22.5 mm IEC
|
Specifications
Specifications — 22.5 mm⋆
Front-of-Panel (Operators)
| Mechanical Ratings | |||
| Description | Plastic (Bulletin 800FP) | Metal (Bulletin 800FM) | |
| Vibration (assembled to panel) | Tested at 10…2000 Hz, 1.52 mm displacement (peak-to-peak) max./10 G max. for 3 hr duration, no damage | ||
| Shock | Tested at 1/2 cycle sine wave for 11 ms; no damage at 100 G | ||
| Degree of protection‡ | IP65/66 (Type 3/3R/4/4X/12/13) | IP65/66 (Type 3/3R/4/12/13) | |
| Mechanical durability per EN 60947‑5‑1 (Annex C) | 10 000 000 Cycles | Momentary push buttons, momentary mushroom | |
| 1 000 000 Cycles | Multi-function, selector switch, key selector switch, selector jog, SensEjectTM key selector switch | ||
| 500 000 Cycles | Non-illuminated push-pull E-stop | ||
| 300 000 Cycles | Twist-to-release E-stop, illuminated push-pull E-stop, alternate action push buttons | ||
| 100 000 Cycles | Potentiometer, toggle switch | ||
| Operating forces (typical with one contact block) | Flush/extended = 5 N, E-stop = 36 N Mushroom = 9 N |
||
| Operating torque (typical application with one contact block) |
Selector switch = 0.25 N•m (2.2 lb•in) | ||
| Mounting torque | Plastic | 1.7 N•m (15 lb•in) | |
| Metal | 4.4 N•m (40 lb•in) | ||
| Environmental | |||
| Temperature range (operating) | –25…+70 °C (-13…158 °F)§ | ||
| Temperature range (short term storage) | –40…+85 °C (-40…185 °F) | ||
| Humidity | 50…95% RH from 25…60 °C (77…140 °F) | ||
| ⋆ Performance Data — see Performance Data in the Industrial Controls catalog. | |||
| ‡ Momentary mushroom operators are IP65. Plastic keyed operators are IP66, Type 4/13; not Type 4X. | |||
| § Operating temperatures below 0 °C (32 °F) are based on the absence of freezing moisture and liquids, UL Recognized to 55 °C (131 °F) - Incandescent module Max 40 °C (104 °F). | |||
Back-of-Panel Components
| Electrical Ratings | ||||
| Standard contact block ratings | A600, Q600 600V AC AC 15, DC 13 to IEC/EN 60947-5-1 and UL 508, 17V, 5 mA min. |
|||
| Low voltage contact block ratings‡ | 5V, 1 mA DC min. C300, R150, AC 15, DC 13 to EN 60947-5-1 and UL 508 |
|||
| Nominal Voltage | Range | Current Draw | Frequency | |
| LED Module Ratings | 24V AC 24V DC 120V AC 240V AC |
10…29V AC 10…30V DC 70…132V AC 180…264V AC |
31 mA 24 mA 25 mA 22 mA |
50/60 Hz DC 50/60 Hz 50/60 Hz |
| Thermal current | 10 A max. enclosed (40 °C ambient) to UL508, EN 60947-5-1 | |||
| Insulation voltage (Ui) | Screw terminal = 690V, spring-clamp = 300V | |||
| Wire capacity (screw terminal)§ | #18…12 AWG (0.75…2.5 mm2) Max. (2) #14 AWG or (1) #12 AWG |
|||
| Wire capacity (spring-clamp terminal) | #18…14 AWG (0.75…1.5 mm2) One per spring clamp, two spring clamps per terminal | |||
| Recommended tightening torque on screw terminals | 0.7…0.9 N•m (6…8 lb•in) | |||
| Dielectric strength (minimum) | 2500V for one minute | |||
| External short circuit protection | Standard blocks | 10 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4) |
||
| Low voltage contact blocks | 6 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4) |
|||
| Electrical shock protection | Finger-safe conforming to IP2X | |||
| Mechanical Ratings | ||||
| Vibration (assembled to panel) | Tested at 10…2000 Hz, 1.52 mm displacement (peak-to-peak) max./10 G max. 6 hr | |||
| Shock | Tested at 1/2 cycle sine wave for 11 ms and no damage at 100 G max. | |||
| Contact durability per EN 60947-5-1 (Annex C) | 10 000 000 cycles | |||
| Contact operation | N.O. | Slow double make and break | ||
| N.C. | Slow double make and break — positive opening |
|||
|
||||
| N.O.E.M. | Double break / double make, early make | |||
| N.C.L.B. | Double break / double make, late break — positive opening |
|||
|
|
||||
| N.C.E.B. | Double break / double make, early break — positive opening |
|||
|
|
||||
| Push button travel to change electrical state | N.C. and N.O.E.M. | 1.5 mm (0.060 in.) | ||
| N.O. and N.C.L.B. | 2.5 mm (0.1 in.) | |||
| Operating forces (typical) | Single circuit contact block | 3.4 N | ||
| Dual circuit contact block | 5…6.5 N | |||
| Illumination | ||||
| LED Dominant Wavelength | Green Red Yellow Blue White |
525 nm 629 nm 590 nm 470 nm — |
||
| LED Luminous Intensity | Green Red Yellow Blue White |
780 mcd 780 mcd 600 mcd 168 mcd 360 mcd |
||
| Incandescent maximum wattage | 2.6 W | |||
| Materials | ||||
| Springs | Stainless steel and zinc coated music wire | |||
| Electrical contacts | Standard | Silver-nickel | ||
| Low voltage | Gold-plated over silver | |||
| Terminals | Screw | Brass | ||
| Spring-clamp | Silver-plated brass | |||
| ⋆ Performance Data — see Performance Data in the Industrial Controls catalog. | ||||
| ‡ Low voltage contacts are recommended for applications below 17V, 5 mA. | ||||
| § Wires less than #18 AWG (0.75 mm2) may not hold in terminal securely. | ||||
Material Listing
| Component | For Use with | Material Used |
| Panel gasket | All operators | Nitrile, TPE |
| Diaphragm seal | Illuminated push button, non-illuminated push button | Automotive industry acceptable silicone |
| K-seal | Selector switch, key selector switch, push/twist-to-release E-stop, key E-stop, push/pull mushroom | Nitrile |
| Diaphragm retainer, return spring I | Illuminated push button, non-illuminated push button, momentary mushroom | Stainless steel |
| Return spring II | Reset, selector switch, key selector switch, alternate action, push/twist-to-release E-stop, key E-stop, push/pull mushroom |
Zinc-coated music wire |
| Button cap/mushroom head | Non-illuminated push button, momentary mushroom, reset, push/twist-to-release E-stop, key E-stop, push/pull mushroom, multi-function |
PBT/polycarbonate blend |
| 2-color molded button cap | Non-illuminated push button | PBT/polycarbonate blend |
| Lens | Multi-function | Acetal |
| Lens, knob | Illuminated push button, illuminated momentary mushroom, illuminated selector switch | Polyamide |
| Knob | Non-illuminated selector switch | Glass-filled polyamide |
| Plastic bezel/bushing I | Non-illuminated push button, illuminated push button, momentary mushroom, selector switch, key selector switch, push/twist-to-release E-stop, key E-stop, push/pull mushroom, multi-function, reset | Glass-filled polyamide |
| Plastic bezel/bushing II, jam nut | Pilot light, reset jam nut, reset pushers | Glass-filled PBT |
| Metal bezel/bushing | All metal operators | Zinc |
| Diffuser | Illuminated push button, pilot light | Polycarbonate |
| Legend frames | — | Glass-filled polyamide |
| Plastic mounting ring | All plastic operators | Glass-filled polyamide |
| Metal mounting ring | All metal operators | Chromated zinc |
| Plastic latch | — | Glass-filled polyamide |
| Metal latch | — | Chromated zinc + stainless steel |
| Plastic enclosure | — | PBT/polycarbonate blend |
| Metal enclosure | — | Aluminum |
| Terminal screws | LED module, incandescent module, contact blocks | Zinc-plated steel with chromate |
| Terminals | LED module, incandescent module, contact blocks | Brass with silver-nickel contacts |
| Spring clamps | LED module, incandescent module, contact blocks | Stainless steel |
| Lamp socket | Incandescent module | Brass |
| Housing | Incandescent module, LED module | Glass-filled polyamide |
| Low-voltage terminals | Contact blocks | Gold-plated silver-nickel contacts |
| Low-voltage spanner | Contact blocks | Gold-plated silver-nickel contacts |
| Spanner | Contact blocks | Brass with silver-nickel contacts |
| Boot | Toggle Switch, illuminated push button, non-illuminated push button, multi-function illuminated and non-illuminated | Automotive industry acceptable silicone |
Standards Compliance and Certifications
Product Certifications
| Certifications | UR/UL, CSA, CCC, CE |
| Standards Compliance — CE Marked | NEMA ICS-5; UL 508, EN ISO 13850, EN 60947-1, EN 60947-5-1, EN 60947-5-5 |
| Terminal Identification | EN/IEC 60947-1 |
| Shipping Approvals | ABS |
| RoHS | ü |
Product Selection
Emergency Stop Operators⋆
Non-Illuminated Twist-to-Release, Push-Pull
|
|
|
| 60 mm Non-Illuminated Twist-to-Release Cat. No. 800FP-MT64 |
40 mm Non-Illuminated Push-Pull Cat. No. 800FP-MP44 |
| Color | Size | Pkg. Quantity | Twist-to-Release (Trigger Action) | Push-Pull (Trigger Action) | ||
| Plastic | Metal | Plastic | Metal | |||
| Cat. No. | Cat. No. | Cat. No. | Cat. No. | |||
| Red | 30 | 1 | 800FP-MT34 | 800FM-MT34 | – | – |
| 40 | 800FP-MT44 | 800FM-MT44 | 800FP-MP44 | 800FM-MP44 | ||
| 60 | 800FP-MT64 | 800FM-MT64 | – | – | ||
Illuminated — Twist-to-Release, Push-Pull§
|
|
|
| 40 mm Illuminated Twist-to-Release Cat. No. 800FP-LMT44 |
40 mm Mushroom Push/Pull Cat. No. 800FM-LMP44 |
| Color | Size | Pkg. Quantity | Twist-to-Release (Trigger Action) | Push-Pull (Trigger Action) | ||
| Plastic | Metal | Plastic | Metal | |||
| Cat. No. | Cat. No. | Cat. No. | Cat. No. | |||
| Red | 30 | 1 | – | – | 800FP-LMP34 | 800FM-LMP34 |
| 40 | 800FP-LMT44 | 800FM-LMT44 | 800FP-LMP44 | 800FM-LMP44 | ||
| 60 | 800FP-LMT64 | 800FM-LMT64 | 800FP-LMP64 | 800FM-LMP64 | ||
| § LED module required for illumination, can not use incandescent module. | ||||||
Key Release Mushroom Operator
|
| Color | Size | Pkg. Quantity | Ronis Key Lock (Trigger Action)‡ | |
| Plastic | Metal | |||
| Cat. No. | Cat. No. | |||
| Red | 40 mm | 1 | 800FP-MK44 | 800FM-MK44 |
| ⋆ All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks. | ||||
| ‡ For key options, see the Industrial Controls catalog. | ||||
2-Position Push-Pull Operators, Non-Illuminated — Twist-to-Release (Trigger Action), Push-Pull (Trigger Action)⋆
|
|
|
||
| 40 mm Trigger Action Twist-to-Release Mushroom Cat. No. 800FP-MT44 |
40 mm Trigger Action Push-Pull Mushroom Cat. No. 800FP-MP44 |
90 mm Half-Dome Cat. No. 800FP-MP94 |
| Color | Pkg. Quantity | 40 mm Mushroom (Trigger Action) Twist-to-Release | 40 mm Mushroom (Trigger Action) Push-Pull | ||
| Plastic | Metal | Plastic | Metal | ||
| Cat. No. | Cat. No. | Cat. No. | Cat. No. | ||
| Red | 1 | 800FP-MT44 | 800FM-MT44 | 800FP-MP44 | 800FM-MP44 |
| 800F | P | – | MT4 | 4 | |||
| a | b | c | d |
| a | b | c | d§ ♣ ∆ | |||||||
| Operator Construction | Operator Type | Color Cap | Engraving | |||||||
| Code | Description | Push, Twist-to-Release♦ | Code | Color | Code | Description | ||||
| Code | Type | |||||||||
| P | Round plastic operator (IP66, Type 4/4X/13) |
MT3 | 30 mm color cap | 2 | Black | Blank | ||||
| M | Round metal operator (IP66, Type 4/13) |
MT4 | 40 mm color cap | 3 | Green | LE | EMO laser engraved | |||
| MT6 | 60 mm color cap | 4 | Red | E | EMO printed | |||||
| Push-Pull | 5 | Yellow | ||||||||
| Code | Type | 6 | Blue | |||||||
| MP4 | 40 mm color cap | |||||||||
| Half-Dome Push-Pull | ||||||||||
| Code | Type | |||||||||
| MP9 | 90 mm color cap‡ | |||||||||
⋆ All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.
♦ Only available with red color cap.
§ For EMO guards, see the Industrial Control catalog.
♣ Only available on 40 mm color cap.
∆ Only available on red, 40 mm push, twist-to-release operator type (MT44).
‡ Half-dome operators only available with black, red, and yellow color caps.
2-Position Push-Pull Operators, Illuminated — Twist-to-Release (Trigger Action), Push-Pull (Trigger Action)⋆ ‡
|
|
|
|
||
| 40 mm Illuminated Twist-to-Release Cat. No. 800FP-LMT44 |
40 mm Mushroom Push/Pull Cat. No. 800FM-LMP44 |
90 mm Half-Dome Cat. No. 800FP-LMP94 |
| Color | Pkg. Quantity | 40 mm Mushroom (Trigger Action) Twist-to-Release | 40 mm Mushroom (Trigger Action) Push-Pull | ||
| Plastic | Metal | Plastic | Metal | ||
| Cat. No. | Cat. No. | Cat. No. | Cat. No. | ||
| Red | 1 | 800FP-LMT44 | 800FM-LMT44 | 800FP-LMP44 | 800FM-LMP44 |
| 800F | P | – | LMP4 | 3 | |
| a | b | c |
| a | b | c | |||||
| Operator Construction | Operator Type | Lens Cap Color | |||||
| Code | Description | Push, Twist-to-Release§ ♣ | Code | Color | |||
| Code | Type | ||||||
| P | Round plastic operator (IP66, Type 4/4X/13) |
LMT4 | 40 mm color cap | 3 | Green | ||
| M | Round metal operator (IP66, Type 4/13) |
LMT6 | 60 mm color cap | 4 | Red | ||
| Push-Pull | 5 | Yellow♦ | |||||
| Code | Type | 6 | Blue∆ | ||||
| LMP3 | 30 mm color cap | ||||||
| LMP4 | 40 mm color cap | ||||||
| LMP6 | 60 mm color cap | ||||||
| Half-Dome Push-Pull | |||||||
| Code | Type | ||||||
| LMP9 | 90 mm color cap♠ | ||||||
⋆ LED module required for illumination, can not use incandescent module.
‡ All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.
§ Only available with red color cap.
♣ 60 mm version has black arrows; 30 and 40 mm versions have white arrows.
♦ When using LED for illumination, a white LED is recommended.
∆ Only available with 40 mm Push-Pull color cap (LMP4 from Table b).
♠ Half-dome operators only available with red and yellow lens cap colors.
2-Position Non-Illuminated Operators — Mushroom, Key Release (Trigger Action)⋆
|
| Color | Pkg. Quantity | 2-Position (Trigger Action) 40 mm Mushroom Key Release | |
| Plastic | Metal | ||
| Cat. No. | Cat. No. | ||
| Red | 1 | 800FP-MK44 | 800FM-MK44 |
| Note:For Ronis replacement keys, see the Industrial Controls catalog. Key release mushroom operators use key no. 3825. | |||
| 800F | P | – | MK4 | 4 | |||
| a | b | c | d |
| a | b | c | d | |||||||
| Operator Construction | Operator Type | Lens Cap Color | Ronis Key Lock‡ § ♣ | |||||||
| Code | Description | Key Release Mushroom | Code | Color | Code | Key No. | ||||
| P | Round plastic operator (IP66, Type 4/13) |
Code | Type | 4 | Red | Blank | 3825 (Standard) | |||
| M | Round metal operator (IP66, Type 4/13) |
MK4 | 40 mm | R | 455 | |||||
| 01R | 3801 | |||||||||
| 02R | 3802 | |||||||||
| 03R | 3803 | |||||||||
| 04R | 3804 | |||||||||
| 05R | 3805 | |||||||||
| 06R | 3806 | |||||||||
| 27R | 4001 | |||||||||
| 28R | 4002 | |||||||||
| 29R | 4003 | |||||||||
| 30R | 4004 | |||||||||
| 31R | 4005 | |||||||||
| 32R | 4006 | |||||||||
| 33R | 4007 | |||||||||
⋆ All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.
‡ Keyed operators are IP66, Type 4/13.
§ Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local Rockwell Automation sales office or Allen-Bradley distributor for interoperability information.
♣ For Ronis replacement keys, see the Industrial Controls catalog.
3-Position Push-Pull Operators, Illuminated & Non-Illuminated — Mushroom∆
|
| Target Table and Operator Position⋆ | |||
| Contact Type▶ |
|
|
|
| Out | Center | In | |
| N.O. | O | O | X |
| N.C.E.B. | X | O | O |
| N.C.L.B. | X | X | O |
| Note:X = Closed/O = Open | |||
| ▶ Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options. | |||
| Operator Function | Operator Type | Color | Pkg. Quantity | Cat. No. |
| Momentary Out, Maintained Center, Momentary In | Non-Illuminated | Black♣ | 1 | 800FM-MM42E3 |
| Green | 800FM-MM43E3 | |||
| Red | 800FM-MM44E3 | |||
| Illuminated‡ | Amber§ | 800FM-LMM40E3 | ||
| Green | 800FM-LMM43E3 | |||
| Red | 800FM-LMM44E3 | |||
| Blue§ | 800FM-LMM46E3 | |||
| Clear§ | 800FM-LMM47E3 | |||
| Momentary Out, Maintained Center, Maintained In | Non-Illuminated | Black♣ | 1 | 800FM-MP42E3 |
| Green | 800FM-MP43E3 | |||
| Red | 800FM-MP44E3 | |||
| Illuminated‡ | Amber§ | 800FM-LMP40E3 | ||
| Green | 800FM-LMP43E3 | |||
| Red | 800FM-LMP44E3 | |||
| Blue§ | 800FM-LMP46E3 | |||
| Clear§ | 800FM-LMP47E3 | |||
| ⋆ Cannot use N.C. or N.O.E.M. contact blocks with 3-position push-pull operators. Must use N.O., N.C.E.B., or N.C.L.B. contact blocks. | ||||
| ‡ Available in integrated LED version only. | ||||
| § Available in illuminated only. | ||||
| ♣ Available in non-illuminated only. | ||||
| 800F | M | – | L | MM | 4 | 4 | E3 | ||||
| a | b | c | d | e | f |
| a | b | c | |||||
| Operator Construction | Operator Type | Operator Function | |||||
| Code | Description | Code | Description | Code | Description | ||
| M | Round metal operator (IP66, Type 4/13) |
Blank | Non-Illuminated | MM | Momentary Out, Maintained Center, Momentary In |
||
| L | Illuminated‡ | MP | Momentary Out, Maintained Center, Maintained In |
||||
| d | e | f | |||||
| Cap Size | Cap Color | Positions | |||||
| Code | Description | Code | Description | Code | Description | ||
| 4 | 40 mm Plastic | 0 | Amber§ | E3 | 3-Position | ||
| 2 | Black♣ | ||||||
| 3 | Green | ||||||
| 4 | Red | ||||||
| 6 | Blue§ | ||||||
| 7 | Clear§ | ||||||
∆ Sold as stand-alone operator only. Not available as a composite catalog number.
⋆ Cannot use N.C. or N.O.E.M. contact blocks with 3-position push-pull operators. Must use N.O., N.C.E.B., or N.C.L.B. contact blocks.
‡ Available in integrated LED version only.
§ Available in illuminated only.
♣ Available in non-illuminated only.
Momentary Push Button Operators, Non-Illuminated — Mushroom⋆
|
|
|
||
| 40 mm Mushroom Cat. No. 800FM-MM42 |
60 mm Mushroom Cat. No. 800FP-MM63 |
90 mm Mushroom Cat. No. 800FP-MM94 |
| Color | Pkg. Quantity | 40 mm Mushroom | 60 mm Mushroom | ||
| Plastic | Metal | Plastic | Metal | ||
| Cat. No. | Cat. No. | Cat. No. | Cat. No. | ||
| Black | 1 | 800FP-MM42 | 800FM-MM42 | 800FP-MM62 | 800FM-MM62 |
| Green | 800FP-MM43 | 800FM-MM43 | 800FP-MM63 | 800FM-MM63 | |
| Red | 800FP-MM44 | 800FM-MM44 | 800FP-MM64 | 800FM-MM64 | |
| Yellow | 800FP-MM45 | 800FM-MM45 | 800FP-MM65 | 800FM-MM65 | |
| Blue | 800FP-MM46 | 800FM-MM46 | 800FP-MM66 | 800FM-MM66 | |
| ⋆ Momentary mushroom operators are IP65 rated. | |||||
| 800F | P | – | MM4 | 3 | |
| a | b | c |
| a | b | c | |||||
| Operator Construction | Size and Operator Type | Color Cap | |||||
| Code | Description | Mushroom | Code | Color | |||
| P | Round plastic operator (IP65, Type 4/4X/13) |
Code | Type | 2 | Black | ||
| M | Round metal operator (IP65, Type 4/13) |
MM4 | 40 mm momentary | 3 | Green | ||
| MM6 | 60 mm momentary | 4 | Red | ||||
| MM9 | 90 mm momentary‡ | 5 | Yellow | ||||
| 6 | Blue | ||||||
⋆ Momentary mushroom operators are IP65 rated.
‡ Only available with black, red, and yellow cap colors.
| c | |
| Color Cap | |
| Code | Color |
| 2 | Black |
| 3 | Green |
| 4 | Red |
| 5 | Yellow |
| 6 | Blue |
Momentary Push Button Operators, Illuminated — Mushroom⋆
|
| Color | Pkg. Quantity | 40 mm Mushroom | |
| Plastic | Metal | ||
| Cat. No. | Cat. No. | ||
| Green | 1 | 800FP-LMM43 | 800FM-LMM43 |
| Red | 800FP-LMM44 | 800FM-LMM44 | |
| Yellow | 800FP-LMM45 | 800FM-LMM45 | |
| Blue | 800FP-LMM46 | 800FM-LMM46 | |
| Clear | 800FP-LMM47 | 800FM-LMM47 | |
| 800F | P | – | LMM4 | 3 | |
| a | b | c |
| a | b | c | |||||
| Operator Construction | Size and Operator Type | Lens Cap Color | |||||
| Code | Description | Mushroom | Code | Color | |||
| P | Round plastic operator (IP65, Type 4/4X/13) |
Code | Type | 3 | Green | ||
| M | Round metal operator (IP65, Type 4/13) |
LMM4 | 40 mm momentary | 4 | Red | ||
| 5 | Yellow‡ | ||||||
| 6 | Blue | ||||||
| 7 | Clear | ||||||
⋆ Momentary mushroom operators are IP65 rated.
‡ When using LED for illumination, a white LED is recommended.
Back-of-Panel Components
Contact Blocks with Latch — Composite
| 800F | – | P | X | 0 | 1 | E | ||||
| a | b | c | d | e |
|
| a | b | c | |||||
| Style | Contact Block(s) Termination Style⋆ | N.O. (Normally Open) Circuits | |||||
| Code | Description | Code | Description | Code | Description | ||
| P | Plastic latch | X | Screw termination | 0 | No contact | ||
| M | Metal latch | Q | Spring-clamp termination | 1 | 1 N.O. | ||
| 2 | 2 N.O. | ||||||
| 3 | 3 N.O. | ||||||
| 4 | 4 N.O. | ||||||
| 5 | 5 N.O. | ||||||
| 6 | 6 N.O. | ||||||
| d | e | |||
| N.C. (Normally Closed) Circuits | Specialty Contact Block(s) | |||
| Code | Description | Code | Description | |
| 0 | No contact | Blank | Standard blocks | |
| 1 | 1 N.C. | V | Low voltage — QuadCONNECT™ | |
| 2 | 2 N.C. | E | N.O. early make | |
| 3 | 3 N.C. | L | N.C. late break | |
| 4 | 4 N.C. | S | N.C. self-monitoring | |
| 5 | 5 N.C. | |||
| 6 | 6 N.C. | |||
⋆ Six circuits maximum allowable.
Power Modules
Power Modules with Latch — Composite
| 800F | – | M | N | 3 | G | |||
| a | b | c | d |
|
| a | b | c | d | |||||||
| Style | Power Module Type§ ♣ | Voltage | Lamp Color♠ | |||||||
| Code | Description | Code | Description | Code | Description | Code | Description | |||
| P | Plastic latch | D | Incandescent module, screw termination | 0 | No bulb∆ | C | Incandescent | |||
| M | Metal latch | N | Integrated LED module, screw termination | 1 | 6V AC/DC∆ | R | Red LED | |||
| Q | Integrated LED module, spring-clamp termination | 2 | 12V AC/DC∆ | G | Green LED | |||||
| 3 | 24V AC/DC | Y | Amber LED | |||||||
| 4 | 48V AC/DC∆ | W | White LED | |||||||
| 5 | 120V AC | B | Blue LED | |||||||
| 7 | 240V AC♦ | |||||||||
§ LED modules for use with all illuminated operators. Incandescent module for use with pilot lights, momentary push buttons, and momentary mushroom operators only.
♣ Four circuits maximum allowable when power module is used. Do not stack contact block on power module.
∆ Only available for incandescent module.
♦ Only available for integrated LED module.
♠ For best illumination results, LED color should match lens color. For yellow operator, select a white LED.
Back-of-Panel Components, Continued
Power Modules with Contact Blocks and Latch — Composite
| 800F | – | P | N | 5 | R | X | 1 | 0 | E | |||||||
| a | b | c | d | e | f | g | h |
| a | b | c | d | |||||||
| Style | Power Module Type⋆ ‡ | Voltage | Lamp Color∆ | |||||||
| Code | Description | Code | Description | Code | Description | Code | Description | |||
| P | Plastic latch | D | Incandescent module, screw termination | 0 | No bulb§ | C | Incandescent | |||
| M | Metal latch | N | Integrated LED module, screw termination | 1 | 6V AC/DC§ | R | Red LED | |||
| Q | Integrated LED module, spring-clamp termination | 2 | 12V AC/DC§ | G | Green LED | |||||
| 3 | 24V AC/DC | Y | Amber LED | |||||||
| 4 | 48V AC/DC§ | W | White LED | |||||||
| 5 | 120V AC | B | Blue LED | |||||||
| 7 | 240V AC♣ | |||||||||
| e | f | g | h | |||||||
| Contact Block(s) Termination Style | N.O. (Normally Open) Circuits | N.C. (Normally Closed) Circuits | Specialty Contact Block(s) | |||||||
| Code | Description | Code | Description | Code | Description | Code | Description | |||
| X | Screw termination | 0 | No contact | 0 | No contact | Blank | Standard blocks | |||
| Q | Spring-clamp termination | 1 | 1 N.O. | 1 | 1 N.C. | V | Low voltage — QuadCONNECT™ | |||
| 2 | 2 N.O. | 2 | 2 N.C. | E | N.O. early make | |||||
| 3 | 3 N.O. | 3 | 3 N.C. | L | N.C. late break | |||||
| 4 | 4 N.O. | 4 | 4 N.C. | S | N.C. self-monitoring | |||||
⋆ Four circuits maximum allowable when power module is used. Do not stack contact block on power module.
‡ LED modules for use with all illuminated operators. Incandescent module for use with pilot lights, push buttons, and momentary mushroom operators only.
§ Only available for incandescent module.
♣ Only available for integrated LED module.
∆ For best illuminated results, LED should match lens color. For yellow operator, select a white LED.
Back-of-Panel Components, Continued
Other
| Description | Pkg. Quantity | Cat. No. | |||
|
Metal Mounting Latch These are zinc-plated, metal die cast mounting latches. Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. |
10 | 800F-ALM | ||
| Cat. No. 800F‑ALM | Note: Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces. | 100 | 800F-ALM-BP | ||
|
Plastic Mounting Latch Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. |
10 | 800F-ALP | ||
| Cat. No. 800F‑ALP | Note: Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces. | 100 | 800F-ALP-BP | ||
| Description | Contact Type | Pkg. Quantity | Cat. No. | ||
|
Contact Block Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included. |
N.O. | 10 | 800F-X10 | |
| N.C. | 800F-X01 | ||||
| N.O. low voltage — QuadCONNECT™ | 800F-X10V | ||||
| N.C. low voltage — QuadCONNECT™ | 800F-X01V | ||||
| N.O.L.M. | ∆ | 800F-X10N | |||
| N.O.E.M. | 800F-X10E | ||||
| N.O.E.E.M. | ♦ | 800F-X10M | |||
| N.C.L.B. | 800F-X01L | ||||
| N.C.E.B. | ⋆ | 800F-X01B | |||
| Self-Monitoring | ‡ | 800F-X01S | |||
| Dual circuit of 2 N.O. | ‡ | 800F-X20D | |||
| Dual circuit of 2 N.C. | ‡ | 800F-X02D | |||
| Dual circuit of 1 N.O.-1 N.C. | ‡ | 800F-X11D | |||
| N.O. with stab terminals | 800F-X10T | ||||
| N.C. with stab terminals | 800F-X01T | ||||
| N.O. spring-clamp | 800F-Q10 | ||||
| N.C. spring-clamp | 800F-Q01 | ||||
| N.O. spring-clamp low-voltage — QuadConnect™ | 800F-Q10V | ||||
| N.C. spring-clamp low-voltage — QuadConnect™ | 800F-Q01V | ||||
| N.O.E.M. spring-clamp | 800F-Q10E | ||||
| N.C.L.B. spring clamp | 800F-Q01L | ||||
| N.C.E.B. spring-clamp | ⋆ | 800F-Q01B | |||
| Ring lug N.O. | § ♣ | 800F-R10 | |||
| Ring lug N.C. | § ♣ | 800F-R01 | |||
| Cat. No. 800F‑X10 | Note: Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces. Latch not included. | N.O. | 100 | 800F-X10-BP | |
| N.C. | 800F-X01-BP | ||||
| ∆ For use with Cat. No. 800FP-CB_ and Cat. No. 800FP-CC_ operators. | |||||
| ♦ For use with Cat. No. 800FP-CC_ operators. | |||||
| ⋆ Only for use with 4-position selector switch, 4-position toggle switch, or 3-position push-pull operator. | |||||
| ‡ Cannot stack. | |||||
| § Cannot be used in a composite catalog number. | |||||
| ♣ Replacement screws are available (Cat. No. 800F-ARS1) | |||||
Back of Panel Components, Continued
Other
| Description | Volts | Pkg. Quantity | Cat. No. | ||
|
Incandescent Module For use with pilot lights, push buttons, and momentary mushroom operators. Note: Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included. |
No bulb | 10 | 800F-D0C | |
| 6V AC/DC | 800F-D1C | ||||
| 12V AC/DC | 800F-D2C | ||||
| 24V AC/DC | 800F-D3C | ||||
| 48V AC/DC | 800F-D4C | ||||
| Cat. No. 800F‑D3C | 120V AC/DC | 800F-D5C | |||
|
Integrated LED Module For use with all illuminated devices. For best results, LED should match lens color. For amber operators, use yellow LED. Note: Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included. |
24V AC/DC | 10 | ⋆ | 800F-N3x |
| 120V AC | ⋆ | 800F-N5x | |||
| 240V AC | ⋆ | 800F-N7x | |||
| 24V AC/DC spring-clamp | ⋆ | 800F-Q3x | |||
| 120V AC spring-clamp | ⋆ | 800F-Q5x | |||
| 240V AC spring-clamp | ⋆ | 800F-Q7x | |||
| Cat. No. 800F‑N3G | 24V AC/DC ring lug | ‡ § | 800F-R3x | ||
| Description | Contact Material | Pkg. Quantity | Cat. No. | ||
|
Base Mounted Contact Block Base mounted contact blocks can be used in plastic or metal enclosures. Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included. |
N.O. | 10 | 800F-BX10 | |
| N.C. | 800F-BX01 | ||||
| N.O. low voltage — QuadCONNECT™ | 800F-BX10V | ||||
| N.C. low voltage — QuadCONNECT™ | 800F-BX01V | ||||
| N.O.E.M. | 800F-BX10E | ||||
| N.C.L.B. | 800F-BX01L | ||||
| N.O. spring-clamp | 800F-BQ10 | ||||
| Cat. No. 800F‑BX01 | N.C. spring-clamp | 800F-BQ01 | |||
| Description | Volts | Pkg. Quantity | Cat. No. | ||
|
Base Mounted Integrated LED Module Base mounted modules can be used in plastic or metal enclosures. For best illumination results, LED should match lens color. Note: Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included. |
24V AC/DC | 10 | ⋆ | 800F-BN3x |
| 120V AC | ⋆ | 800F-BN5x | |||
| 240V AC | ⋆ | 800F-BN7x | |||
| 24V AC/DC spring-clamp | ⋆ | 800F-BQ3x | |||
| 120V AC spring-clamp | ⋆ | 800F-BQ5x | |||
| Cat. No. 800F‑BN3R | 240V AC spring-clamp | ⋆ | 800F-BQ7x | ||
| ⋆ To complete the cat. no., replace the x with one of the following letters for the desired color: Y = Amber, R = Red, G = Green, B = Blue, W = White. | |||||
| ‡ Cannot be used in a composite catalog number. | |||||
| § Replacement screws are available (Cat. No. 800F-ARS1) | |||||
Assembled Stations
|
1-Hole Yellow Enclosure E-Stop Station
| Enclosure Material | Quick Connect | Operator Type | Illumination Voltage | Contact Configuration | Cat. No. | ||
| PG Knockouts | Metric Knockouts | ||||||
| Plastic | N/A | Twist-to-Release 40 mm |
Non-Illuminated | 1 N.C. | 800F-1YP1 | 800F-1YM1 | |
| 1 N.O. / 1 N.C. | 800F-1YP2 | 800F-1YM2 | |||||
| 2 N.C. | 800F-1YP3 | 800F-1YM3 | |||||
| Key Release 40 mm |
1 N.C. | 800F-1YP4 | 800F-1YM4 | ||||
| 1 N.O. / 1 N.C. | 800F-1YP5 | 800F-1YM5 | |||||
| 2 N.C. | 800F-1YP6 | 800F-1YM6 | |||||
| Twist-to-Release 60 mm |
2 N.C. | 800F-1YP7 | — | ||||
| 1 N.O. / 2 N.C. | 800F-1YP8 | — | |||||
| Twist-to-Release 40 mm |
24V AC/DC | 1 N.C. | — | 800F-1YML1 | |||
| 120V AC | — | 800F-1YML2 | |||||
| 240V AC | — | 800F-1YML3 | |||||
| AC Micro⋆ | 5-pin | Non-Illuminated | 2 N.C. — Low voltage | — | 800F-1YMQ53V | ||
| 6-pin | 1 N.O. / 2 N.C. | — | 800F-1YMQA | ||||
| DC Micro⋆ | 4-pin | Non‑Illuminated/EMO/Guard | 1 N.C. | — | 800F-NX1 | ||
| Non-Illuminated | 1 N.C. | — | 800F-1YMQ1 | ||||
| 1 N.O. / 1 N.C. | — | 800F-1YMQ2 | |||||
| 2 N.C. | — | 800F-1YMQ3 | |||||
| Non‑Illuminated/EMO/Guard | — | 800F-1YMQ3VEG | |||||
| 5-pin | Non-Illuminated | — | 800F-1YMQ3V | ||||
| Mini Receptacle⋆ | 4-pin | Non-Illuminated | 1 N.C. | — | 800F-1YMQ41 | ||
| 24V AC/DC | 1 N.O. / 1 N.C. | — | 800F-1YMQ44 | ||||
| 6-pin | 24V AC/DC | 1 N.O./1 N.C. | — | 800F-1YMQ4 | |||
| 120V AC | 1 N.O. / 1 N.C. | — | 800F-1YMQ5 | ||||
| 240V AC | 1 N.O. / 1 N.C. | — | 800F-1YMQ6 | ||||
| Metal | 24V AC/DC | 1 N.O./1 N.C. | — | 800F-1MYMQ4 | |||
| 120V AC | 1 N.O./1 N.C. | — | 800F-1MYMQ5 | ||||
| 240V AC | 1 N.O./1 N.C. | — | 800F-1MYMQ6 | ||||
| ⋆ Please reference Assembled Station Pin Out Chart on Assembled Station Pin Out Chart | |||||||
1-Hole Grey Enclosure E-Stop Station
| Enclosure Material | Quick Connect | Operator Type | Illumination Voltage | Contact Configuration | Cat. No. | |
| PG Knockouts | Metric Knockouts | |||||
| Metal | N/A | Twist-to-Release 40 mm |
Non-Illuminated | 1 N.C. | — | 800F-1MM1 |
| 1 N.O. / 1 N.C. | — | 800F-1MM2 | ||||
| 2 N.C. | — | 800F-1MM3 | ||||
| Key Release 40 mm |
1 N.C. | — | 800F-1MM4 | |||
| 1 N.O. / 1 N.C. | — | 800F-1MM5 | ||||
| 2 N.C. | — | 800F-1MM6 | ||||
Grey Enclosure Assembled Stations
| Enclosure Material | Quick Connect | Operator Type | Illumination Voltage | Contact Configuration | Cat. No. | |
| PG Knockouts | Metric Knockouts | |||||
| 1-Hole Plastic | N/A | Black Push Button | Non-Illuminated | 1 N.O. | 800F-1PP1 | 800F-1PM1 |
| “0-1” 2-Position Selector Switch | 1 N.O. | 800F-1PP2 | 800F-1PM2 | |||
| "OFF-ON" 2-Position Selector Switch | 1 N.O. / 1 N.C. | 800F-1PP3 | 800F-1PM3 | |||
| ↔ (Flush Black) | 1 N.O. | 800F-1PP4 | — | |||
| 2-Hole Plastic | Start and Stop Push Buttons | 1 N.O./1 N.C. | 800F-2PP1 | — | ||
| 3-Hole Plastic | ↑ (Flush Black) O (Extended Red) ↓ (Flush Black) |
4 N.O./1 N.C. | 800F-3PP1 | — | ||
90 mm Enclosed Stations
| Enclosure Material | Quick Connect | Operator Type | Illumination Voltage | Contact Configuration | Cat. No. | |
| PG Knockouts | Metric Knockouts | |||||
| 1-Hole, Yellow Plastic | N/A | Red half dome | Non-illuminated | 1 N.C. | 800F-1YP1HD | 800F-1YM1HD |
| 1 N.O./1 N.C. | 800F-1YP2HD | 800F-1YM2HD | ||||
| 2 N.C. | 800F-1YP3HD | 800F-1YM3HD | ||||
| 24V AC/DC | 1 N.C. | — | 800F-1YML1HD | |||
| 120V AC | — | 800F-1YML2HD | ||||
| 240V AC | — | 800F-1YML3HD | ||||
| Red 90 mm momentary | Non-illuminated | 1 N.C. | 800F-1YP1M94 | 800F-1YM1M94 | ||
| 1 N.O./1 N.C. | 800F-1YP2M94 | 800F-1YM2M94 | ||||
| 2 N.C. | 800F-1YP3M94 | 800F-1YM3M94 | ||||
| 1-Hole, Grey Plastic | Black 90 mm momentary | 1 N.O./1 N.C. | 800F-1PP2M92 | 800F-1PM2M92 | ||
Accessories
Assembled Station Pin Out Chart
|
| Cat. No. | Connector Style / No. of Pins |
Location 1 | A to Pin # | B to Pin # | Location 2 | C to Pin # | D to Pin # | Location 3 | E to Pin # | F to Pin # | G to Pin # |
| 800F-1YMQ53V | AC Micro / 5-pin | BX01V | 1 | 2 | BX01V | 4 | 5 | — | — | — | 3 |
| 800F-1YMQA | AC Micro / 6-pin | BX01 | 1 | 5 | BX01 | 2 | 6 | BX10 | 3 | 4 | — |
| 800F-NX1 | DC Micro / 4-pin | BX01 | 1/4 | 2/3 | — | — | — | — | — | — | — |
| 800F-1YMQ1 | BX01 | 1/4 | 2/3 | — | — | — | — | — | — | — | |
| 800F-1YMQ2 | BX10V | 2 | 4 | BX01V | 1 | 3 | — | — | — | — | |
| 800F-1YMQ3 | BX01V | 1 | 3 | BX01V | 2 | 4 | — | — | — | — | |
| 800F-1YMQ3VEG | BX01V | 1 | 3 | BX01V | 2 | 4 | — | — | — | — | |
| 800F-1YMQ3V | DC Micro / 5-pin | BX01V | 1 | 2 | BX01V | 4 | 5 | — | — | — | 3 |
| 800F-1YMQ41 | Mini Receptacle / 4-pin | BX01 | 2 | 4 | — | — | — | — | — | — | — |
| 800F-1YMQ44 | BX10 | 1 | J | BX01 | 2 | 4 | BN3R | 3 | J | J | |
| 800F-1YMQ4 | Mini Receptacle / 6-pin | BX10 | 1 | J | BX01 | 6 | 5 | BN3R | 2 | J | J |
| 800F-1YMQ5 | BX10 | 1 | J | BX01 | 6 | 5 | BN5R | 2 | J | J | |
| 800F-1YMQ6 | BX10 | 1 | J | BX01 | 6 | 5 | BN7R | 2 | J | J | |
| 800F-1MYMQ4 | BX10 | 1 | J | BX01 | 6 | 5 | BN3R | 2 | J | J | |
| 800F-1MYMQ5 | BX10 | 1 | J | BX01 | 6 | 5 | BN5R | 2 | J | J | |
| 800F-1MYMQ6 | BX10 | 1 | J | BX01 | 6 | 5 | BN7R | 2 | J | J | |
| J = Jumper | |||||||||||
Guards
| Description | Type | Cat. No. | Pkg. Quantity | |
|
Protective Ring for use with illuminated/non-illuminated 2-position maintained and illuminated/non-illuminated 3-position mushroom operators (30 mm and 40 mm only) | Shiny metal | 800F-AMRG | 1 |
| Black | 800F-AMRGB | |||
| Cat. No. 800F-AMRG | Yellow Metal | 800F-AMRGY | ||
|
Plastic Guard for use with the following operators: |
Yellow, round | 800F-A6PR5 | |
| Cat. No. 800F-A6PR5 | ||||
|
Narrow Plastic Guard for use with the following operators: |
Yellow | 800F-AMEGY | |
| Cat. No. 800F-AMEGY | ||||
|
40 mm Protective Guard used with illuminated and non-illuminated momentary mushroom operators (40 mm) only. | Shiny Metal | 800F-AMMG | |
| Cat. No. 800F-AMMG | ||||
Emergency Stop Legend Plates♣
| 800F | – | 15YS | ||
| a | b |
|
| a | |
| Size/Color (Yellow) | |
| Code | Description |
| 15Y | 60 mm round (30.5 mm mounting hole) |
| 15YS | 60 mm round (22.5 mm mounting hole)♦ |
| 16Y | 90 mm round (22.5 mm mounting hole)♦ |
| b | |
| Text | |
| Code | Description |
| Blank | No text |
| E112 | EMERGENCY STOP |
| F112 | ARRÊT D’URGENCE♠ |
| G112 | NOT AUS |
| T112 | ARRESTO EMERGENZA |
| S112 | PARADA DE EMERGENCIA |
| B112 | EMERGENCY STOP, ARRÊT D’URGENCE, PARADA DE EMERGENCIA♠ |
| b (cont'd) | |
| Text | |
| Code | Description |
| M112 | NOT AUS, ARRESTO EMERGENZA, ARRÊT D’URGENCE▶ |
| EMERGENCY STOP, ARRÊT D’URGENCE, NOT AUS& | |
| D112 | NOODSTOP♠ |
| N112 | NÖDSTOPP, EMERGENCY STOP♠ |
| W112 | NÆDSTOPP, EMERGENCY STOP♠ |
| A112 | NÆDSTOP |
| L112 | NEYÐARSTOPP, NEYÐARSTOPP♠ |
| H112 | NÖD-STOP, HÄTÄ-SEIS, NÖD-STOP♠ |
♣ Sold only multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.
♦ Not for use with base mounted contact blocks.
♠ Not available on 15YS version.
▶ Text printed on the 15Y version only.
& Text printed on the 15YS & 16Y versions only.