| Description
|
Product Selection Criteria
|
Cat. No.
|
|
Connector and Cable (diameter = 5 mm (0.20 in.)
|
1 m (3.2 ft)
|
440F-A1301
|
| 2 m (6.56 ft)
|
440F-A1302
|
| 5 m (16.4 ft)
|
440F-A1305
|
| 10 m (32.8 ft)
|
440F-A1306
|
| 15 m (49.2 ft)
|
440F-A1307
|
|
Terminator
|
6 kW (yellow) resistor for series termination
|
440F-A1308
|
| 15 kW (blue) for parallel termination
|
440F-A1309
|
|
Closing Cap for profile codes (A, B, C, D, J)
|
Closing Cap material: EPDM
|
440F-A1302S
|
| Closing Cap material: NRB
|
440F-A1302N
|
|
Closing Cap for profile codes (E, F, G, H, K)
|
Used to close profiles 440F-E0310S and 440F-E1610S.
|
440F-A1303S
|
| Used to close profile 440F-E1610N.
|
440F-A1303N
|
|
Axial Connector
|
With this connector you can directly connect two profiles. Suitable for 440F-E0110S profiles.
|
440F-A0061S
|
| With this connector you can directly connect two profiles. Suitable for 440F-E0110R profiles.
|
440F-A0061N
|
|
Straight Pin Connector
|
Kit contains one pair of pins suitable for one joint.
|
440F-A0004
|
|
90° Corner Connector
|
For use with profile 440F-E0110S
|
440F-A0071S
|
| For use with profile 440F-E0110R
|
440F-A007IS
|
| For use with profile 440F-E0110N
|
440F-A007IN
|
| For use with profile 440F-E0310S
|
440F-A0073S
|
| For use with profile 440F-E1610S
|
440F-A0074S
|
| For use with profile 440F-E1610N
|
440F-A0074N
|
|
90° Corner Connector (vertical)
|
For use with profile 440F-E0110N
|
440F-A0072N
|
| For use with profile 440F-E0110S or 440F-E0110R
|
440F-A0072S
|
| For use with profile 440F-E1610N
|
440F-A0075N
|
| For use with profile 440F-E1610S
|
440F-A0075S
|
| For use with profile 440F-E0310S
|
440F-A0076S
|
|
45° Corner Connector
|
For use with profile 440F-E0110N
|
440F-A0071N45 ¬
|
|
|
| ¬ Includes two rubber strips (440F-A0005) when using profile 440F-E0110N.
|
| Description
|
Product Selection Criteria
|
Cat. No.
|
|
60° Corner Connector
|
When using profile 440F-E0110N
|
440F-A0071N60 ¬
|
| 30° Corner Connector
|
When using profile 440F-E0110N
|
440F-A24007130 ¬
|
|
|
Connector and Cable
|
Use only on Mini Profile—1 m (3.3 ft)
|
440F-A1181
|
| Use only on Mini Profile—3 m (9.8 ft)
|
440F-A1183
|
| Use only on Mini Profile—5 m (16 ft)
|
440F-A1185
|
|
|
Terminator
|
Use only on Mini Profile—8 kW (yellow) resistor for series termination
|
440F-A1186
|
|
Closing Cap
|
Use only on Mini Profile—Closing Cap material: EPDM
|
440F-A1318
|
|
Cyanocrylate Adhesive
|
Use Loctite 401 for dry applications.
Use Loctite 380E for wet applications.
|
NA
|
|
Shears
|
Use to cut profiles.
|
440F-A3084
|
|
Connection Box
|
Polycarbonate housing 53 x 53 x 35 mm (2.09 x 2.09 x 1.38 in.) complete with two pole terminal and trumpet type screw on connector with strain and relief clamp. For use with coiled cable.
|
440F-A0116
|
|
Coiled Connection Cable
|
2.5 m (8.2 ft) (extended) of flexible coiled cable. Shelf length is 889 mm (35 in.) long. OD of coil is 22 mm (0.86 in.) and OD of cable is 5 mm (0.20 in.).
|
440F-A2450
|
| 3.5 m (11.5 ft) (extended) of flexible coiled cable. Shelf length is 1270 mm (50 in.) long. OD of coil is 22 mm (0.86 in.) and OD of cable is 5 mm (0.20 in.).
|
440F-A2700
|
|
Two rubber strips
|
When using profile 440F-E0110N shelf length is 175 x 10 x 0.7 mm (6.89 x 0.39 x 0.03 in.).
|
440F-A0005
|
|
|
| ¬ Includes two rubber strips (440F-A0005) when using profile 440F-E0110N.
|
