Catalogs > Safety Products Catalog > Presence Sensing Safety Devices > Opto-electronics > Safety Light Curtains > POC Type 4 GuardShield Micro 400
POC Type 4 GuardShield Micro 400
| Introduction |  |
Applications | |
Specifications | |
Product Selection | |
Approximate Dimensions | |
Wiring Diagram for Connection to MSR126 Relay | |
| Safety Ratings | |
| Standards | IEC/EN61496 Parts 1 and 2. UL61496 Parts 1 and 2, UL1998 |
| Safety Classification | Type 4 per IEC/EN61496. Category 4 device per EN 954-1, SIL 3 per IEC 61508, PLe per EN/ISO 13849 |
| Certifications | cULus Listed, TÜV, CE Marked for all applicable directives |
| Power Supply | Input power from MSR41 or MSR42 controller |
| Input Power, Max. | 24V DC ±15% |
| Maximum Residual Ripple | 5% of Vss |
| Power Consumption | 0.07 A max. (no load) |
| Outputs | |
| Micro 400 Outputs | Data output to controller (MSR41 or MSR42) |
| MSR41/MSR42 Outputs | Two 400 mA OSSD |
| Non-Safety Outputs | Auxiliary outputs from MSR41 or MSR42 controller—2 configurable 100 mA, outputs |
| Switching Current @ Voltage, Max. | 400 mA @ 24V DC |
| Operating Characteristics | |
| Response Time | 14 mm: 14…42 ms; 30 mm; 12…23 ms, varies by protective height and resolution |
| Indicator LEDs—light curtains | ON -State, OFF-State, Intensity |
| Protected Height [mm (in.)] | 150…1200 mm (5.91…47.24 in.) in 150 mm increments |
| Resolution [mm (in.)] | 14 (0.55), 30 (1.18) |
| Scanning Range/Resolution | 14 mm (0.55 in.) resolution: 0…5 m (16.4 ft) 30 mm (1.18 in.) resolution: 0…5 m (16.4 ft) |
| Synchronization | Electrical through MSR41 or MSR42 |
| Wavelength | 940 nm |
| Environmental | |
| Enclosure Type Rating | Micro 400 is IP54; MSR41 and MSR42 are IP20 |
| Relative Humidity | 15…95% (noncondensing) |
| Operating Temperature [C (F)] | 0…55 ° (14…131 °) |
| Vibration | IEC 60068-2-6; Frequency 10…55 Hz; Amplitude 0.35 mm (0.01 in.) |
| Shock | IEC 60068-2-29; Acceleration 10 g, pulse duration 16 ms 10…55 Hz; Amplitude 0.35 mm (0.01 in.) |
| Physical Characteristics | |
| Mounting | 180° adjustable mounting brackets supplied |
| Weight | Varies by protective height |
| Housing Cross Section | 15 mm x 20 mm (0.59…0.79 in.) |
| Connection Type | Transmitter/receiver: 8-pin M12 micro QD |
| Cable Length | For MSR41 and MSR42: 3, 5, and 8 m (9.8, 16.4, and 26.2 ft), max. Total system length can not exceed 10 m (32.8 ft). |
| Cascadable Patchcords | 1 and 3 m (39.37 and 118.1 in.) M12 to M12 patchcords. Total system length cannot exceed 10 m (32.8 ft) including protective height of Micro 400 (500 mm (19.8 in.)), integrated cables and patchcords from M12 connector to MSR41 or MSR42. |