Catalogs > Safety Products Catalog > Presence Sensing Safety Devices > Opto-electronics > Safety Light Curtains > SafeShield™ Light Curtains
SafeShield™ Light Curtains
| Introduction |  |
Specifications | |
Product Selection—Standard System | |
Product Selection | |
Product Selection (continued) | |
Approximate Dimensions | |
4. Accessories—Optional
| Accessory | Description | Cat. No. |
|
Plastic Swivel Mount Bracket (4 per package) | 442L-AF6106 (1 package per system) |
|
Metal Side Mount (4 per package) | 442L-AF6107 (1 package per system) |
|
Steel L-Mounting bracket, fixed (4 per package) | 440L-AF6102 (1 package per system) |
|
Power Supply | 1606-XLP72E |
| Input—85...265V AC Output—24V DC, 3 Amps |
||
|
Laser alignment tool | 440L-ALAT |
| SafeShield adaptor for laser alignment aid | 442L-ALBRK2 | |
|
Sliding nut kit (4 included)—Supplied with PAC | 440L-AF6105 |
|
Mounting stand | 440L-AMSTD |
5. Corner Mirror for Multi-Sided Guarding
Specially constructed glass mirrors for 2 and 3 sided safeguarding applications.
Note: Each mirror reduces maximum scan range by 10% per mirror.
| SafeShield Protective Height—mm | Narrow Corner Mirror Short-Range 0…4 m | Cat. No. | Wide Corner Mirror Long-Range 4…15 m | Cat. No. |
| 300 |
|
440L-AM0750300 |
|
440L-AM1250300 |
| 450 | 440L-AM0750450 | 440L-AM1250450 | ||
| 600 | 440L-AM0750600 | 440L-AM1250600 | ||
| 750 | 440L-AM0750750 | 440L-AM1250750 | ||
| 900 | 440L-AM0750900 | 440L-AM1250900 | ||
| 1050 | 440L-AM0751050 | 440L-AM1251050 | ||
| 1200 | 440L-AM0751200 | 440L-AM1251200 | ||
| 1350 | 440L-AM0751350 | 440L-AM1251350 | ||
| 1500 | 440L-AM0751500 | 440L-AM1251500 | ||
| 1650 | 440L-AM0751650 | 440L-AM1251650 | ||
| 1800 | 440L-AM0751800 | 440L-AM1251800 | ||
Note: Each corner mirror is supplied with two end-cap mounting brackets.
Product Selection (continued)
6. SafeShield Weld Shields
Notes:
- Two additional front screens (weld shields) are available for each cat. no.
- The additional front screen fits both on the sender and on the receiver.
- The additional front screen may be used only if the curved enclosure side is accessible.
- An additional front screen reduces the scanning range of the system by 8%. If sender and receiver each use an additional front screen, the maximum scanning range will be reduced by 16%.
| Protective Field Height—mm (in) | Cat. No. | Protective Field Height—mm (in) | Cat. No. |
| 300 | 442L-AWS300 | 1200 | 442L-AWS1200 |
| 450 | 442L-AWS450 | 1350 | 442L-AWS1350 |
| 600 | 442L-AWS600 | 1500 | 442L-AWS1500 |
| 750 | 442L-AWS750 | 1650 | 442L-AWS1650 |
| 900 | 442L-AWS900 | 1800 | 442L-AWS1800 |
| 1050 | 442L-AWS1050 | ||
7. Safety Light Curtains—Cascadable System
The Allen-Bradley Guardmaster SafeShield cascadable family of safety light curtains are ordered as a pair—transmitter and receiver—and is shipped under one catalog number. After selecting the appropriate light curtain pair, ensure that required interfaces and accessories are ordered as well.
|
Cascadable devices come with two M23 connectors; a system connector on one end of the device to connect the light curtain to your safety control system and an extension connector on the other end of the device to connect to the next light curtain segment. The maximum number of segments is three.
The first segment of a two-cascaded system and the first and second segment of a three-cascaded system must always be a cascadable device (with a connector on both ends). This allows you to connect additional segments to the system (maximum of three segments). The last segment, which is either the second segment of a two-cascaded system or the third segment of a three-cascaded can be a standard light curtain system ordered on Product Selection which would only have a connector on one end. The maximum number of beams of all segments cannot exceed 480 beams.
Resolution can be mixed between segments. For example, the first segment could be a 14 mm resolution and the second segment could be a 30 mm resolution.
|
ATTENTION: When mixing resolution of a cascaded system, ensure the proper safety distance calculations have been completed with the largest resolution. |
| Protected Height [mm (in.)] | Resolution—mm/Beams | Cat. No. | Protected Height [mm (in.)] | Resolution—mm/Beams | Cat. No. |
| 300 (12) | 14/40 | 442L-PA40314DBCD | 1200 (48) | 14/160 | 442L-PA41214DBCD |
| 30/15 | 442L-PA40330DBCD | 30/60 | 442L-PA41230DBCD | ||
| 450 (18) | 14/60 | 442L-PA40414DBCD | 1350 (54) | 14/180 | 442L-PA41314DBCD |
| 30/23 | 442L-PA40430DBCD | 30/68 | 442L-PA41330DBCD | ||
| 600 (24) | 14/80 | 442L-PA40614DBCD | 1500 (60) | 14/200 | 442L-PA41514DBCD |
| 30/30 | 442L-PA40630DBCD | 30/75 | 442L-PA41530DBCD | ||
| 750 (30) | 14/100 | 442L-PA40714DBCD | 1650 (66) | 14/220 | 442L-PA41614DBCD |
| 30/38 | 442L-PA40730DBCD | 30/83 | 442L-PA41630DBCD | ||
| 900 (36) | 14/120 | 442L-PA40914DBCD | 1800 (72) | 14/240 | 442L-PA41814DBCD |
| 30/45 | 442L-PA40930DBCD | 30/90 | 442L-PA41830DBCD | ||
| 1050 (42) | 14/140 | 442L-PA41014DBCD | |||
| 30/53 | 442L-PA41030DBCD | ||||
| To order controllers, safety relays, and accessories, refer to page 3. Safety Relay Interfaces—Optional. | |||||
Two Patchcords required (one for transmitter and one for receiver) to connect between segments
| Female Connector (Sensor End) | Cable | Cat. No. | |||
| Face View of Female | Connector Style | Pin/Wire Color | Wire Rating | Length [m (ft)] | |
|
Straight | 1 Brown 2 Blue 3 Grey 4 Pink 5 Red 6 Yellow 7 White 8 Red/Blue 9 Black 10 Violet 11 Grey/Pink 12 Green |
18 AWG 63V 8 A |
0.3 (1.0) | 889M-F12AHMU-0M3 |
| 0.6 (2.0) | 889M-F12AHMU-0M6 | ||||
| 1.0 (3.3) | 889M-F12AHMU-1 | ||||
| 2.0 (6.5) | 889M-F12AHMU-2 | ||||
| 3.0 (9.8) | 889M-F12AHMU-3 | ||||