Principles, Standards and Implementation

Catalogs > Safety Products Catalog > Principles, Standards and Implementation > Standards

Standards

Australia Standards

Most of these standards are closely aligned with the equivalent ISO/IEC/EN standards

Standards Australia Limited
286 Sussex Street,
Sydney,
NSW 2001
Phone: +61 2 8206 6000
Email: mail@standards.org.au
Website: http://www.standards.org.au

To purchase copies of standards:

SAI Global Limited
286 Sussex Street
Sydney
NSW 2001
Phone: +61 2 8206 6000
Fax: +61 2 8206 6001
Email: mail@sai-global.com
Website: http://www.saiglobal.com/shop

AS 4024.1-2006
Safeguarding of machinery. Part 1: General principles
AS 4024.1101-2006	Terminology – General
AS 4024.1201-2006	Basic terminology and methodology
AS 4024.1202-2006	Technical principles
AS 4024.1301-2006	Principles of risk assessment
AS 4024.1302-2006	Reduction of risks to health and safety from hazardous substances emitted by machinery
AS 4024.1401-2006	Design principles – Terminology and general principles
AS 4024.1501-2006	Design of safety related parts of control systems – General principles
AS 4024.1502-2006	Design of safety related parts of control systems – Validation
AS 4024.1601-2006	General requirements for the design and construction of fixed and movable guards
AS 4024.1602-2006	Principles for the design and selection of interlocks
AS 4024.1603-2006	Prevention of unexpected start up
AS 4024.1604-2006	Emergency stop – Principles for design
AS 4024.1701-2006	Basic human body measurements for technological design
AS 4024.1702-2006	Principles for determining the dimensions required for openings for whole body access to machinery
AS 4024.1703-2006	Principles for determining the dimensions required for access openings
AS 4024.1704-2006	Anthropometric data
AS 4024.1801-2006	Safety distances – Upper limbs
AS 4024.1802-2006	Safety distances – Lower limbs
AS 4024.1803-2006	Minimum gaps to prevent crushing of parts of the human body
AS 4024.1901-2006	General principles for human interaction with displays and control actuators
AS 4024.1902-2006	Displays
AS 4024.1903-2006	Control actuators
AS 4024.1904-2006	Requirements for visual, auditory and tactile signs
AS 4024.1905-2006	Requirements for marking
AS 4024.1906-2006	Requirements for the location and operation of actuators
AS 4024.1907-2006	System of auditory and visual danger and information signals

AS4024.2-1998
Safeguarding of machinery. Part 2: Installation and commissioning requirements for electro-sensitive systems—Optoelectronic devices
The basis of this standard is IEC 61496-1 and -2. Part 2 covers the installation and commissioning of light curtains specifically related to machinery safety.

AS 4024.3-1998
Safeguarding of machinery. Part 3: Manufacturing and testing requirements for electro-sensitive systems— Optoelectronic devices
The basis of this standard is IEC 61496-1 and -2. Part 3 covers the manufacturing and testing of light curtains specifically related to machinery safety.

AS4024.4-1998
Safeguarding of machinery. Part 4: Installation and commissioning requirements for electro-sensitive systems—Pressure-sensitive devices
The basis of this standard is EN 1760-1 and EN 1760-2. Part 4 covers the installation and commissioning of mats, floors, edges and bars that are used with machinery, regardless of the energy used.

AS 4024.5-1998
Safeguarding of machinery. Part 5: Manufacturing and testing requirements for electro-sensitive systems— Pressure-sensitive devices
The basis of this standard is EN1760-1 and EN1760-2. Part 5 covers the manufacturing and testing mats, floors, edges and bars that are used with machinery, regardless of the energy used.