Safety Edges

Catalogs > Safety Products Catalog > Presence Sensing Safety Devices > Safety Edges > Safedge™ Profiles

Safedge™ Profiles

Factory Assembled Examples

This is a single oil resistant profile which is 1250 mm (49.2 in.) long. The edge is terminated with a Series Termination. A 1 m (3.2 ft) cable enters straight into the closing cap. The profile is mounted on a standard aluminum C-rail.	This single profile has a sealing lip and is 490 mm (19.2 in.) long. The profile is terminated with a Series Termination. A 3 m (9.8 ft) cable enters into the right hand side of the closing cap from a plastic surface mounted controller. The profile is mounted on an aluminum rail with a vertical lip for ease of mounting. The orientation of the sealing lip to the vertical lip can be reversed by the user by sliding the profile out of the C-rail, rotating the C-rail 180° and then re-inserting the profile back into the C-rail.
This is a single oil resistant profile which is 1250 mm (49.2 in.) long. The edge is terminated with a 1 m (3.2 ft) cable. A 1 m cable enters straight into the closing cap. The profile is mounted on an aluminum C-rail with a vertical mounting lip. A control unit is not included. This edge is intended to be used in series with another length of edge which has a terminating resistor.	This is a red-colored single profile which is 3560 mm (140.15 in.) long. This profile is part of a parallel profile system, for ease of mounting, as it is terminated with a Parallel Termination. A 3 m (9.8 ft) cable enters into the left side of the closing cap. The profile is mounted on an aluminum C-rail with a horizontal lip for ease of mounting. The horizontal lip can be reversed by the user by sliding the profile out of the C-rail, rotating the C-rail and then re-inserting the profile back into the C-rail. A separate Cat. No. must be entered for the other profile.