Catalogs > Safety Products Catalog > Safety Switches > Interlock Switches > Non-Contact Switches > Sipha Sensors
Sipha Sensors
| Introduction |  |
Specifications | |
Product Selection | |
Accessories | |
Approximate Dimensions | |
Typical Wiring Diagrams | |
| Housing Style | Housing Material | Safety Contacts | Auxiliary Contacts | Type | Connection | Cat. No. |
|
ABS plastic | 1 N.C. & 1 N.O. | None | S11 | 3 m Cable | 440N-S32014 |
| 10 m Cable | 440N-S32016 | |||||
| 1 N.C. | S12 | 3 m Cable | 440N-S32022 | |||
| 10 m Cable | 440N-S32032 | |||||
| 1 N.O. | S13 | 3 m Cable | 440N-S32037 | |||
| S1 | 10 m Cable | 440N-S32036 | ||||
|
None | S21 | 3 m Cable | 440N-S32015 | ||
| 10 m Cable | 440N-S32017 | |||||
| 1 N.C. | S22 | 3 m Cable | 440N-S32023 | |||
| 10 m Cable | 440N-S32033 | |||||
| 1 N.O. | S23 | 3 m Cable | 440N-S32038 | |||
| S2 | 10 m Cable | 440N-S32039 | ||||
|
Actuator— Polyester Sensor— Nylon (Trogamid) |
None | S31 | 3 m Cable | 440N-S32101 | |
| S3 | 4-Pin Micro (M12) | 440N-S32024 | ||||
|
Stainless Steel | 1 N.C. | S42 | 8-Pin Micro (M12) | 440N-S32047 | |
| 3 m Cable | 440N-S32055 | |||||
| 10 m Cable | 440N-S32056 | |||||
| 1 N.O. | S43 | 8-Pin Micro (M12) | 440N-S32046 | |||
| 3 m Cable | 440N-S32053 | |||||
| S4 | 10 m Cable | 440N-S32054 | ||||
| Note: Contacts are described with the guard door closed, that is, actuator in place. Switch is shipped complete with actuator. | ||||||
Recommended Logic Interfaces
| Housing | Supply Voltage | Safety Contacts | Auxiliary Contacts | Housing Width | Type | Cat. Page No. | Cat. No. |
|
24V AC/DC | 1 N.O. | 1 N.C. Solid State | 22.5 mm | Control Unit 1 | Sipha™ Control Units | 440N-S32013 |
|
24V AC/DC; 115/230V AC | 2 N.O. | 1 N.C. | 45 mm | Control Unit 2 | 440N-S32021 | |
|
24V AC/DC; 115/230V AC | 2 N.O. + 1 N.O. delayed | 1 N.C. | 90 mm | Sipha 6 | 440N-S32052 | |
Connection Systems
| Description | 4-Pin Micro (M12) | 8-Pin Micro (M12) |
| Cordset | 889D-F4ECA-¬ | 889D-F8AB-¬ |
| Patchcord | 889D-F4ECRM-T | 889D-F8ABDM-T |
¬ Replace symbol with 2 (2 m), 5 (5 m), or 10 (10 m) for standard cable lengths.
T Replace symbol with 1 (1 m), 2 (2 m), 3 (3 m), 5 (5 m), or 10 (10 m) for standard cable lengths.
Note: For additional information, see Safety Connection Systems.