Catalogs >
Safety Products Catalog >
Presence Sensing Safety Devices >
Opto-electronics >
Safety Light Curtains >
Perimeter Access Control (PAC)
Perimeter Access Control (PAC)
Typical Wiring Diagrams
LED indicator
| Transmitter
|
Receiver
|
| Yellow
|
sender range: high/low MCC test
|
Yellow
|
press restart switch
|
| Amber
|
operating voltage is applied
|
Amber
|
contamination
|
|
|
|
Red
|
outputs inactive
|
|
|
|
Green
|
light beam unobstructed, outputs active
|
|
|
440L Light Curtain to 440R-N23135 (MSR127RP)
Note: For the 440L PAC unit, set the DIP switches as follows:
SW 1, 5, 6, 7, 8 to “B”
SW 2, 3, 4 to “A”
The DIP switches are accessed by removing the connection cap of the receiver unit. The sender unit will not need DIP switch configuration if these receiver settings are used.
