Power Supply Unit
|
Description
The Minotaur power supply converts either 110V AC or 230V AC to 24V DC. It is intended to be used with an MSR5T or a Ferrotek noncontact interlock.
The power supply can be connected to an MSR5T and used to interface to 110V AC or 230V AC emergency stop and gate interlock control signals.
The power supply can be used to power 3 Ferrotek control units and one MSR5T for noncontact interlock protection.
Features
- 110V AC or 230V AC input
- 24V DC output
- <4V A power consumption
- 22.5 mm wide housing
Specifications
| Standards | IEC/EN 60204-1 |
| Certifications | — |
| Power Supply | 110V AC and 230V AC 50/50 Hz |
| Power Consumption | <4 W |
| Fuses, Input | 500 mA time lag (external) |
| Output | 500 mA @ 24V DC |
| Status Indicators | Red = Power on |
| Rated Impulse withstand Voltage | 3000V |
| Installation Group | C in accordance with VDE 0110 |
| Pollution Degree | 3 |
| Operating Temperature [C (F)] | -10…55° (14…131°) |
| Relative Humidity | 90% |
| Enclosure Type Rating | IP40+X149 (NEMA 1), DIN 0470 |
| Terminal Protection | IP20, DIN 0470 |
| Conductor Size, Max. | 1 x 2.5 mm2 (14AWG) stranded 1 x 4 mm2 (12AWG) solid |
| Torque Settings—terminal screws | 1 N•m (8.85 lb•in) |
| Material | Red Polycarbonate |
| Mounting Method | 35 mm DIN Rail |
| Weight [g (lb)] | 210 (0.46) |
| Vibration | 0.75 mm (0.30 in.) peak, 10…55 Hz |
| Shock | 30 g, 11 ms half sine |
Product Selection
| Description | Power Supply Output Current Rating | Cat. No. |
| 110/230V AC to 24V DC Power Supply | 500 mA @ 24V DC | 440R-A32003 |
Approximate Dimensions
Dimensions are shown in mm (in.). Dimensions are not intended to be used for installation purposes.
|
Typical Wiring Diagrams
|
