Catalogs > Safety Products Catalog > Logic > Safety Relays > Modular Safety Relays (200 Series) > MSR230P
MSR230P
| Introduction |  |
Specifications | |
Product Selection | |
Accessories | |
Approximate Dimensions | |
Block Diagram | |
Typical Wiring Diagrams | |
|
Description
The MSR230P is an output expansion module for the modular Minotaur MSR200 family of monitoring safety relays. It can be connected to either the MSR210P or MSR211P base unit to provide additional outputs.
Up to two MSR230P output modules can be connected to one base unit by simply removing the terminator, included with each base unit, and connecting the ribbon cables of the neighboring module. The connecting ribbon cable provides power to the MSR230P as well as a check on its status. The terminators must be inserted into the final output module.
The MSR230P has four safety rated outputs that work in parallel with the safety outputs of the base unit. When the output of the base unit is activated, the outputs of the MSR230P are also activated.
The outputs are four normally open safety rated outputs. The safety outputs have independent and redundant internal contacts to help support the safety function.
Features
- Four N.O. safety outputs
- Two diagnostic LEDs
- Removable terminals
LED Indicators
| Green | Channel 1 Output ON |
| Red | Channel 1 Output OFF |
| Green | Channel 2 Output ON |
| Red | Channel 2 Output OFF |