Catalogs > Safety Products Catalog > Operator Interface > Two-Hand Control Devices > Touch Buttons > 800Z Zero-Force™ Touch Buttons
800Z Zero-Force™ Touch Buttons
| Introduction |  |
Standards Compliance | |
Product Selection | |
Accessories | |
Wiring Diagrams — Touch Button Terminations | |
Specifications | |
Approximate Dimensions | |
Accessories — General Purpose
|
|
Description | Cat. No. | |
| Guards These guards help protect against accidental activation of the touch button surface and protect it from damage. Can be used for both the 22.5 mm and 30.5 mm mounted products. |
Yellow Plastic | 800Z-G3AG1 | ||
| Cat. No. 800Z‑G3AG1 | Cat. No. 800Z‑G3AG2 | Black Plastic | 800Z-G3AG2 | |
|
Mounting Ring Nut for 22.5 mm Holes Used on 22.5 mm devices. |
800Z-G2AH1 | ||
| Plastic Mounting Kit Cat. No. 800Z‑G2AH1 |
||||
|
Mounting Ring Nut for 30.5 mm Hole Used on 30.5 mm devices. |
800Z-G3AH1 | ||
| Plastic Mounting Kit Cat. No. 800Z‑G3AH1 |
||||
|
30.5 mm Swivel/Tilt Mounting Assembly This bracket allows you to orient the touch button in any position. It can be mounted on any vertical or horizontal surface. Compatible with 30.5 mm mounting only. |
2.25 in. (57 mm) | 60-2681 | |
| Swivel Assembly Cat. No. 60‑2439 |
1.15 in. (29 mm) | 60-2439 | ||
|
30.5 mm to 22.5 mm Hole Size Adapter This adapter allows a 22.5 mm push button operator to be installed in a panel with existing 30.5 mm mounting holes. |
Metal | 800F-AHA1 | |
| Cat. No. 800E‑AHA1 | Black Metal | 800E-AHA2 | ||
Accessories — Heavy Industrial
|
Description | Cat. No. | ||
| Guard This guard helps protects against accidental activation of the touch surface and protects it from damage. Mounting screws are included. |
Yellow Plastic | 800Z-HAG1 | ||
| Cat. No. 800Z‑HAG1 | ||||
|
|
Mounting Bases The heavy industrial line products mount directly on these bases. The conduit hub(s) come with a 3/4 inch opening. |
Single Hub | 800P-B1 |
| Single Hub Base Cat. No. 800P‑B1 |
Double Hub Base Cat. No. 800P‑B2 |
Double Hub | 800P-B2 | |
|
Adapter This adapter is used if mounting touch button onto a 4-1/2 in. x 2-3/8 in. (114.3 x 60.3 mm) enclosure pattern. |
800P-N150 | ||
| Cat. No. 800P‑N150 | ||||
|
Replacement Relay Note: Package quantity of 2. |
10...264V | 800Z-N12 | |
| Cat. No. 800Z‑N12 | ||||
|
Replacement Screws | Guard-to-Base Mounting Note: package quantity of 4 |
800Z-HAH1 | |
| Cat. No. 800Z‑HAH1 | Base Mounting Note: package quantity of 4 |
800Z-HAH2 | ||