Guard I/O

Catalogs > Safety Products Catalog > Logic > Programmable Safety Solutions > Guard I/O > 1732DS ArmorBlock Guard I/O

1732DS ArmorBlock Guard I/O

Introduction Specifications ArmorBlock Guard I/O Connections 1732DS ArmorBlock Guard I/O Micro Connector Pin Assignments 1732DS ArmorBlock Guard I/O Mini Connector Pin Assignments ArmorBlock Guard I/O Recommended Compatible Cables and Connectors Single Channel Wiring (879D-F4ACD5M and 1485P-PID5-RR4)
ArmorBlock Guard I/O Connections

Safety Products That Connect Directly to ArmorBlock Guard I/O With a Single 5-pin Micro (M12) Patchcord⋆ 
Product Family Actuator Type Cat. No. (with M12)
Elf Flat 440K-E2NNFPS
Semi-flexible 440K-E2NNAPS
Cadet Flat 440K-C2NNFPS
Semi-flexible 440K-C2NNAPS
Trojan T15 Standard 440K-V2NNSPS
Fully-flexible 440K-V2NNBPS
Trojan T15-GD2 GD2 Standard 440K-V2NNGPS
Trojan T5 Standard 440K-T2NBSPS
Fully-flexible 440K-T2NBBPS
Trojan T5-GD2 GD2 Standard 440K-T2NBGPS
MT-GD2, Case Color Red with Snap-acting Contacts None 440K-M2NBNDS
None 440K-M2NANDS
MT-GD2, Case Color Yellow, Snap-acting Contacts None 440K-M2NANYS
Sprite Solid - 50xÆ10 mm 440H-S2NNPPS
Pre-bored - 30xÆ16 mm 440H-S2NNHPS
Ensign Solid - 50xÆ10 mm 440H-E2NNPPS
Pre-bored - 30xÆ16 mm 440H-E2NNHPS
Lifeline3 N/A 440E-D2NNNYS
Lifeline4 N/A 440E-L2NNNYS
Emergency Stop N/A 800F-1YMQ53V
Safety Mats N/A 440F-MxxxHxNN
  
⋆ Only the 2 N.C. safety contacts of the safety switches are connected to the 5-pin micro (M12) connector.