Catalogs > Safety Products Catalog > Logic > Safety Relays > Single-Function Safety Relays > MSR30RT/RTP
MSR30RT/RTP
| Introduction |  |
Specifications | |
Wiring Terminations | |
Product Selection | |
| Accessories | |
Approximate Dimensions | |
Block Diagram | |
Typical Wiring Diagrams | |
|
Description
The Minotaur MSR30RT/RTP is a microprocessor based, monitoring safety relay, with safety-rated, solid-state outputs.
The versatility of the MSR30RT/RTP inputs allows it to be connected to gate interlocks, e-stop devices and four-wire safety mats. The gate interlocks and e-stops can be either single channel or dual channel normally-closed circuits.
The reset capability of the MSR30RT/RTP allows it to set up for manual or automatic start and restart.
The outputs include two normally-open safety-rated outputs that can be connected to loads up to 2 A at 24V DC. These outputs can be used to send a safety stop signal to a machine or manufacturing system.
The MSR30RT/RTP also has one solid-state normally-closed auxiliary output, which must only be used to indicate the status of the MSR30RT/ RTP.
Features
- Category 4 per EN954-1
- Stop Category 0
- Two solid-state safety outputs
- One solid-state auxiliary output
- One N.C., two N.C or safety mat input
- Monitored manual or automatic/manual reset
LED Indicators
| Green | Power (Pwr) |
| Green | K1 Closed |
| Green | K2 Closed |