Catalogs > Safety Products Catalog > Logic > Safety Relays > Single-Function Safety Relays > MSR5T
MSR5T
| Introduction |  |
Specifications | |
Product Selection | |
Accessories | |
Approximate Dimensions | |
Block Diagram | |
Typical Wiring Diagrams | |
|
Description
The MSR5T has 1 N.C. single channel input for use with gate interlocks and emergency stop buttons in lower risk applications.
The MSR5T has output monitoring that can accommodate an automatic/manual reset function. Automatic/manual reset can use a jumper or can be used to check operation of the contacts.
The MSR5T has 3 N.O. safety outputs and 1 N.C. auxiliary output. The safety outputs have independent and redundant internal contacts to help ensure the safety function. The auxiliary contact is a nonsafety output intended to provide an external signal about the status of the safety outputs.
The Minotaur power supply converts either 110V AC or 230V AC to 24V DC. It is intended to be used with an MSR5T or a Ferrotek noncontact interlock. When used with the MSR5T, the Minotaur power supply acts like a 110V AC (230V AC) input module allowing a single channel 110V AC (230V AC) circuit to be wired directly into a safety circuit.
Features
- Category 4 per EN 954-1
- Stop category 0
- Single channel input
- Three N.O. safety outputs
- One N.C. auxiliary output
- 22.5 mm wide housing
- Optional 110/230V AC input module
Applications
|
