Catalogs > Safety Products Catalog > Operator Interface > Two-Hand Control Devices > Touch Buttons > 800Z Zero-Force™ Touch Buttons
800Z Zero-Force™ Touch Buttons
| Introduction |  |
Standards Compliance | |
Product Selection | |
Accessories | |
Wiring Diagrams — Touch Button Terminations | |
Specifications | |
Approximate Dimensions | |
General Purpose Line — Momentary Touch Buttons
|
|
|
| General Purpose Cat. No. 800Z‑GF2Q5 |
General Purpose Cat. No. 800Z‑GL3Q5B |
| Mounting Hole Size | Input Voltage | Output Type | Electrical Connection | No Guard | Black Guard |
| Cat. No. | Cat. No. | ||||
| 30.5 mm | 85...264V AC | Relay Output | 5-Pin QD | 800Z-GF3Q5 | 800Z-GF3Q5B |
| 6 ft Cabled — 5-Wire | 800Z-GF3065 | 800Z-GF3065B | |||
| 10...40V DC and 20...30V AC | Relay Output | 5-Pin QD | 800Z-GL3Q5 | 800Z-GL3Q5B | |
| 6 ft Cabled — 5-Wire | 800Z-GL3065 | 800Z-GL3065B | |||
| 22.5 mm | 85...264V AC | Relay Output | 5-Pin QD | 800Z-GF2Q5 | 800Z-GF2Q5B |
| 6 ft Cabled — 5-Wire | 800Z-GF2065 | 800Z-GF2065B | |||
| 10...40V DC and 20...30V AC | Relay Output | 5-Pin QD | 800Z-GL2Q5 | 800Z-GL2Q5B | |
| 6 ft Cabled — 5-Wire | 800Z-GL2065 | 800Z-GL2065B | |||
| Recommended standard cordset, 2 m (6.5 ft). See DC Micro Quick Disconnect Cordset and Mini & MiniPlus Cordsets for additional lengths. | Mini-Plus Style QD Cordset, 5-Pin | 889N-F5AE-6F | 889D-F5AC-2 | ||
Use the configurator below to build a Bulletin 800Z touch button to suit your application.
| 800Z | – | G | L | 3 | 065 | B | – | |||||
| a | b | c | d | e |
| a | b | c | |||||
| Input Voltage and Output Type | Mounting Hole Size § | Electrical Connection | |||||
| Code | Description | Code | Description | Code | Description | ||
| Relay Output | Sinking/Sourcing Output ¬ | ||||||
| L | Input: 10…40V DC and 20…30V AC Output: Relay |
2 | 22.5 mm | Q4 | 4-Pin QD | ||
| F | Input: 85…264V AC Output: Relay |
3 | 30.5 mm | 064 | 6 ft (1.8 m) Cabled | ||
| Transistor Output | 124 | 12 ft (3.6 m) Cabled | |||||
| N | 10…30V DC NPN (Sinking) Output |
244 | 24 ft (7.2 m) Cabled | ||||
| P | 10…30V DC PNP (Sourcing) Output |
Relay Output T | |||||
| Q5 | 5-Pin QD | ||||||
| 065 | 6 ft (1.8 m) Cabled | ||||||
| 125 | 12 ft (3.6 m) Cabled | ||||||
| 245 | 24 ft (7.2 m) Cabled | ||||||
| d | e | |||
| Guard Option | Kit Option ‡ | |||
| Code | Description | Code | Description | |
| Blank | No Guard | Blank | No Kit | |
| B | Black Guard | K1 | 24V DC Relay Kit | |
| Y | Yellow Guard | K2 | 120V AC Relay Kit | |
| K3 | 240V AC Relay Kit | |||
Applications Detail
| LED Blink Rate | Diagnostic | Description |
| ** ** ** | Power Up | Device touched during power up. Device will resume 10 seconds after removal of hand. |
| *** *** *** | Noise Detection | Device detected an unacceptable level of noise (>20 V/m). Device will resume once noise subsides. |
| **** **** **** | Margin Detection | A conductive film is building up on the sensing surface. Device will resume once cleared. |
¬ These devices are transistor outputs.
T These devices have separate N.O. and N.C. output relays with a shared common.
‡ Safety relays should be used in 2-hand control applications. Kits not available for solid-state (transistor output) devices. Kits include 2 identical touch buttons and a safety relay. Safety relay 440R-D23171 for 24V, 440R-D23169 for 120V, 440R-D23168 for 240V.
§ 22.5 mm touch buttons use micro connector, 30.5 mm touch buttons use mini connector.
Heavy Industrial Line — Momentary Touch Buttons
|
|
|
| Heavy Industrial Cat. No. 800Z‑HF1 |
Heavy Industrial Cat. No. 800Z‑HL1Y |
| Button Type | Input Voltage | Output Type | Electrical Connection | No Guard | Yellow Guard |
| Cat. No. | Cat. No. | ||||
| Flush Mount | 10...40V DC and 20...30V AC | Relay Output | Terminal Block | 800Z-HL1 | 800Z-HL1Y |
| 85...264V AC | Relay Output | Terminal Block | 800Z-HF1 | 800Z-HF1Y | |
Use the configurator below to build a Bulletin 800Z touch button to suit your application.
| 800Z | – | H | L | 1 | Y | - | ||||
| a | b | c | d |
| a | b | c | d | |||||||
| Voltage | Mounting Type ¬ | Guard Option | Kit Option T | |||||||
| Code | Description | Code | Description | Code | Description | Code | Description | |||
| L | Input: 10…40V DC and 20…30V AC Output: Relay |
1 | Flush Mounting | Blank | No Guard | Blank | No Kit | |||
| F | Input: 85…264V AC Output: Relay |
Y | Yellow Guard | K1 | 24V DC Relay Kit | |||||
| K2 | 120V AC Relay Kit | |||||||||
| K3 | 240V AC Relay Kit | |||||||||
¬ Heavy industrial devices have an 8-position terminal block connection. See wiring diagrams on Wiring Diagrams — Touch Button Terminations for details.
T Safety relays should be used in 2-hand control applications. Kits include 2 identical touch buttons and a safety relay. Safety relay 440R-D23171 for 24V, 440R-D23169 for 120V, 440R-D23168 for 240V.
Applications Detail
| LED Blink Rate | Diagnostic | Description |
| ** ** ** | Power Up | Device touched during power up. Device will resume 10 seconds after removal of hand. |
| *** *** *** | Noise Detection | Device detected an unacceptable level of noise (>20 V/m). Device will resume once noise subsides. |
| **** **** **** | Margin Detection | A conductive film is building up on the sensing surface. Device will resume once cleared. |
Quick Disconnect Cables
|
|
|
| PD | PD |
| 889 | D | – | F | 4A | C-2 | |||
| a | b | c | d |
| a | b | c | d | |||||||
| Mounting Hole Size | QD Type | Pin Style | Cable Length/Type | |||||||
| Code | Description | Code | Description | Code | Description | Code | Description | |||
| D | 22.5 mm (Micro) | F | Straight QD Cable | 4A | 4 Pin | C-2 | 2 m (Micro) | |||
| N | 30.5 mm (Mini) | R | Right Angle QD Cable | 5A | 5 Pin ‡ | C-5 | 5 m (Micro) | |||
| C-10 | 10 m (Micro) | |||||||||
| E-6F | 6 ft. (Mini) | |||||||||
| E-12F | 12 ft. (Mini) | |||||||||
| E-20F | 20 ft. (Mini) | |||||||||
‡ No right angle QD cable (micro) for 5-PIN (Cat. No. 889D-R5A_).
Applications Detail
| LED Blink Rate | Diagnostic | Description |
| ** ** ** | Power Up | Device touched during power up. Device will resume 10 seconds after removal of hand. |
| *** *** *** | Noise Detection | Device detected an unacceptable level of noise (>20 V/m). Device will resume once noise subsides. |
| **** **** **** | Margin Detection | A conductive film is building up on the sensing surface. Device will resume once cleared. |