Catalogs > Safety Products Catalog > Presence Sensing Safety Devices > Opto-electronics > Safety Light Curtains > POC Type 2 GuardShield Safe 2
POC Type 2 GuardShield Safe 2
| Introduction |  |
Applications | |
Specifications | |
Product Selection | |
Approximate Dimensions | |
Wiring Diagram for Connection to MSR126 | |
| Safety Ratings | |
| Standards | IEC/EN61496 Parts 1 and 2, UL61496 Parts 1 and 2, UL1998 |
| Safety Classification | Type 2 per IEC/EN61496. Category 2 device per EN 954-1, SIL 2 per IEC 61508, PLd per EN/ISO 13849 |
| Certifications | cULus Listed, TÜV, and CE Marked for all applicable directives |
| Power Supply | |
| Input Power, Max. | 24V DC ± 20% (Usp) |
| Maximum Residual Ripple | < 10% of Usp |
| Power Consumption | <500 mA (no load) |
| Outputs | |
| Safety Outputs | 2 PNP OSSD. 0.3 A, short-circuit protected |
| Output Voltage, Min. | Usp -1 |
| Switching Current @ Voltage, Min. | 300 mA @ 24V DC |
| Operating Characteristics | |
| Response Time | Varies by protective height |
| Indicator LEDs | ON -State, OFF-State, internal error |
| Protected Height [mm (in.)] | 120…1920 mm (4.7…75.6 in.) in 120 mm (4.7 in.) increments |
| Resolution [mm (in.)] | 30 mm (1.18 in.) |
| Scanning Range | 0…18 m (0…59 ft) |
| Synchronization | Optical, first beam adjacent to LEDs |
| Wavelength | 950 nm |
| Environmental | |
| Enclosure Type Rating | IP65 |
| Relative Humidity | 15…95% (noncondensing) |
| Operating Temperature [C (F)] | 0…55 ° (0…131 °) |
| Vibration | IEC 60068-2-6 frequency 10…55 Hz; amplitude 0.35 mm (0.01 in.) |
| Shock | IEC 60068-2-29; acceleration 10 g, pulse duration 16 ms 10…55 Hz; amplitude 0.35 mm (0.01 in.) |
| Physical Characteristics | |
| Mounting | Rear mounting, standard and adjustable (180°) |
| Weight | Varies by protective height |
| Housing Cross Section | 30 x 40 mm (1.18 x 1.57 in.) |
| Connection Type | Transmitter: 5-pin M12 micro QD Receiver: 5-pin M12 micro QD |
| Cable Length | 30 m (98.4 ft) max. |
| ILAS Laser Class | Class 2, IEC 60825-1 |