Catalogs > Safety Products Catalog > Logic > Safety Relays > Specialty Safety Relays > Two-Hand Relays > MSR125H/HP
MSR125H/HP
| Introduction |  |
Specifications | |
Product Selection | |
Accessories | |
Approximate Dimensions | |
Block Diagram | |
Typical Wiring Diagrams | |
|
Description
The Allen-Bradley Guardmaster Minotaur MSR125H/HP is a logic unit for monitoring and interfacing two-hand control devices with a safety-related circuit. The MSR125H/HP is for use with mechanical switches and the Rockwell Automation Bulletin 800Z Zero-Force Touch Buttons.
The MSR125H/HP has two normally open safety outputs. The safety outputs have independent and redundant internal contacts to support the safety function.
The MSR125H/HP requires the two switches to be operated within 0.5 seconds of each other and will only authorize the ON state while both switches are held down. If one of the switches is released, the output goes to the OFF state and the machine cannot be restarted until both buttons are released and then operated simultaneously.
The MSR125H/HP conforms to EN 574 Category IIIC, which gives specific requirements for two-hand control units and logic devices.
The MSR125H has fixed terminals and the MSR125HP has removable terminals.
Features
- Category 4 per EN 954-1
- Safety category IIIC per EN 574
- Two-hand control unit
- Two N.O. safety outputs
- Fixed or removable terminals
- 22.5 mm wide housing
LED Indicators
| Green | Power on |
| Green | CH1 Output Active |
| Green | CH2 Output Active |