Non-Contact Switches

Catalogs > Safety Products Catalog > Safety Switches > Interlock Switches > Non-Contact Switches > Sipha Sensors

Sipha Sensors

Introduction Specifications Product Selection Accessories Approximate Dimensions—mm (inches) Typical Wiring Diagrams
Specifications

Safety Ratings
Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC60947-5-1, IEC/EN60947-5-3, ANSI B11.19, AS4024.1
Safety Classification Rating dependent on control unit and application.
Functional Safety Data
Note: For up-to-date information, visit http://www.ab.com/Safety/ 		B10d: > 2 x 106 operations at min.
PFHD: > 3 x 107
MTTFd: > 385 years
Dual channel interlock may be suitable for performance levels PLe or PLd (according to ISO 13849-1:2006) and for use in SIL2 or SIL3 systems (according to IEC 62061) depending on application characteristics
Certifications CE marked for all applicable directives, cULus, and TÜV
Outputs (Guard Door Closed, Actuator in Place)
Auxiliary Output Switching 300V DC, 250V AC, 0.5 A including inrush. 15V A/10 W suitable for AC/DC circuits
Operating Characteristics
Sensing Distance, Make [mm (in.)] Style S1: 5 (0.20)
Style S2: 9 (0.35)
Style S3: 5 (0.20)
Style S4: 10 (0.39)
Sensing Distance, Break [mm (in.)] Style S1: 11 (0.43)
Style S2: 12 (0.47)
Style S3: 12 (0.47)
Style S4: 13 (0.51)
Environmental
Enclosure Type Rating IP67 (NEMA 6P)
Operating Temperature [C (F)] S1, S2, S3: -10…+55° (+14…+131°)
S4 (GD2): -25…+125° (-13…+257°)
Vibration 1 mm, 10…55 Hz
Shock 30 g, 11 ms half-sine
Physical Characteristics
Cable Size 0.54 mm2 (20 AWG) 4-wire PVC Jacket OD—4 mm (0.16 in)
Material S1, S2: Molded ABS
S30 (Actuator): Polyester
S31 (Sensor): Nylon (Trogamid)
S4 (GD2): Stainless Steel
Mounting Any Position
Weight [g (lbs)] S1: Sensor: 18 (0.04); Actuator: 15 (0.03)
S2: Sensor: 20 (0.04); Actuator: 30 (0.07)
S3: Sensor: 18 (0.04) Actuator: 6 (0.01)
S4: Sensor: 150 (0.33); Actuator: 170 (0.37)