pink and Yellow and White and Red/Blue wires on the 12-wire cordset (889M-F12AH-¬ )
¬  Replace symbol with 2 (2 m), 5 (5 m), or 10 (10 m) for standard cable lengths.